Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.forth > #32523 > unrolled thread

Re: Raspberry Pi

Started bydalnefre <dale.schumacher@gmail.com>
First post2014-07-21 18:40 -0500
Last post2014-08-16 11:55 +0000
Articles 2 — 2 participants

Back to article view | Back to comp.lang.forth

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: Raspberry Pi dalnefre <dale.schumacher@gmail.com> - 2014-07-21 18:40 -0500
    Re: Raspberry Pi Unknown <dog@gmail.com> - 2014-08-16 11:55 +0000

#32523 — Re: Raspberry Pi

Fromdalnefre <dale.schumacher@gmail.com>
Date2014-07-21 18:40 -0500
SubjectRe: Raspberry Pi
Message-ID<F5udnbRDzcVoOVDOnZ2dnUVZ_q6dnZ2d@giganews.com>
If you're looking for a true bare-metal FORTH on the Raspberry Pi, you may be interested in a recent port of jonesforth that removes the dependency on Linux.

https://github.com/organix/pijFORTHos


[toc] | [next] | [standalone]


#32944

FromUnknown <dog@gmail.com>
Date2014-08-16 11:55 +0000
Message-ID<pan.2014.08.16.12.02.10@gmail.com>
In reply to#32523
On Mon, 21 Jul 2014 18:40:37 -0500, dalnefre wrote:

> If you're looking for a true bare-metal FORTH on the Raspberry Pi, you
> may be interested in a recent port of jonesforth that removes the
> dependency on Linux.
> 
> https://github.com/organix/pijFORTHos

OK, that looks interesting, but to avoid the need to buy & keep
new SDs for each such experiment; eg. TinyCore ...etc.,
I wonder if it's possible to 'fix' the SDs MSDOS booter, so that
by just dd-ing a few bytes [via your card-reader], you could
point the <load and run> to various such systems.

I don't expect the following to work, but just as a naive concept:
= if MSDOS booter jumps/starts the 1st-of-4 partitions which is
  marked-as-bootable [needs only 1 byte to be set], the simplistically
  that seems that you could direct the rPi to run different bare-metal
  aps from the same SD. Of course not without 'reprogramming' it.
OTOH perhaps you could use what I've been doing to mark sound-files
with only on on/off-switch: 
FOR i := 1 TO n
  mark the file i;
  Prompt to cutNowFor iMarked;
  restoreFileToDefaultMarking

This would allow the SD to be programmed by the last-set/run ap.

[toc] | [prev] | [standalone]


Back to top | Article view | comp.lang.forth


csiph-web