Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.lang.clipper.visual-objects > #8582 > unrolled thread
| Started by | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| First post | 2015-10-28 17:13 -0700 |
| Last post | 2015-12-21 14:54 +0100 |
| Articles | 20 on this page of 46 — 9 participants |
Back to article view | Back to comp.lang.clipper.visual-objects
ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-10-28 17:13 -0700
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-10-29 07:40 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-10-30 14:26 -0700
Re: ReportPro 2.17b support Karl Faller <mail_withoutthat_@_drei-f_andthat_.de> - 2015-11-08 23:29 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-09 16:49 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-09 07:43 +0100
Re: ReportPro 2.17b support Robert van der Hulst <rjvanderhulst@gmail.com> - 2015-11-09 01:02 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-09 16:58 -0800
Re: ReportPro 2.17b support "Jamal Assaf" <someone@example.com> - 2015-10-29 12:44 -0400
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-01 20:26 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-10 08:30 -0600
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-10 11:21 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-11 07:53 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-11 08:28 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-11 11:10 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-12 10:39 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-12 10:41 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-12 12:43 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-13 07:04 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-13 06:21 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-14 20:11 +0100
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-18 10:14 -0800
Re: ReportPro 2.17b support nicktekhne@googlemail.com - 2015-11-18 11:00 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-18 11:35 -0800
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-11-19 07:07 +0100
Re: ReportPro 2.17b support "Wolfgang Riedmann" <wriedmann@gmail.com> - 2015-11-19 07:52 +0100
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-20 09:19 -0600
Re: ReportPro 2.17b support Fabio Romling Rotheia <pinbitmap@gmail.com> - 2015-11-20 11:06 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-20 14:03 -0600
Re: ReportPro 2.17b support Fabio Romling Rotheia <pinbitmap@gmail.com> - 2015-11-22 19:05 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-20 16:02 -0800
Re: ReportPro 2.17b support Fabio Romling Rotheia <pinbitmap@gmail.com> - 2015-11-22 19:09 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-27 16:03 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-20 15:27 -0600
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-20 13:38 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-22 04:26 -0600
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-27 13:22 -0600
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-27 14:23 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-27 17:42 -0800
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-11-30 10:24 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-11-30 15:41 -0600
Re: ReportPro 2.17b support "Pedro M. Espinosa" <pmespinosa@gmail.com> - 2015-12-01 07:53 -0800
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-12-01 14:44 -0600
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-12-21 07:53 +0100
Re: ReportPro 2.17b support "Willie Moore" <williem@wmconsulting.com> - 2015-12-21 03:27 -0600
Re: ReportPro 2.17b support Franz Rachbauer <office@rachbauer.org> - 2015-12-21 14:54 +0100
Page 2 of 3 — ← Prev page 1 [2] 3 Next page →
| From | Franz Rachbauer <office@rachbauer.org> |
|---|---|
| Date | 2015-11-14 20:11 +0100 |
| Message-ID | <n2810h$8v2$1@speranza.aioe.org> |
| In reply to | #8667 |
Hi Pedro, check your gmail.com box! Regards, Franz Am 13.11.2015 um 15:21 schrieb Pedro M. Espinosa: > I sent it again to the new address, I hope you'll get it this time > > > On Friday, November 13, 2015 at 12:04:20 AM UTC-6, Franz Rachbauer wrote: >> Hi Pedro, >> nothing arrived till now, maybe it didn't pass a spam filter anywhere. I >> give you an alternate email: >> r.lagander(at)gmx.net >> >> Regards >> >> Am 12.11.2015 um 21:43 schrieb Pedro M. Espinosa: >>> On Thursday, November 12, 2015 at 12:41:09 PM UTC-6, Pedro M. Espinosa wrote: >>>> No, I sent it as a reply to your id in the newsgroup, but I'll resend it shortly >>>> Pedro >>> >>> I already sent it to office @ rachbauer.org >>> >
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-18 10:14 -0800 |
| Message-ID | <ba89430b-9847-4a09-970e-ce95f586467d@googlegroups.com> |
| In reply to | #8634 |
Willie:
After a lot of struggle during the past week, with the enormous help of Franz Rachbauer, and negotiations with my client to suppress part of the information, I've got the report running.
Nevertheless I think these problems have to be corrected really soon:
a) The division by a variable sends a message "THERE IS AN ERROR IN THE EXPRESSION!
x being a float number
x/10 -> The expression is OK
10/x -> THERE IS AN ERROR IN THE EXPRESSION!
