Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #12736 > unrolled thread

where to get an upgrade for Visual objects

Started byPeter Tilsted <peter.tilsted@visma.com>
First post2019-12-30 08:13 -0800
Last post2020-01-09 10:47 -0800
Articles 16 — 5 participants

Back to article view | Back to comp.lang.clipper.visual-objects


Contents

  where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2019-12-30 08:13 -0800
    Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2019-12-30 08:43 -0800
      Re: where to get an upgrade for Visual objects Johan Nel <johan.nel@xsinet.co.za> - 2019-12-31 06:44 +0200
        Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2019-12-31 03:00 -0800
    Re: where to get an upgrade for Visual objects Frans Wauters <info@wautersit.com> - 2019-12-31 03:38 -0800
    Re: where to get an upgrade for Visual objects Frans Wauters <info@wautersit.com> - 2019-12-31 03:40 -0800
      Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2019-12-31 06:26 -0800
    Re: where to get an upgrade for Visual objects D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2020-01-08 23:19 +0100
      Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2020-01-09 00:25 -0800
        Re: where to get an upgrade for Visual objects D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2020-01-09 16:54 +0100
    where to get an upgrade for Visual objects moshe attia <attiamx@gmail.com> - 2020-01-09 00:05 -0800
      Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2020-01-09 00:16 -0800
    Re: where to get an upgrade for Visual objects Frans Wauters <info@wautersit.com> - 2020-01-09 03:37 -0800
      Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2020-01-09 05:43 -0800
        Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2020-01-09 05:52 -0800
      Re: where to get an upgrade for Visual objects Peter Tilsted <peter.tilsted@visma.com> - 2020-01-09 10:47 -0800

#12736 — where to get an upgrade for Visual objects

FromPeter Tilsted <peter.tilsted@visma.com>
Date2019-12-30 08:13 -0800
Subjectwhere to get an upgrade for Visual objects
Message-ID<a37238fc-89c3-4109-8066-360d0b3bb743@googlegroups.com>
Hi,

Long time ago i was an active member of this group, 

Since then job opportunities moved me to other areas, and the only thing still running, as far as i know, is a 15 year old CGI pro bono project for a local soccer club, created with CAV0 2, running their website.

It is their CMS and they are still using it.

I haven't touched the code in 10 years and have no development environment where CAVO is installed.

Now the hosting company running their site, is closing the server the live on
as it was a windows 2008 32 bit, which is no longer supported.

They therefore need to upgrade to 64bit

I have the code

But then what ?

where can i buy a new CAVO ?

does it still support CGI ?



Regards

Peter Tilsted
VO and Jonas rules

[toc] | [next] | [standalone]


#12737

FromPeter Tilsted <peter.tilsted@visma.com>
Date2019-12-30 08:43 -0800
Message-ID<7aabe657-1fcd-41e1-aa43-78698115d648@googlegroups.com>
In reply to#12736
mandag den 30. december 2019 kl. 17.13.48 UTC+1 skrev Peter Tilsted:
> Hi,
> 
> Long time ago i was an active member of this group, 
> 
> Since then job opportunities moved me to other areas, and the only thing still running, as far as i know, is a 15 year old CGI pro bono project for a local soccer club, created with CAV0 2, running their website.
> 
> It is their CMS and they are still using it.
> 
> I haven't touched the code in 10 years and have no development environment where CAVO is installed.
> 
> Now the hosting company running their site, is closing the server the live on
> as it was a windows 2008 32 bit, which is no longer supported.
> 
> They therefore need to upgrade to 64bit
> 
> I have the code
> 
> But then what ?
> 
> where can i buy a new CAVO ?
> 
> does it still support CGI ?
> 
> 
> 
> Regards
> 
> Peter Tilsted
> VO and Jonas rules

found the correct version of my old 'tag', and lots of old posts

Funny, i can actually remember some of the discussions

Regards

Jonas and VO-rules
Peter Højbak Tilsted
[Virtual VO-army, Danish branch]

[toc] | [prev] | [next] | [standalone]


#12739

FromJohan Nel <johan.nel@xsinet.co.za>
Date2019-12-31 06:44 +0200
Message-ID<quejmp$5b9$1@dont-email.me>
In reply to#12737
Peter,

Good to see your lurking here.  Please visit https://xsharp.info to see 
some old faces and maybe blow some new life into your VO code...

