Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #3771 > unrolled thread

Visual Objects 2.9 (build 2902)

Started by"Er!k \\/!$$Er" <nospam@nospam.url>
First post2012-07-14 11:58 +0200
Last post2012-07-15 11:34 -0700
Articles 19 on this page of 39 — 8 participants

Back to article view | Back to comp.lang.clipper.visual-objects


Contents

  Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-14 11:58 +0200
    Re: Visual Objects 2.9 (build 2902) "richard.townsendrose" <richard.townsendrose@gmail.com> - 2012-07-15 04:46 -0700
      Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-15 20:03 +0200
        Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-16 11:23 +0200
          Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-16 12:14 +0200
            Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-16 07:42 -0700
              Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-16 18:36 +0200
                Re: Visual Objects 2.9 (build 2902) Karl Faller <k.faller_withoutthat_@onlinehome.de> - 2012-07-16 18:39 +0200
                  Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-16 18:44 +0200
        Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-16 07:37 -0700
          Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-16 18:41 +0200
            Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 02:31 -0700
              Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 12:14 +0200
                Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 04:11 -0700
                  Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 13:38 +0200
                    Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 05:40 -0700
                      Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 15:30 +0200
                        Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 08:02 -0700
                  Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 14:16 +0200
                    Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 05:52 -0700
                      Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 05:58 -0700
                        Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 16:05 +0200
                          Re: Visual Objects 2.9 (build 2902) Sherlock <sherlock@sherlock.com.au> - 2012-07-17 07:56 -0700
                            Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 17:53 +0200
                    Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 15:53 +0200
                      Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 17:03 +0200
                        Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 17:23 +0200
                          Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 17:49 +0200
                            Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 18:07 +0200
                              Re: Visual Objects 2.9 (build 2902) Massimo Bighelli <info@arcasistemi.it> - 2012-07-17 18:33 +0200
                                Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 19:43 +0200
                                  Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-17 19:55 +0200
                                    Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-17 21:14 +0200
                                      Re: Visual Objects 2.9 (build 2902) "Stephen Quinn" <stevejqNO@bigpondSPAM.net.au> - 2012-07-18 16:13 +1000
                                        Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-18 15:58 +0200
                                          Re: Visual Objects 2.9 (build 2902) "Er!k \\/!$$Er" <nospam@nospam.url> - 2012-07-18 16:08 +0200
                                          Re: Visual Objects 2.9 (build 2902) "Stephen Quinn" <stevejqNO@bigpondSPAM.net.au> - 2012-07-19 01:27 +1000
                                            Re: Visual Objects 2.9 (build 2902) D.J.W. van Kooten <public@ic2remove.this.com> - 2012-07-18 20:51 +0200
    Re: Visual Objects 2.9 (build 2902) igsoftsprl.be@gmail.com - 2012-07-15 11:34 -0700

Page 2 of 2 — ← Prev page 1 [2]


#3809

FromSherlock <sherlock@sherlock.com.au>
Date2012-07-17 05:58 -0700
Message-ID<14014d81-6428-49d5-9bdb-82f2ff65f5df@googlegroups.com>
In reply to#3808
Dick

Check my notes

 MimeHeader(nCode, xContentType, cFile, cCID) CLASS  _CEmail

 IF IsString(cFile) .AND. ! Empty(cFile)

  //cFName := __EncodeField(AllTrim(cFile), SLen(TEMP_FNAME)+1)

 cFName := ["] + AllTrim(cFile) + ["] 
 // changed 17 MAY, 2010 PMG/Karl.Mail servers adding .DAT to attachment ext

Now I remember we would get clients where PDFS had been send with .DAT extension instead from various mail servers and the encoding of the file is not required and rejected by some mail servers.  This fix was such a problem solver for us and cut down a 100 calls a year for support.