This shouldn't happen!! and there is no workarround to this problem as in my case this is a percentage of the difference between two fields!!
b) If you make any change in the Field Style dialog (i.e. expression, picture or alignment and try to preview the results of your change you'll get the message "AN UNDETERMINABLE ERROR WAS ENCOUNTERED WHILE MOVING TO THE FIRST LOGICAL RECORD".
The workarround is to save the RPT file, close it and open it again, but this makes the process really cumbersome.
c) The methods
<oRpReport>:SetVarInitExpression(cName, xExpression)
<oRpReport>:SetVarUpdateExpression(cName, xExpression)
State that:
xExpression: This parameter can either be a string representing the expression to be macro compiled or a codeblock.
but being MyDateField a date variable within ReportPro
if I code
oRpReport:SetVarInitExpression(MyDateField, DtoC(MyDate))
oRpReport:SetVarUpdateExpression(MyDateField, DtoC(MyDate))
the report ignores the new value, i.e. it keeps the value I hardcoded in the RPT file
Again the workarround is to avoid the use of these two methods, and use the
SetVariableValue() Method, but then what is the purpose of the first two methods?
I hope you can look into these problems and solve them.
Thanks in advance,
Pedro
P.S. As I told you before I'm using the most current versions of both products (VO 2.8SP4b -2838- and ReportPro 2.17b) which I bought form Grafx just a month ago)
On Tuesday, November 10, 2015 at 8:30:58 AM UTC-6, Willie Moore wrote:
> Pedro,
>
> I can confirm the issue with the VO version of RP 2.17. The Vulcan version
> is unaffected. It will be next week before I can look at the error in VO.
> What version of VO are you working on? I tested against VO 2.8sp4b.
>
> Regards,
> Willie
> Grafx Development Team
>
> "Pedro M. Espinosa" wrote in message
> news:77bd3bc0-a0bf-4e70-b289-3b3670ba6bbb@googlegroups.com...
>
> Hi,
> I'm having problems with a report when I add a picture to a numeric field in
> the Field Style dialog.
> It works fine if I just add the field with no picture, but as soon as I add
> a picture I get a Report Error! error box that says An undeterminable error
> was encountered while moving to the first logical record.
> The picture I'm using is 99,999,999.99
> TIA for your help
[toc] | [prev] | [next] | [standalone]
| From | nicktekhne@googlemail.com |
|---|---|
| Date | 2015-11-18 11:00 -0800 |
| Message-ID | <d557a557-af06-40a8-9d43-dd46ce27126e@googlegroups.com> |
| In reply to | #8680 |
On Wednesday, November 18, 2015 at 6:14:33 PM UTC, Pedro M. Espinosa wrote: > a) The division by a variable sends a message "THERE IS AN ERROR IN THE EXPRESSION! > x being a float number > x/10 -> The expression is OK > 10/x -> THERE IS AN ERROR IN THE EXPRESSION! > This shouldn't happen!! and there is no workarround to this problem as in my case this is a percentage of the difference between two fields!! Pedro, I think there is a horrible workaround for this problem of dividing by a variable... 10 / (x + 0.000000000001) If you do something like that it forces ReportPro to evaluate the variable as numeric and the error goes away. Of course it depends how accurate you need to be! HTH Nick
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-18 11:35 -0800 |
| Message-ID | <74fac18a-9567-4774-911d-14520efde739@googlegroups.com> |
| In reply to | #8681 |