On 2019/12/30 18:43, Peter Tilsted wrote:
> mandag den 30. december 2019 kl. 17.13.48 UTC+1 skrev Peter Tilsted:
>> Hi,
>>
>> Long time ago i was an active member of this group,
>>
>> Since then job opportunities moved me to other areas, and the only thing still running, as far as i know, is a 15 year old CGI pro bono project for a local soccer club, created with CAV0 2, running their website.
>>
>> It is their CMS and they are still using it.
>>
>> I haven't touched the code in 10 years and have no development environment where CAVO is installed.
>>
>> Now the hosting company running their site, is closing the server the live on
>> as it was a windows 2008 32 bit, which is no longer supported.
>>
>> They therefore need to upgrade to 64bit
>>
>> I have the code
>>
>> But then what ?
>>
>> where can i buy a new CAVO ?
>>
>> does it still support CGI ?
>>
>>
>>
>> Regards
>>
>> Peter Tilsted
>> VO and Jonas rules
> found the correct version of my old 'tag', and lots of old posts
>
> Funny, i can actually remember some of the discussions
>
> Regards
>
> Jonas and VO-rules
> Peter Højbak Tilsted
> [Virtual VO-army, Danish branch]
-- 
*Johan Nel*
FOX member : Friend(s) of XSharp
X# Website : https://xsharp.info
George, South Africa

[toc] | [prev] | [next] | [standalone]


#12740

FromPeter Tilsted <peter.tilsted@visma.com>
Date2019-12-31 03:00 -0800
Message-ID<93c9ccb5-7d67-48e4-b8aa-e4fff0262f04@googlegroups.com>
In reply to#12739
tirsdag den 31. december 2019 kl. 05.44.12 UTC+1 skrev Johan Nel:
> Peter,
> 
> Good to see your lurking here.  Please visit https://xsharp.info to see 
> some old faces and maybe blow some new life into your VO code...
> 

i joined yesterday :-)

off course i am looking for a quick and dirty conversion of the code :-)

but if not possible, i have to start learning some new stuff

Regards

Jonas and VO-rules
Peter Højbak Tilsted
[Virtual VO-army, Danish branch]

[toc] | [prev] | [next] | [standalone]


#12741

FromFrans Wauters <info@wautersit.com>
Date2019-12-31 03:38 -0800
Message-ID<4028e3b5-a4da-4f6e-999d-2e9ab06472cd@googlegroups.com>
In reply to#12736
Hi,

There is a tool you can use after installing X#: Xporter
"C:\Program Files (x86)\XSharp\Bin\xporter.exe"

Regards,
Frans

[toc] | [prev] | [next] | [standalone]


#12742

FromFrans Wauters <info@wautersit.com>
Date2019-12-31 03:40 -0800
Message-ID<4fa99ab7-4f24-464d-9fde-45d3cfe83771@googlegroups.com>
In reply to#12736
"C:\Program Files (x86)\XSharp\VOXPorter\VOXporter.exe" for VO applications

[toc] | [prev] | [next] | [standalone]


#12743

FromPeter Tilsted <peter.tilsted@visma.com>
Date2019-12-31 06:26 -0800
Message-ID<0fb189fb-b43b-4fff-8e10-96c221a99ac1@googlegroups.com>
In reply to#12742
tirsdag den 31. december 2019 kl. 12.40.24 UTC+1 skrev Frans Wauters:
> "C:\Program Files (x86)\XSharp\VOXPorter\VOXporter.exe" for VO applications

thanks

i will give it a try in the new year

Regards

Jonas and VO-rules
Peter Højbak Tilsted
[Virtual VO-army, Danish branch]

[toc] | [prev] | [next] | [standalone]


#12758

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2020-01-08 23:19 +0100
Message-ID<g7lc1f16u5tt07kgo9j788kp3kb7rvkq16@4ax.com>
In reply to#12736
Replying on message of Mon, 30 Dec 2019 08:13:47 -0800 (PST) from
Peter Tilsted:


 Hello Peter,

>
>I have the code
>
>But then what ?
>
>where can i buy a new CAVO ?
>
>does it still support CGI ?
>

We also still use CGI on webserver. VO exe's run as well on the latest
Windows Server from ISP's but you usually have to make arrangements to
get exe rights.

I think that any VO version should be able to produce CGI exe's as
this is usually not requiring later changes.

Dick

[toc] | [prev] | [next] | [standalone]


#12761

FromPeter Tilsted <peter.tilsted@visma.com>
Date2020-01-09 00:25 -0800
Message-ID<e128417f-82aa-43ed-9dc1-51aab4def189@googlegroups.com>
In reply to#12758
onsdag den 8. januar 2020 kl. 23.19.18 UTC+1 skrev D.J.W. van Kooten:
> Replying on message of Mon, 30 Dec 2019 08:13:47 -0800 (PST) from
> Peter Tilsted:
> 
> 
>  Hello Peter,
> 

Hi Dick 

> We also still use CGI on webserver. VO exe's run as well on the latest
> Windows Server from ISP's but you usually have to make arrangements to
> get exe rights.


