Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.os.linux.networking > #3104

Re: Cant' connect to router using telnet

Show key headers only | View raw

On 28 Sep 2014 14:26:14 GMT
Kirk_Von_Rockstein <Kirk_Von_Rockstein@nowhere.invalid> wrote:

> On 2014-09-27, Johnny <johnny@invalid.net> wrote:
> >
> > I have a Motorola nvg589 and wanted to see if it's using bash.
> > According to the user's manual, it has a CLI, and it even shows how
> > to use telnet to connect and change he settings, but when I enter:
> > telnet my/ipaddress, I get this error message:  telnet: could not
> > resolve http://my.ipaddress/cgi-bin/remoteaccess.ha/telnet: Name or
> > service not known
> >
> > I had remote access enabled when I tried this.
> >
> > My ISP is ATT Uverse.
> 
> http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/26009/1/Motorola%20NVG589%20VDSL2%20Gateway.pdf
> [tiny url of above link, below:]
> http://tinyurl.com/p94ymkr
> 
> Read pages 107 - 109 of this PDF.
> Note if you have not changed the default gateway yourself
> you would run below example in a terminal from a computer
> running Mint[?] on your lan. 
> 
> telnet 192.168.1.254
> 
> You then need to login using username and password you setup with.
> 
> When logged in, you should see your terminal prompt change as
> shown on page 108.

I tried to get that manual from AT&T and Motorola, and neither one had
it.  I was lucky enough to find it on line.

I'm sure the problem is my firewall, when I try to use telnet, I can
check the firewall logs and see the connection was dropped.

Source 192.168.1.64 Destination  xx.xxx.70.41	TCP
Disallowed WAN-side management service access

It looks to me like the Source and destination are reversed?  I want to
connect to 192.168.1.64, but it is shown as the source, and my IP
address is the destination.


The problem is my old AT&T i38hg router died, and I just got this one
about a week ago.  With the old modem, I could allow or block telnet.

I'm sure I can do it with this one, but I just haven't figured out how
to do it.

This is what's being blocked right now:


Firewall Advanced

Drop packets with invalid source or destination IP address 	
Protect against port scan 	
Drop packets with unknown ether types 	
Drop packets with invalid TCP flags 	
Drop incoming ICMP Echo requests	
Flood Limit 		
Flood rate limit 	
Flood burst limit 	
Flood limit ICMP enable	
Flood limit UDP enable		
Flood limit TCP enable		
Flood limit TCP SYN-cookie	
ESP ALG

Back to comp.os.linux.networking | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Cant' connect to router using telnet Johnny <johnny@invalid.net> - 2014-09-27 10:33 -0500
  Re: Cant' connect to router using telnet Pascal Hambourg <boite-a-spam@plouf.fr.eu.org> - 2014-09-27 20:01 +0200
  Re: Cant' connect to router using telnet Kirk_Von_Rockstein <Kirk_Von_Rockstein@nowhere.invalid> - 2014-09-28 14:26 +0000
    Re: Cant' connect to router using telnet Johnny <johnny@invalid.net> - 2014-09-28 10:09 -0500
      Re: Cant' connect to router using telnet Pascal Hambourg <boite-a-spam@plouf.fr.eu.org> - 2014-09-29 11:16 +0200
      Re: Cant' connect to router using telnet Kirk_Von_Rockstein <Kirk_Von_Rockstein@nowhere.invalid> - 2014-09-30 15:11 +0000
        Re: Cant' connect to router using telnet Johnny <johnny@invalid.net> - 2014-10-03 09:58 -0500
          Re: Cant' connect to router using telnet Joe Beanfish <joebeanfish@nospam.duh> - 2014-10-04 15:16 +0000
            Re: Cant' connect to router using telnet Johnny <johnny@invalid.net> - 2014-10-04 12:04 -0500
          Re: Cant' connect to router using telnet Kirk_Von_Rockstein <Kirk_Von_Rockstein@nowhere.invalid> - 2014-10-05 16:25 +0000
            Re: Cant' connect to router using telnet Johnny <johnny@invalid.net> - 2014-10-06 14:07 -0500
              Re: Cant' connect to router using telnet Kirk_Von_Rockstein <Kirk_Von_Rockstein@nowhere.invalid> - 2014-10-07 14:33 +0000

csiph-web