On Wednesday, November 18, 2015 at 1:00:37 PM UTC-6, nickt...@googlemail.com wrote: > On Wednesday, November 18, 2015 at 6:14:33 PM UTC, Pedro M. Espinosa wrote: > > a) The division by a variable sends a message "THERE IS AN ERROR IN THE EXPRESSION! > > x being a float number > > x/10 -> The expression is OK > > 10/x -> THERE IS AN ERROR IN THE EXPRESSION! > > This shouldn't happen!! and there is no workarround to this problem as in my case this is a percentage of the difference between two fields!! > > Pedro, Nick: Thanks a lot! Not that horrible workaround, as it was good enough for my report. Pedro > > I think there is a horrible workaround for this problem of dividing by a variable... 10 / (x + 0.000000000001) > > If you do something like that it forces ReportPro to evaluate the variable as numeric and the error goes away. Of course it depends how accurate you need to be! > > HTH > > Nick
[toc] | [prev] | [next] | [standalone]
| From | Franz Rachbauer <office@rachbauer.org> |
|---|---|
| Date | 2015-11-19 07:07 +0100 |
| Message-ID | <n2jouo$tmm$1@speranza.aioe.org> |
| In reply to | #8680 |
Willie again: If you make bug fixes in RP 2.17b, please use the versions of Wolfgang Riedmann, who already made some fixes in the area of sql. Regards, Franz --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus
[toc] | [prev] | [next] | [standalone]
| From | "Wolfgang Riedmann" <wriedmann@gmail.com> |
|---|---|
| Date | 2015-11-19 07:52 +0100 |
| Message-ID | <db59spF97grU1@mid.individual.net> |
| In reply to | #8683 |
Hi Franz, > If you make bug fixes in RP 2.17b, please use the versions of > Wolfgang Riedmann, who already made some fixes in the area of sql. I have passed these fixes to Willie who has integrated them in the various versions of ReportPro (it is not an easy work for him as there are 4 different to maintain: 2.x for VO and VN, 3.x for VO and VN). Wolfgang --
[toc] | [prev] | [next] | [standalone]
| From | "Willie Moore" <williem@wmconsulting.com> |
|---|---|
| Date | 2015-11-20 09:19 -0600 |
| Message-ID | <n2ndm2$89a$1@speranza.aioe.org> |
| In reply to | #8680 |
Pedro,
I will look at your concerns with the VO version of RP2 after I finish
working on a Vulcan issue unrelated to the RP issue. The reports work
properly in the Vulcan version of RP2. I have the code from Wolfgang
incorporated in the d or e version of rp2.
Regards,
Willie
Grafx Development Team
"Pedro M. Espinosa" wrote in message
news:ba89430b-9847-4a09-970e-ce95f586467d@googlegroups.com...
Willie:
After a lot of struggle during the past week, with the enormous help of
Franz Rachbauer, and negotiations with my client to suppress part of the
information, I've got the report running.
Nevertheless I think these problems have to be corrected really soon:
a) The division by a variable sends a message "THERE IS AN ERROR IN THE
EXPRESSION!
x being a float number
x/10 -> The expression is OK
10/x -> THERE IS AN ERROR IN THE EXPRESSION!
This shouldn't happen!! and there is no workarround to this problem as in my
case this is a percentage of the difference between two fields!!
b) If you make any change in the Field Style dialog (i.e. expression,
picture or alignment and try to preview the results of your change you'll
get the message "AN UNDETERMINABLE ERROR WAS ENCOUNTERED WHILE MOVING TO THE
FIRST LOGICAL RECORD".
The workarround is to save the RPT file, close it and open it again, but
this makes the process really cumbersome.
c) The methods
<oRpReport>:SetVarInitExpression(cName, xExpression)
<oRpReport>:SetVarUpdateExpression(cName, xExpression)
State that:
xExpression: This parameter can either be a string representing the
expression to be macro compiled or a codeblock.
but being MyDateField a date variable within ReportPro
if I code
oRpReport:SetVarInitExpression(MyDateField, DtoC(MyDate))
oRpReport:SetVarUpdateExpression(MyDateField, DtoC(MyDate))
the report ignores the new value, i.e. it keeps the value I hardcoded in the
RPT file
Again the workarround is to avoid the use of these two methods, and use the
SetVariableValue() Method, but then what is the purpose of the first two
methods?
I hope you can look into these problems and solve them.