Thanks for this message, which gave me good hope again :-)

I have now managed to get a vo 2.8r3
I have the environment running and my code can be compiled and exe created

on my local vm running windows server 2012R2, and IIS 8.5 the cgi code is running perfectly

but when moving to the server of the hosting partner, which is Windows server 2019 and IIS 10 i get the message 'This Visual Objects application cannot be run in DOS mode'

on my local server all i changed in the IIS configuration, was setting a handler telling that .exe should use cgi/module

have you seen this error before and remember what was wrong ?

regards

Peter

[toc] | [prev] | [next] | [standalone]


#12765

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2020-01-09 16:54 +0100
Message-ID<1tie1f529u71oqesti3hevb045b85imt9h@4ax.com>
In reply to#12761
Replying on message of Thu, 9 Jan 2020 00:25:16 -0800 (PST) from Peter
Tilsted:


 Hello Peter,

>but when moving to the server of the hosting partner, which is Windows server 2019 and IIS 10 i get the message 'This Visual Objects application cannot be run in DOS mode'
>
>on my local server all i changed in the IIS configuration, was setting a handler telling that .exe should use cgi/module
>
>have you seen this error before and remember what was wrong ?
>
Actually no. Our ISP has no Windows Server 2019 but maybe that isn't
the problem.

If you look for this error you get replies that either the exe is not
transferred correctly 

https://superuser.com/questions/476808/i-am-getting-this-program-cannot-be-run-in-dos-mode-in-windows-xp

or that it somehow runs in a DOS box on that server.

Maybe this helps you?


https://stackoverflow.com/questions/32910712/dosbox-this-program-cannot-be-run-in-dos-mode-assembly

It should run normally with a URL like 
www.Mysite.com/MyExe.exe?param=something

Dick

[toc] | [prev] | [next] | [standalone]


#12759

Frommoshe attia <attiamx@gmail.com>
Date2020-01-09 00:05 -0800
Message-ID<b30ae692-2b01-4b30-a82c-ea580921fea2@googlegroups.com>
In reply to#12736
Hey . I converted from vo to php and nodejs to all the software that worked with cgi. What I can say is that life is easier to maintain and change

[toc] | [prev] | [next] | [standalone]


#12760

FromPeter Tilsted <peter.tilsted@visma.com>
Date2020-01-09 00:16 -0800
Message-ID<4dc54543-86fc-4685-8f21-0f50212d1ae8@googlegroups.com>
In reply to#12759
torsdag den 9. januar 2020 kl. 09.05.06 UTC+1 skrev moshe attia:
> Hey . I converted from vo to php and nodejs to all the software that worked with cgi. What I can say is that life is easier to maintain and change

hi moshe

yes a conversion of the code is next on my list

i think i will go to some .net 

but for now i just need to get it running in the old version :-)

[toc] | [prev] | [next] | [standalone]


#12762

FromFrans Wauters <info@wautersit.com>
Date2020-01-09 03:37 -0800
Message-ID<3ad5338f-1e29-419a-8591-34bfa7c24154@googlegroups.com>
In reply to#12736
Hi,

That message is from the basic header that every Windows (PE format) executable has. The message (and the code that displays it) is technically editable, but all compilers seem to just emit code that displays that same string and then exits. It's 16-bit executable code (like a DOS .COM file), intended to be displayed when you try to run the program on MS-DOS or similar pre-Windows systems. Windows' program loader typically skips over it.

I assume you are running 2012R2 ( in 32bit mode ) while 2019 server is 64bit only. Windows 2019 Server does not including NTVDM or any support for a 16 bit subsystem. I guess that there is some 16bit module compiled in your Visual Objects application or you start a 16bit application from your VO application. You can try to find a 32 of 64bit version to replace the 16bit modiule/program.

Regards,
Frans

[toc] | [prev] | [next] | [standalone]


#12763

FromPeter Tilsted <peter.tilsted@visma.com>
Date2020-01-09 05:43 -0800
Message-ID<495f2ad4-ac56-44d3-ab6a-07bce75678aa@googlegroups.com>
In reply to#12762
torsdag den 9. januar 2020 kl. 12.37.20 UTC+1 skrev Frans Wauters:
> Hi,
> 
> That message is from the basic header that every Windows (PE format) executable has. The message (and the code that displays it) is technically editable, but all compilers seem to just emit code that displays that same string and then exits. It's 16-bit executable code (like a DOS .COM file), intended to be displayed when you try to run the program on MS-DOS or similar pre-Windows systems. Windows' program loader typically skips over it.
> 
> I assume you are running 2012R2 ( in 32bit mode ) while 2019 server is 64bit only. Windows 2019 Server does not including NTVDM or any support for a 16 bit subsystem. I guess that there is some 16bit module compiled in your Visual Objects application or you start a 16bit application from your VO application. You can try to find a 32 of 64bit version to replace the 16bit modiule/program.
> 
> Regards,
> Frans

