Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.forth > #16243

Re: GA144 polyForth

From rickman <gnuarm@gmail.com>
Newsgroups comp.lang.forth
Subject Re: GA144 polyForth
Date 2012-10-13 14:28 -0400
Organization A noiseless patient Spider
Message-ID <k5cbt5$c51$1@dont-email.me> (permalink)
References (5 earlier) <6f308d76-db3d-44d1-a554-6044add07705@googlegroups.com> <k51o0u$vtc$1@dont-email.me> <a80ce7ca-bc3d-4e33-b48f-5b26339421a0@googlegroups.com> <k523oh$iae$1@dont-email.me> <ed54e260-8e5a-47d9-9b07-fda5d09c87fa@googlegroups.com>

Show all headers | View raw


On 10/13/2012 10:39 AM, Howerd wrote:
> Hi Rick,
>
>> What sample rate do you plan to use?
> I'm not intending to use the VCO as a conventional ADC, just observe the count as the voltage changes, so the sample rate will vary with voltage. Alos, mostly I want to measure timings.

I'm not sure I follow that.  How will you change your sample rate?  BTW, 
unless I don't understand the why the ADC works, every time you read the 
ADC it stops the counter for a short time.  Be aware of this as it may 
have an impact on your measurements if not accounted for.


>> I quickly read about OAM after reading your first post and I don't think
>> it is in defiance to existing theory.
> Yes, OAM is predicted by quantum mechanics, and was first observed in 1935 IIRC.
> Very much existing theory.
>
> The theory that I want to get away from is where it is assumed that an electric field can be approximated by a scalar voltage. This may require 2, 3 or 4 receiving antennas and a transmitting antenna - measuring all signals in a synchronised way.

I still don't see how the GA144 ADC is any different for this than any 
other ADC.


>> The issue with anti-aliasing is not eliminated, it is just addressed
>> in the ADC method to some extent.
> My plan is to make some measurements of timings on wires and antennas, present them on a PC using colorForth (booted from a USB stick using USBboot), then relate this to the theory... Anti-aliassing will no doubt come into this at some stage.

Anti-aliasing is used to prevent signals above the Nyquist rate (1/2 
your sample rate) from affecting your measurement of baseband signals. 
If you aren't sampling in the conventional sense, there is no need to 
anti-alias.  But then I'm not clear what you *are* doing so I can't say 
for sure.

Rick

Back to comp.lang.forth | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-09-27 14:16 -0700
  Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-09-29 01:20 -0700
    Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-09-30 11:05 -0400
      Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-09-30 09:06 -0700
        Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-09-30 14:29 -0400
          Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-09-30 19:56 -0700
    Re: GA144 polyForth Coos Haak <chforth@hccnet.nl> - 2012-09-30 21:54 +0200
    Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-01 11:18 -0700
      Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-10-01 23:40 -0700
        Re: GA144 polyForth "Elizabeth D. Rather" <erather@forth.com> - 2012-10-01 21:23 -1000
          Re: GA144 polyForth albert@spenarnc.xs4all.nl (Albert van der Horst) - 2012-10-05 19:19 +0000
        Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-04 23:04 -0700
  Re: GA144 polyForth Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-10-01 10:28 -0500
    Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-01 11:19 -0700
      Re: GA144 polyForth Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-10-03 10:46 -0500
        Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-04 13:46 -0700
  Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-05 22:10 -0700
    Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-10-05 23:17 -0700
      Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-06 05:47 -0700
        Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-07 19:31 -0400
          Re: GA144 polyForth Bernd Paysan <bernd.paysan@gmx.de> - 2012-10-08 20:10 +0200
            Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-08 16:36 -0400
          Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-08 13:31 -0700
            Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-09 13:48 -0400
              Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-09 13:21 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-09 17:08 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-13 07:39 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-13 14:28 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-13 13:37 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-13 16:54 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-13 14:14 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-13 17:30 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-14 02:00 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-14 19:54 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-15 11:03 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-15 16:38 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-16 04:12 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-16 15:46 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-16 23:05 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-17 13:40 -0400
                Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-17 22:54 -0700
            Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-18 14:53 -0400
              Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-18 15:06 -0400
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-18 15:09 -0400
              Re: GA144 polyForth Howerd <howerdo@yahoo.co.uk> - 2012-10-19 10:43 -0700
                Re: GA144 polyForth rickman <gnuarm@gmail.com> - 2012-10-19 17:43 -0400
  Re: GA144 polyForth Mikael Nordman <oh2aun@invalid.com> - 2012-10-06 11:29 +0300
    Re: GA144 polyForth mhx@iae.nl (Marcel Hendrix) - 2012-10-06 11:14 +0200
      Re: GA144 polyForth Mikael Nordman <oh2aun@invalid.com> - 2012-10-06 16:08 +0300
    Re: GA144 polyForth Paul Rubin <no.email@nospam.invalid> - 2012-10-07 10:57 -0700

csiph-web