Thanks in advance,
Pedro
P.S. As I told you before I'm using the most current versions of both
products (VO 2.8SP4b -2838- and ReportPro 2.17b) which I bought form Grafx
just a month ago)
[toc] | [prev] | [next] | [standalone]
| From | Fabio Romling Rotheia <pinbitmap@gmail.com> |
|---|---|
| Date | 2015-11-20 11:06 -0800 |
| Message-ID | <0e5afaee-94b2-457c-9305-49935e2968fe@googlegroups.com> |
| In reply to | #8688 |
Willie, Please also take a look at the close button (and the menu close option) of the designer preview Window in the same version of ReportPro that Pedro is using. It's not working. Thanks in advance, Fábio
[toc] | [prev] | [next] | [standalone]
| From | "Willie Moore" <williem@wmconsulting.com> |
|---|---|
| Date | 2015-11-20 14:03 -0600 |
| Message-ID | <n2nuat$gfv$1@speranza.aioe.org> |
| In reply to | #8689 |
Fábio, What are you seeing when you hit the close button on the form designer? On my machine the window closes. Same thing with the menu option to close. Regards, Willie Grafx Development Team "Fabio Romling Rotheia" wrote in message news:0e5afaee-94b2-457c-9305-49935e2968fe@googlegroups.com... Willie, Please also take a look at the close button (and the menu close option) of the designer preview Window in the same version of ReportPro that Pedro is using. It's not working. Thanks in advance, Fábio
[toc] | [prev] | [next] | [standalone]
| From | Fabio Romling Rotheia <pinbitmap@gmail.com> |
|---|---|
| Date | 2015-11-22 19:05 -0800 |
| Message-ID | <eb9bc272-e187-494f-9663-755940dbc48a@googlegroups.com> |
| In reply to | #8690 |
Hello Willie, It's not in the form designer, it's on the preview window of the form designer, when you preview one report being created or modified. Since I translated the menu to Brazillian Portuguese on the module Rp2Eng32, maybe the problem has something to do with that. I'll do some more tests. Thank you very much! Fábio. Em sexta-feira, 20 de novembro de 2015 18:03:46 UTC-2, Willie Moore escreveu: > Fábio, > > What are you seeing when you hit the close button on the form designer? On > my machine the window closes. Same thing with the menu option to close. > > Regards, > Willie > Grafx Development Team > > "Fabio Romling Rotheia" wrote in message > > Willie, > > Please also take a look at the close button (and the menu close option) of > the designer preview Window in the same version of ReportPro that Pedro is > using. It's not working. > > Thanks in advance, > > Fábio
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-20 16:02 -0800 |
| Message-ID | <ee818e54-271a-4cad-9356-b4463e9f2024@googlegroups.com> |
| In reply to | #8689 |
On Friday, November 20, 2015 at 1:06:28 PM UTC-6, Fabio Romling Rotheia wrote: > Willie, > > Please also take a look at the close button (and the menu close option) of the designer preview Window in the same version of ReportPro that Pedro is using. It's not working. > > Thanks in advance, > > Fábio Fabio,what Windows version are you using? I´m using Win 10 and have no problems with that. Regards Pedro
[toc] | [prev] | [next] | [standalone]
| From | Fabio Romling Rotheia <pinbitmap@gmail.com> |
|---|---|
| Date | 2015-11-22 19:09 -0800 |
| Message-ID | <d93f9f4d-9582-45c4-9bc2-d4577f4dfc58@googlegroups.com> |
| In reply to | #8694 |
Hello Pedro, I'm using Windows 10, Brazillian edition. Maybe the problem is that i'm not using an english version. But again, maybe not... Regards, Fábio. Em sexta-feira, 20 de novembro de 2015 22:02:07 UTC-2, Pedro M. Espinosa escreveu: > On Friday, November 20, 2015 at 1:06:28 PM UTC-6, Fabio Romling Rotheia wrote: > > Willie, > > > > Please also take a look at the close button (and the menu close option) of the designer preview Window in the same version of ReportPro that Pedro is using. It's not working. > > > > Thanks in advance, > > > > Fábio > > Fabio,what Windows version are you using? I´m using Win 10 and have no problems with that. > Regards > Pedro
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-27 16:03 -0800 |
| Message-ID | <06b50150-ecd4-4e43-a729-a1f03883686c@googlegroups.com> |
| In reply to | #8699 |
On Sunday, November 22, 2015 at 9:09:11 PM UTC-6, Fabio Romling Rotheia wrote: > Hello Pedro, > > I'm using Windows 10, Brazillian edition. Maybe the problem is that i'm not using an english version. But again, maybe not... > > Regards, > Fábio. > > Em sexta-feira, 20 de novembro de 2015 22:02:07 UTC-2, Pedro M. Espinosa escreveu: > > On Friday, November 20, 2015 at 1:06:28 PM UTC-6, Fabio Romling Rotheia wrote: > > > Willie, > > > > > > Please also take a look at the close button (and the menu close option) of the designer preview Window in the same version of ReportPro that Pedro is using. It's not working. > > > > > > Thanks in advance, > > > > > > Fábio > > > > Fabio,what Windows version are you using? I´m using Win 10 and have no problems with that. > > Regards > > Pedro I'm not using the english version either (Latin American Spanish), I wouldn't think that's the problem.