Hi Frans,

great info, thanks, 

I am using CAVO 2.8R3, it is 32bit, and so is my executable (i have checked :-))

The exe is not loading any other programs, but if windows 2019 is 64 bit ONLY that could still explain the message 'This Visual Objects application cannot be run in DOS mode', could it not ?

[toc] | [prev] | [next] | [standalone]


#12764

FromPeter Tilsted <peter.tilsted@visma.com>
Date2020-01-09 05:52 -0800
Message-ID<2f914b8c-c55f-4491-b4ba-89c63988d1e0@googlegroups.com>
In reply to#12763
torsdag den 9. januar 2020 kl. 14.43.47 UTC+1 skrev Peter Tilsted:
> torsdag den 9. januar 2020 kl. 12.37.20 UTC+1 skrev Frans Wauters:
> > Hi,
> > 
> > That message is from the basic header that every Windows (PE format) executable has. The message (and the code that displays it) is technically editable, but all compilers seem to just emit code that displays that same string and then exits. It's 16-bit executable code (like a DOS .COM file), intended to be displayed when you try to run the program on MS-DOS or similar pre-Windows systems. Windows' program loader typically skips over it.
> > 
> > I assume you are running 2012R2 ( in 32bit mode ) while 2019 server is 64bit only. Windows 2019 Server does not including NTVDM or any support for a 16 bit subsystem. I guess that there is some 16bit module compiled in your Visual Objects application or you start a 16bit application from your VO application. You can try to find a 32 of 64bit version to replace the 16bit modiule/program.
> > 
> > Regards,
> > Frans
> 
> Hi Frans,
> 
> great info, thanks, 
> 
> I am using CAVO 2.8R3, it is 32bit, and so is my executable (i have checked :-))
> 
> The exe is not loading any other programs, but if windows 2019 is 64 bit ONLY that could still explain the message 'This Visual Objects application cannot be run in DOS mode', could it not ?

a little followup, which leads me in the direction that it is iis 10 that is the culprit in some way:

I have full access to the wserver at the hosting company, via a remote desktop

So i opened a CMD prompt at the server
moved to the cgi-bin directory
executed the .exe file 

no problem, it returned the html that is the output if no parameters are given, og course just pinted in the cmd prompt, but nevertheless, it works from the commandline

[toc] | [prev] | [next] | [standalone]


#12767

FromPeter Tilsted <peter.tilsted@visma.com>
Date2020-01-09 10:47 -0800
Message-ID<9b7c0dc9-5310-422b-bc5d-1f59a149031e@googlegroups.com>
In reply to#12762
torsdag den 9. januar 2020 kl. 12.37.20 UTC+1 skrev Frans Wauters:
> Hi,
> 
> That message is from the basic header that every Windows (PE format) executable has. The message (and the code that displays it) is technically editable, but all compilers seem to just emit code that displays that same string and then exits. It's 16-bit executable code (like a DOS .COM file), intended to be displayed when you try to run the program on MS-DOS or similar pre-Windows systems. Windows' program loader typically skips over it.
> 
> I assume you are running 2012R2 ( in 32bit mode ) while 2019 server is 64bit only. Windows 2019 Server does not including NTVDM or any support for a 16 bit subsystem. I guess that there is some 16bit module compiled in your Visual Objects application or you start a 16bit application from your VO application. You can try to find a 32 of 64bit version to replace the 16bit modiule/program.
> 
> Regards,
> Frans

Hi again, 

it is now working !!! Yaaaayh

Although i was convinced that i did not load anything, your reply got me in the right direction

the 'cgi-bin' folder on the new server was originally a copy from the current version that is running in production.

i had then just removed all .dll + .rdd and replaced with the ones for CAVO 2.8, and replaced my .exe with the ones compiled with CAVO 2.8

there were some other stuff in the folder including to .exe files

CAINDREG.exe
UIPRECAL.exe

which indeed were old 16bit windows programs, i don't know what they are for and why they are loaded with the exe files, but when i removed those, it worked

as far as i can see they have nothing to do with VO

thanks for pointing in the right direction

regards

Peter

[toc] | [prev] | [standalone]


Back to top | Article view | comp.lang.clipper.visual-objects


csiph-web