Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #7925 > unrolled thread

Reboot

Started byRob Smith <rasmithhalifax@gmail.com>
First post2015-04-05 09:34 -0700
Last post2015-04-16 15:21 +0200
Articles 5 — 4 participants

Back to article view | Back to comp.lang.clipper.visual-objects


Contents

  Reboot Rob Smith <rasmithhalifax@gmail.com> - 2015-04-05 09:34 -0700
    Re: Reboot "Urs Eggmann" <Urs.Eggmann@shinternet.ch> - 2015-04-05 22:43 +0200
    Re: Reboot D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2015-04-07 11:59 +0200
      Re: Reboot "Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl> - 2015-04-16 15:20 +0200
    Re: Reboot "Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl> - 2015-04-16 15:21 +0200

#7925 — Reboot

FromRob Smith <rasmithhalifax@gmail.com>
Date2015-04-05 09:34 -0700
SubjectReboot
Message-ID<b85f4177-9ba4-4be8-b45d-71a2037356b1@googlegroups.com>
Hi

For the past week, once I have compiled and tested then go to make changes when I try to generate the exe I get a message saying either the program is in use of the .DBG is in use.

I haven't changed any properties in the application.

This only happens to 1 of 3 applications and I am at a lose to find the cause, task manager doesn't show the program running but if I try to delete it, it tells me it is in use. 

The only way I can proceed is to re-boot!

Any suggestions much appreciated.

Thanks

Robert

[toc] | [next] | [standalone]


#7926

From"Urs Eggmann" <Urs.Eggmann@shinternet.ch>
Date2015-04-05 22:43 +0200
Message-ID<codl52FhkvqU1@mid.individual.net>
In reply to#7925
Hi Robert,

May be you did not close the app, only the window?
That often occurs if you open only a datawindow in the start method. Inset 
at the End of the oWin:Close() Method the line

GetAppObject():QUIT()

regards
Urs

"Rob Smith" <rasmithhalifax@gmail.com> schrieb im Newsbeitrag 
news:b85f4177-9ba4-4be8-b45d-71a2037356b1@googlegroups.com...
> Hi
>
> For the past week, once I have compiled and tested then go to make changes 
> when I try to generate the exe I get a message saying either the program 
> is in use of the .DBG is in use.
>
> I haven't changed any properties in the application.
>
> This only happens to 1 of 3 applications and I am at a lose to find the 
> cause, task manager doesn't show the program running but if I try to 
> delete it, it tells me it is in use.
>
> The only way I can proceed is to re-boot!
>
> Any suggestions much appreciated.
>
> Thanks
>
> Robert
> 

[toc] | [prev] | [next] | [standalone]


#7936

FromD.J.W. van Kooten <vankooten@removethis.ic2.com>
Date2015-04-07 11:59 +0200
Message-ID<aja7iad53sug2kd9r29o3otvm8iqliuena@4ax.com>
In reply to#7925
On Sun, 5 Apr 2015 09:34:55 -0700 (PDT), Rob Smith
<rasmithhalifax@gmail.com> wrote:

Hello Robert,
>
>For the past week, once I have compiled and tested then go to make changes when 
>I try to generate the exe I get a message saying either the program is in use of the .DBG is in use.


Apart from the suggestion from Urs, this is what was discussed a few
years ago. As I had a problem with a DBG too the first suggestions
were mine. My problem was that the .dbf  wasn't updated, meaning that
we didn't see program changes. It didn't say that it was in use but
your and my problem seem related. I hope this or Urs' suggestion helps
you.


- Rename that project and import one or more old AEF's to see if the
problem still persists. 
- Create a new project, importing the project files and see if it
works from there
- Or even a whole new Cavo installation

I assume you have manually deleted the previous DBG file?

=====

If so then a path has been corrupted in the cfg somewhere. Import and 
sample app and try again. If not, check all CAVO settings.

=====

- a couple of the Resource definitions - different resource names
linked to the same bmp file- a resource definition that was linked to
the wrong bit map



Dick

[toc] | [prev] | [next] | [standalone]


#7956

From"Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl>
Date2015-04-16 15:20 +0200
Message-ID<kGOXw.37532$PK7.9764@fe13.am1>
In reply to#7936
Hey,

I have seen that too. I created a batch file in my taskbar that deletes the 
.DBG and .VOM file...
I am now used to click it every once in a while... Did not experience this 
in VO build 2836.

