Re: RTX2000 optimization

From	rickman <gnuarm@gmail.com>
Newsgroups	comp.lang.forth
Subject	Re: RTX2000 optimization
Date	2012-10-25 16:35 -0400
Organization	A noiseless patient Spider
Message-ID	<k6c7pr$7eo$1@dont-email.me> (permalink)
References	(4 earlier) <k64t1j$nlq$1@speranza.aioe.org> <k671kb$1uc$1@dont-email.me> <k68h98$mor$1@speranza.aioe.org> <k69fbv$a6n$1@dont-email.me> <k6af1l$k0c$1@speranza.aioe.org>

Show all headers | View raw

On 10/25/2012 12:30 AM, Rod Pemberton wrote:
> "rickman"<gnuarm@gmail.com>  wrote in message
> news:k69fbv$a6n$1@dont-email.me...
>> On 10/24/2012 6:56 AM, Rod Pemberton wrote:
>>> "rickman"<gnuarm@gmail.com>   wrote in message
>>>> It seems that if the CPU isn't pipelined and blazing fast, it isn't
>>>> interesting to most FPGA users.
>>>
>>> Without pipelining, I doubt it's of interest to anyone.  The 6502
>>> proved how effective pipelining in a microprocessor is in increasing
>>> performance.
>>
>> I don't follow that.  There are lots of MCUs that aren't pipelined.  The
>> need for speed is a spectrum.  Often there are other things that are
>> more important requirements, like size.  How many LUTs is the Leon
>> processor, 5000?  Fast, but large.
>>
>
> Are we talking about the same thing?
>
> http://en.wikipedia.org/wiki/Instruction_pipeline
> http://en.wikipedia.org/wiki/Pipelining
>
> AFAIK, the 6502 was the first microprocessor with pipelining.  And, the Cray
> CDC 6600 had the first central processing unit with it.
>
> If we're talking about the same thing and a microprocessor design isn't
> using pipelining, how do you get any acceptable level of performance?  Do
> you just use faster logic and clock?

Before I can answer that question, you need to define "acceptable level 
of performance".  My entire point is that the performance needs of 
different applications vary across the spectrum.  There are costs 
associated with pipelining; it takes more gates, it uses more power and 
the performance speed up depends on the code being executed, there are 
pipeline stalls and flushes.  Pipelining is not a magic formula for 
"free" performance.  It is a tradeoff.

I think I already mentioned that my design goals had to do with 
minimizing the resources used balanced against performance.  Using one 
block RAM for the stacks, a second for instruction memory and a third 
for RAM, it only required a further 600 LUTs to implement a 16 bit 
processor.  That included a few bells and whistles that I would likely 
rip out with any further work.  This ran at 50 MHz in a 15 year old FPGA.

That level of performance was fine for the application I had.  I came 
close to using it again on a design a couple of years ago when a 
customer wanted me to upgrade an existing design.  But I was able to use 
the Lattice device at 90% without an impact on the performance so in the 
end adding the functions as logic worked out ok.

I'm looking at a design in a Lattice iCE40 device which would be the 
lowest power way of implementing this I believe.  I might use this 
processor rather than application specific logic.  We'll see.  It all 
depends on how small I can get the processor.  It may require an 8 bit 
version or even a redesign to 4 or 5 bit data paths.