[toc] | [prev] | [next] | [standalone]
| From | "Willie Moore" <williem@wmconsulting.com> |
|---|---|
| Date | 2015-11-20 15:27 -0600 |
| Message-ID | <n2o38f$rpa$1@speranza.aioe.org> |
| In reply to | #8680 |
Pedro, Please send me a private email so I can sent you a current version over the weekend as I am working on your issue. Regards, Willie Grafx Development Team
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-20 13:38 -0800 |
| Message-ID | <092157ae-64e6-46e8-90a3-3771caa09a03@googlegroups.com> |
| In reply to | #8691 |
On Friday, November 20, 2015 at 3:27:47 PM UTC-6, Willie Moore wrote: > Pedro, > > Please send me a private email so I can sent you a current version over the > weekend as I am working on your issue. > > Regards, > Willie > Grafx Development Team Hi Willie I already sent you a private email, could you confirm you received it? Pedro
[toc] | [prev] | [next] | [standalone]
| From | "Willie Moore" <williem@wmconsulting.com> |
|---|---|
| Date | 2015-11-22 04:26 -0600 |
| Message-ID | <n2s583$qij$1@speranza.aioe.org> |
| In reply to | #8692 |
Pedro, I did get your email. I also went back to RP 213 for VO 2.7. This issue existed in that version too. I am trying to do a stare and compare with the Vulcan version as it is working in the Vulcan version of RP2. Regards, Willie Grafx Development Team
[toc] | [prev] | [next] | [standalone]
| From | "Willie Moore" <williem@wmconsulting.com> |
|---|---|
| Date | 2015-11-27 13:22 -0600 |
| Message-ID | <n3aah0$tjc$1@speranza.aioe.org> |
| In reply to | #8692 |
Pedro, I sent you a link to the new beta version. Please let me know if it fixed your issues. This will be RP 2.17i Regards, Willie Grafx Development Team
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-27 14:23 -0800 |
| Message-ID | <9272978b-cc85-47af-a49c-697fb52f03be@googlegroups.com> |
| In reply to | #8740 |
On Friday, November 27, 2015 at 1:22:12 PM UTC-6, Willie Moore wrote: > Pedro, > > I sent you a link to the new beta version. Please let me know if it fixed > your issues. This will be RP 2.17i > > Regards, > Willie > Grafx Development Team As soon as I get back to the office I'll do it Thanks Pedro
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-27 17:42 -0800 |
| Message-ID | <cd45fa50-16b1-416b-a43b-2bb9ca4c4396@googlegroups.com> |
| In reply to | #8740 |
On Friday, November 27, 2015 at 1:22:12 PM UTC-6, Willie Moore wrote: > Pedro, > > I sent you a link to the new beta version. Please let me know if it fixed > your issues. This will be RP 2.17i > > Regards, > Willie > Grafx Development Team I can confirm that problems a) and b) in the designer are allready solved. I will test the c) issue next monday and let you know
[toc] | [prev] | [next] | [standalone]
| From | "Pedro M. Espinosa" <pmespinosa@gmail.com> |
|---|---|
| Date | 2015-11-30 10:24 -0800 |
| Message-ID | <bd703635-58dd-42e6-87fb-9c7d21b72c9e@googlegroups.com> |
| In reply to | #8740 |
On Friday, November 27, 2015 at 1:22:12 PM UTC-6, Willie Moore wrote:
> Pedro,
>
> I sent you a link to the new beta version. Please let me know if it fixed
> your issues. This will be RP 2.17i
>
> Regards,
> Willie
> Grafx Development Team
Willie:
The c) Issue remains unresolved but the behavior changed, instead of ignoring the new value now it sends the message "AN UNDETERMINABLE ERROR WAS ENCOUNTERED WHILE MOVING TO THE FIRST LOGICAL RECORD".
Just to remind you the c) issue is:
c) The methods
<oRpReport>:SetVarInitExpression(cName, xExpression)
<oRpReport>:SetVarUpdateExpression(cName, xExpression)
State that:
xExpression: This parameter can either be a string representing the expression to be macro compiled or a codeblock.
but being MyDateField a date variable within ReportPro
if I code
oRpReport:SetVarInitExpression(MyDateField, DtoC(MyDate))
oRpReport:SetVarUpdateExpression(MyDateField, DtoC(MyDate))
it used to ignore the new value, and now sends the above mentioned message.
I replaced all the AEF's that came in the new version and recompiled.
A new problem appeared "Class DIBMP multiple defined in app/lib RP2DSN32 lib and RP2SQL32 lib" that are used in the app Rp2Sql32 Test. This problem is not urgent for me as I'm not using SQL now.
Best regards
Pedro
[toc] | [prev] | [next] | [standalone]
Page 2 of 3 — ← Prev page 1 [2] 3 Next page →
Back to top | Article view | comp.lang.clipper.visual-objects
csiph-web