I also have seen that sometimes my app fail to compile: Cannot create .DBG 
and/or Cannot find Windows Resource Compiler...
This is what I do.
1 Hit the 'Delete DBG and VOM' files button on my taskbar
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after 
a reindex
4 Start VO and try to build the app and debug .DBG or .EXE

If that fails
1 Hit the 'Delete DBG and VOM' files button on my taskbar
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after 
a reindex
4 Start VOPP Systembuilder
5 Recompile all files (Force Touch before build and create .EXE)

If that fails
1 Restart my machine
2 Try both solutions again...

If that fails....
1 Go home, have a beer, sleep and go to the office again.
2 Restart my machine and try solution 1 and 2 again

If that fails
1 Create a new repo from Source Safe
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after 
a reindex
4 Then it always works...

I installed VO2838 in May 2014.
With build 2836 I had not rebuild my repo since 15-06-2010... So almost 4 
years without a new repo and I used VO nearly every day but....
1 I did not use drag and drop in VO
2 No exotic renames nor changing classnames
3 Not trying to do 'strange stuff'
4 Restart VO every once in a while

I experience a lot more instability in VO2838 than I had in VO 2836 but not 
on a level that it is unworkable....

Regards, Marc

"D.J.W. van Kooten"  schreef in bericht 
news:aja7iad53sug2kd9r29o3otvm8iqliuena@4ax.com...

On Sun, 5 Apr 2015 09:34:55 -0700 (PDT), Rob Smith
<rasmithhalifax@gmail.com> wrote:

Hello Robert,
>
>For the past week, once I have compiled and tested then go to make changes 
>when
>I try to generate the exe I get a message saying either the program is in 
>use of the .DBG is in use.


Apart from the suggestion from Urs, this is what was discussed a few
years ago. As I had a problem with a DBG too the first suggestions
were mine. My problem was that the .dbf  wasn't updated, meaning that
we didn't see program changes. It didn't say that it was in use but
your and my problem seem related. I hope this or Urs' suggestion helps
you.


- Rename that project and import one or more old AEF's to see if the
problem still persists.
- Create a new project, importing the project files and see if it
works from there
- Or even a whole new Cavo installation

I assume you have manually deleted the previous DBG file?

=====

If so then a path has been corrupted in the cfg somewhere. Import and
sample app and try again. If not, check all CAVO settings.

=====

- a couple of the Resource definitions - different resource names
linked to the same bmp file- a resource definition that was linked to
the wrong bit map



Dick 

[toc] | [prev] | [next] | [standalone]


#7957

From"Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl>
Date2015-04-16 15:21 +0200
Message-ID<hHOXw.27749$193.2422@fe35.am1>
In reply to#7925
Hey,

I have seen that too. I created a batch file in my taskbar that deletes the
.DBG and .VOM file...
I am now used to click it every once in a while... Did not experience this
in VO build 2836.

I also have seen that sometimes my app fail to compile: Cannot create .DBG
and/or Cannot find Windows Resource Compiler...
This is what I do.
1 Hit the 'Delete DBG and VOM' files button on my taskbar
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after
a reindex
4 Start VO and try to build the app and debug .DBG or .EXE

If that fails
1 Hit the 'Delete DBG and VOM' files button on my taskbar
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after
a reindex
4 Start VOPP Systembuilder
5 Recompile all files (Force Touch before build and create .EXE)

If that fails
1 Restart my machine
2 Try both solutions again...

If that fails....
1 Go home, have a beer, sleep and go to the office again.
2 Restart my machine and try solution 1 and 2 again

If that fails
1 Create a new repo from Source Safe
2 Reindex the project
3 Quit VO and start again since no DBG or EXE can be created directly after
a reindex
4 Then it always works...

I installed VO2838 in May 2014.
With build 2836 I had not rebuild my repo since 15-06-2010... So almost 4
years without a new repo and I used VO nearly every day but....
1 I did not use drag and drop in VO
2 No exotic renames nor changing classnames
3 Not trying to do 'strange stuff'
4 Restart VO every once in a while

I experience a lot more instability in VO2838 than I had in VO 2836 but not
on a level that it is unworkable....

Regards, Marc

"Rob Smith"  schreef in bericht 
news:b85f4177-9ba4-4be8-b45d-71a2037356b1@googlegroups.com...

Hi

For the past week, once I have compiled and tested then go to make changes 
when I try to generate the exe I get a message saying either the program is 
in use of the .DBG is in use.

I haven't changed any properties in the application.

This only happens to 1 of 3 applications and I am at a lose to find the 
cause, task manager doesn't show the program running but if I try to delete 
it, it tells me it is in use.

The only way I can proceed is to re-boot!

Any suggestions much appreciated.

Thanks

Robert

[toc] | [prev] | [standalone]


Back to top | Article view | comp.lang.clipper.visual-objects


csiph-web