Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #8896 > unrolled thread

CAVO2.5b-3 Subsystem is not available

Started byAitor <aitortilla007007@gmail.com>
First post2016-01-21 01:23 -0800
Last post2016-01-22 07:40 +0100
Articles 7 — 5 participants

Back to article view | Back to comp.lang.clipper.visual-objects


Contents

  CAVO2.5b-3 Subsystem is not available Aitor <aitortilla007007@gmail.com> - 2016-01-21 01:23 -0800
    Re: CAVO2.5b-3 Subsystem is not available D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-01-21 14:39 +0100
      Re: CAVO2.5b-3 Subsystem is not available aitortilla007007@gmail.com - 2016-01-21 09:01 -0800
        Re: CAVO2.5b-3 Subsystem is not available D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-01-22 12:24 +0100
          Re: CAVO2.5b-3 Subsystem is not available D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-01-25 13:55 +0100
    Re: CAVO2.5b-3 Subsystem is not available Sherlock <sherlock@sherlock.com.au> - 2016-01-21 09:50 -0800
    Re: CAVO2.5b-3 Subsystem is not available "Wolfgang Riedmann" <wriedmann@gmail.com> - 2016-01-22 07:40 +0100

#8896 — CAVO2.5b-3 Subsystem is not available

FromAitor <aitortilla007007@gmail.com>
Date2016-01-21 01:23 -0800
SubjectCAVO2.5b-3 Subsystem is not available
Message-ID<e9d9047f-0ae4-4a02-9f5c-78d8b2ff32ba@googlegroups.com>
Hi! We have a problem with CAVO2.5b -3. We have been working over 15 years without problems. Since the last 2-3 years we have been working properly on a Windows 7 32 bit until a few days ago an update of Microsoft office and operating system was performed.

Since then we have to run CAVO25 compatibility with Windows XP SP 3 and the error 'Subsystem is not available' pops when we want to edit a screen. Also under Tools we can't access some options we had enabled previously.

The code is displayed correctly, you can make changes and compile.

We still support this for Legacy applications we dont have plans to migrate to another platform.

Any ideas?

Thank you!

[toc] | [next] | [standalone]


#8897

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2016-01-21 14:39 +0100
Message-ID<hrn1ablopksr4maesgrucinp4784h6um07@4ax.com>
In reply to#8896
On Thu, 21 Jan 2016 01:23:31 -0800 (PST), Aitor
<aitortilla007007@gmail.com> wrote:

Hello Aitor,

>Since then we have to run CAVO25 compatibility with Windows XP SP 3 and the error 'Subsystem is not available' pops when we want to edit a screen.


I found this problem in this NG in a posting of 22-12-2000 and
further, this is reply:

If you mean the VO-IDE menu then these things sometimes
happen after installation of a third party product. Find the registry
key
HKEY_CURRENT_USER\Software\Computer Associates\CA Visual Objects
2.5\Tools
and check for missing string values - CAVOWED.DLL, CAVOIED.DLL,
CAVODED.DLL,CAVOFED.DLL,CAVEMED.DLL,CAVSED.DLL

and


At a guess you unistalled and reinstalled VO and installed an extra
subsystem before
you started VO for the first time. It seems to only add the subsystems
when it is launched and there are no subsystems.
use regedit (or similar)
and very carefully go to:
HKEY_CURRENT_USER\Software\ComputerAssociates\CA-Visual Objects
2.5\Tools
and check for the following keys and values
"CAVODED.DLL"=""
"CAVOFED.DLL"=""
"CAVOIED.DLL"=""
"CAVOMED.DLL"=""
"CAVOSED.DLL"=""
"CAVOWED.DLL"=""
"CAVOJED.DLL"=""

if cavowed is not present then binary window entities cannot be
edited.

Success!

Dick

[toc] | [prev] | [next] | [standalone]


#8898

Fromaitortilla007007@gmail.com
Date2016-01-21 09:01 -0800
Message-ID<ce69f4c0-6fc2-48bd-abb5-0c2cd5f751ae@googlegroups.com>
In reply to#8897
Thanks for you quick response :)

Unfortunately we tried the following...