Rick

Thread

RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-10-22 08:53 -0700
  Re: RTX2000 optimization Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-10-22 11:21 -0500
  Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-22 09:56 -0700
    Re: RTX2000 optimization Mark Wills <forthfreak@gmail.com> - 2012-10-22 12:10 -0700
      Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-22 12:55 -0700
      Re: RTX2000 optimization Coos Haak <chforth@hccnet.nl> - 2012-10-22 22:02 +0200
      Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-22 16:50 -0400
        Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-22 21:52 -0400
          Re: RTX2000 optimization Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-10-22 22:03 -0700
            Re: RTX2000 optimization Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-10-23 03:19 -0500
              Re: RTX2000 optimization vandys@vsta.org - 2012-10-23 17:54 +0000
                Re: RTX2000 optimization Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-10-24 08:16 -0700
          Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-23 17:19 -0400
            Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-24 06:56 -0400
              Re: RTX2000 optimization anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-10-24 12:26 +0000
              Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 15:25 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-25 00:30 -0400
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-24 22:10 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 16:43 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-26 17:55 +0200
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 19:44 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-27 02:17 +0200
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 23:01 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-27 22:18 +0200
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-27 19:19 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-28 04:21 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-28 14:36 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-29 19:06 -0400
                Re: RTX2000 optimization Mark Wills <markrobertwills@yahoo.co.uk> - 2012-10-30 02:07 -0700
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-30 09:36 -0400
                Re: RTX2000 optimization Mark Wills <markrobertwills@yahoo.co.uk> - 2012-10-30 08:09 -0700
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-30 19:14 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-30 18:50 -0400
                Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-10-31 07:37 -0700
                Re: RTX2000 optimization stephenXXX@mpeforth.com (Stephen Pelc) - 2012-10-31 15:27 +0000
                Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-10-31 08:59 -0700
                Re: RTX2000 optimization Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-10-31 11:18 -0500
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-31 13:49 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-31 13:43 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-31 12:03 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Mark Wills <forthfreak@gmail.com> - 2012-10-31 09:05 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] daveyrotten <danw8804@gmail.com> - 2012-10-31 09:06 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-10-31 09:25 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] danw8804@gmail.com - 2012-10-31 09:38 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-10-31 14:30 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-10-31 14:27 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-10-31 12:01 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-10-31 16:31 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-10-31 20:33 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-01 14:05 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-01 11:23 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-01 14:31 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-02 22:11 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-03 12:50 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-03 10:42 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-03 13:59 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-03 12:10 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-03 15:42 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-03 15:56 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-03 20:53 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] stephenXXX@mpeforth.com (Stephen Pelc) - 2012-11-04 11:10 +0000
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-04 22:58 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-05 15:29 +0100
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-11-05 14:40 +0000
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-05 11:36 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-05 09:02 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-05 15:22 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-05 12:56 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-06 12:22 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-06 09:29 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-06 12:53 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-06 10:00 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] "Elizabeth D. Rather" <erather@forth.com> - 2012-11-06 08:04 -1000
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-06 13:37 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-05 21:06 +0100
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-05 15:29 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-06 16:28 +0100
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] rickman <gnuarm@gmail.com> - 2012-11-06 12:50 -0500
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-07 20:29 -0800
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] albert@spenarnc.xs4all.nl (Albert van der Horst) - 2012-11-04 10:40 +0000
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-01 21:26 +0100
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] Paul Rubin <no.email@nospam.invalid> - 2012-11-01 13:44 -0700
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-11-02 04:03 -0400
                Re: Xula-200 or Raspberry-Pi a better buy?, was [Re: RTX2000 optimization] David Schultz <abuse@127.0.0.1> - 2012-11-04 17:17 -0600
                Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-11-02 12:48 -0700
                Re: RTX2000 optimization "Elizabeth D. Rather" <erather@forth.com> - 2012-11-02 10:25 -1000
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-11-02 19:54 -0700
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-03 17:47 +0100
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-11-03 14:05 -0400
                Re: RTX2000 optimization anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-11-05 11:55 +0000
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-11-03 19:20 -0700
                Re: RTX2000 optimization mhx@iae.nl (Marcel Hendrix) - 2012-11-04 16:08 +0200
                Re: RTX2000 optimization mhx@iae.nl (Marcel Hendrix) - 2012-11-04 17:14 +0200
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-11-04 18:40 +0100
                Re: RTX2000 optimization Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-11-04 09:36 -0600
                Re: RTX2000 optimization Andy Valencia <vandys@vsta.org> - 2012-11-04 23:49 +0000
                Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-10-31 12:11 -0700
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-31 20:08 -0400
                Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-11-01 10:59 -0700
                Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-11-01 12:12 -0700
                Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-11-01 12:14 -0700
                Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-11-02 10:51 -0700
                Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-11-02 11:28 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-11-01 14:58 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-28 14:45 +0100
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-28 15:04 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-28 21:09 +0100
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-28 16:59 -0400
                Re: RTX2000 optimization albert@spenarnc.xs4all.nl (Albert van der Horst) - 2012-10-28 07:59 +0000
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-28 15:06 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 16:35 -0400
        Re: RTX2000 optimization anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-10-23 12:44 +0000
          Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-23 17:32 -0400
  Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-10-22 13:54 -0700
    Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-22 14:14 -0700
      Re: RTX2000 optimization daveyrotten <danw8804@gmail.com> - 2012-10-22 14:26 -0700
        Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-22 16:00 -0700
  Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-22 21:51 -0400
    Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-23 17:36 -0400
      Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-24 08:47 -0400
        Re: RTX2000 optimization Alex McDonald <blog@rivadpm.com> - 2012-10-24 06:36 -0700
          Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 15:33 -0400
            Re: RTX2000 optimization Alex McDonald <blog@rivadpm.com> - 2012-10-25 04:54 -0700
              Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 17:35 -0400
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-25 15:27 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 19:10 -0400
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-25 18:34 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 19:03 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-26 19:56 -0400
              Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-26 18:34 +0200
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-26 22:27 +0200
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 19:27 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 19:17 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-26 19:44 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-26 19:59 -0400
          Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-25 00:42 -0400
            Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-25 00:55 -0400
            Re: RTX2000 optimization Alex McDonald <blog@rivadpm.com> - 2012-10-25 04:49 -0700
          addressable stack, was [Re: RTX2000 optimization] "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-11-05 14:04 -0500
        Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 15:44 -0400
          Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-25 00:50 -0400
            Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 18:58 -0400
              Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-25 16:07 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 19:20 -0400
              Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-26 20:57 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-27 15:43 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-28 05:01 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-28 15:23 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-29 19:32 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-30 19:00 -0400
                Re: RTX2000 optimization "Rod Pemberton" <do_not_have@notemailnotz.cnm> - 2012-10-31 01:23 -0400
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-31 14:56 -0400
  Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-22 19:44 -0700
    Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-23 17:47 -0400
      Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-23 16:00 -0700
        Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-23 21:07 -0400
          Re: RTX2000 optimization visualforth@rocketmail.com - 2012-10-23 18:44 -0700
            Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 16:03 -0400
              Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-24 13:15 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 16:25 -0400
              Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-26 03:15 +0200
      Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-10-24 09:55 -0700
        Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-24 10:04 -0700
          Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-10-24 12:00 -0700
            Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-24 23:24 -0700
              Re: RTX2000 optimization Brad Eckert <hwfwguy@gmail.com> - 2012-10-25 09:26 -0700
                Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-25 10:39 -0700
                Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-25 19:35 -0400
                Re: RTX2000 optimization Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-26 18:26 +0200
          Re: RTX2000 optimization rickman <gnuarm@gmail.com> - 2012-10-24 16:10 -0400
            Re: RTX2000 optimization Paul Rubin <no.email@nospam.invalid> - 2012-10-24 13:21 -0700
  Re: RTX2000 optimization stephenXXX@mpeforth.com (Stephen Pelc) - 2012-10-23 10:52 +0000

csiph-web