> use regedit (or similar)
> and very carefully go to:
> HKEY_CURRENT_USER\Software\ComputerAssociates\CA-Visual Objects
> 2.5\Tools
> and check for the following keys and values
> "CAVODED.DLL"=""
> "CAVOFED.DLL"=""
> "CAVOIED.DLL"=""
> "CAVOMED.DLL"=""
> "CAVOSED.DLL"=""
> "CAVOWED.DLL"=""
> "CAVOJED.DLL"=""
> 
> if cavowed is not present then binary window entities cannot be
> edited.

but the registry looks like you stated. :(

We have been googling the past 2 days and didn't find any other solution.

Any other ideas? We are checking if registry permissions have been modified and make sure is not the source of the problem.

Thanks!

[toc] | [prev] | [next] | [standalone]


#8903

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2016-01-22 12:24 +0100
Message-ID<29v3ab5gssv9psu4en7h8l9gf8q49ap4d3@4ax.com>
In reply to#8898
On Thu, 21 Jan 2016 09:01:06 -0800 (PST), aitortilla007007@gmail.com
wrote:

>Thanks for you quick response :)
>
>Unfortunately we tried the following...
>
>> use regedit (or similar)
>> and very carefully go to:
>> HKEY_CURRENT_USER\Software\ComputerAssociates\CA-Visual Objects
>> 2.5\Tools
>> and check for the following keys and values
>> "CAVODED.DLL"=""
>> "CAVOFED.DLL"=""
>> "CAVOIED.DLL"=""
>> "CAVOMED.DLL"=""
>> "CAVOSED.DLL"=""
>> "CAVOWED.DLL"=""
>> "CAVOJED.DLL"=""
>> 
>> if cavowed is not present then binary window entities cannot be
>> edited.
>
>but the registry looks like you stated. :(
>
Hello Aitor,

Other replies about this subject also included re-installing VO. But I
agree with Phil and Wolfgang. Buy yourself VO 2.8. It is already worth
the price for the improvements in the editor and Intellisense, even if
you use VO. I personally find the editor better than any Visual Studio
version.

Dick

[toc] | [prev] | [next] | [standalone]


#8906

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2016-01-25 13:55 +0100
Message-ID<bo6cab9tg641a71fs2h51ikfn3eu8ddj6q@4ax.com>
In reply to#8903
On Fri, 22 Jan 2016 12:24:29 +0100, D.J.W. van Kooten
<vankooten@removethis.ic2.com> wrote:

>It is already worth
>the price for the improvements in the editor and Intellisense, even if
>you use VO. 

...should read: even if you use VO only briefly...

Dick

[toc] | [prev] | [next] | [standalone]


#8899

FromSherlock <sherlock@sherlock.com.au>
Date2016-01-21 09:50 -0800
Message-ID<26808d67-e174-480b-8ad2-ffbd80c8f21d@googlegroups.com>
In reply to#8896
snip[ Vo2.5 b3 and XP  ]

All obsolete and time to update everything.
Living in the past..

At least Windows 10 and VO2.8 which is such a better product than Vo2.5

How long before you move on to supported products?

Phil

[toc] | [prev] | [next] | [standalone]


#8900

From"Wolfgang Riedmann" <wriedmann@gmail.com>
Date2016-01-22 07:40 +0100
Message-ID<dge16eFp9h3U1@mid.individual.net>
In reply to#8896
Hi Aitor,

VO 2.5 is a very old product and not supported anymore on modern
Windows platforms. It will be very hard to find solutions and help for
such an old product.

It may be better to buy an upgrade to the latest VO version and move
your supported products on this platform. Otherwise you risk to spend a
lot of time without a solution, and maybe you are able to make it work
now, but another Windows update or system change can stop your work
again.

Wolfgang


Aitor wrote:

> Hi! We have a problem with CAVO2.5b -3. We have been working over 15
> years without problems. Since the last 2-3 years we have been working
> properly on a Windows 7 32 bit until a few days ago an update of
> Microsoft office and operating system was performed.
> 
> Since then we have to run CAVO25 compatibility with Windows XP SP 3
> and the error 'Subsystem is not available' pops when we want to edit
> a screen. Also under Tools we can't access some options we had
> enabled previously.
> 
> The code is displayed correctly, you can make changes and compile.
> 
> We still support this for Legacy applications we dont have plans to
> migrate to another platform.
> 
> Any ideas?
> 
> Thank you!



-- 

[toc] | [prev] | [standalone]


Back to top | Article view | comp.lang.clipper.visual-objects


csiph-web