Phil

[toc] | [prev] | [next] | [standalone]


#3813

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-17 16:05 +0200
Message-ID<i8sa089ovi4klgrrp0vnqr42bgocqtlu6t@4ax.com>
In reply to#3809
On Tue, 17 Jul 2012 05:58:57 -0700 (PDT), Sherlock
<sherlock@sherlock.com.au> wrote:

Hello Phil,
>
>Check my notes
>
> MimeHeader(nCode, xContentType, cFile, cCID) CLASS  _CEmail
>
> IF IsString(cFile) .AND. ! Empty(cFile)
>
>  //cFName := __EncodeField(AllTrim(cFile), SLen(TEMP_FNAME)+1)
>
> cFName := ["] + AllTrim(cFile) + ["] 
> // changed 17 MAY, 2010 PMG/Karl.Mail servers adding .DAT to attachment ext
>
>Now I remember we would get clients where PDFS had been send with .DAT extension instead from various mail servers
> and the encoding of the file is not required and rejected by some mail servers.  
>This fix was such a problem solver for us and cut down a 100 calls a year for support.

I recently got a mail with a winmail.dat which I can't read. It wasn't
readable as PDF which I think it must have been. Same problem in the
Ipswitch webmail used by our provider.

Does the above code solve that problem somehow you mean? It isn't in
SP4 either I saw.

As written, I am not sure why our bug fixes have not been included in
SP4. I'll carry this discussion over to VPS which I am going to
rejoin, as I have intended to when SP4 would come out, only it's
nearly 2 years later than originaly intended <g>. And VPS might as
well be more useful for Vulcan which we are slowly but steadily
picking up (the first real 'Net things I've programmed in C#
however...)

Dick

[toc] | [prev] | [next] | [standalone]


#3814

FromSherlock <sherlock@sherlock.com.au>
Date2012-07-17 07:56 -0700
Message-ID<dcd3faad-cc40-44c7-bb9f-de4b472c3207@googlegroups.com>
In reply to#3813
dick.

snip[ I recently got a mail with a winmail.dat which I can&#39;t read. It wasn&#39;t> readable as PDF which I think it must have been. Same problem in the
> Ipswitch webmail used by our provider.]

Yes the code I posted will fix and I did pass it to Grafx at that time and I have just checked in VPS and it has not been changed/added.

I have not had any problems with EMail classes and this was the only change I can remember changing.  We have 100's or agents sending out 10,000 email statements a month and every month we would get report 10 or 20 owners could not open the PDFS and have this DAT thing which when you added the PDF extension the file was fine.

Phil McGuinness

[toc] | [prev] | [next] | [standalone]


#3820

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-17 17:53 +0200
Message-ID<bd2b085goj9nncipo6fa3ffg73vtpaq1q8@4ax.com>
In reply to#3814
On Tue, 17 Jul 2012 07:56:26 -0700 (PDT), Sherlock
<sherlock@sherlock.com.au> wrote:

Hello Phil,

>Yes the code I posted will fix and I did pass it to Grafx at that time 
>and I have just checked in VPS and it has not been changed/added.

Like our improvements. Strange. I think they use the VO old mail
client which is so buggy that none of our mails arrived <g>.

>
>I have not had any problems with EMail classes and this was the only change I can remember changing.  
>We have 100's or agents sending out 10,000 email statements

I think that explains it. Sending is not the big problem; most of our
fixes are on receiving mails. E.g. the spelling error in
GetMailTimeStamp causes incoming mails on Wednesday to show as if they
were received on Sunday.

Dick

[toc] | [prev] | [next] | [standalone]


#3812

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-17 15:53 +0200
Message-ID<a6l939F56uU1@mid.individual.net>
In reply to#3806
Hi Dick,

Thanks for your comment. It shows Geoff has given more value to the VO 
community than Phil want to make us believe.

> daily tasks there is more that I miss in VS compared to VO than the
> other way around.

Like the growing repo?  Never seen a problem like that in VS...
<g>

Erik


"D.J.W. van Kooten"  schreef in bericht 
news:usla08dui5vvo9lsb98q50p9m7tg2utei0@4ax.com...

On Tue, 17 Jul 2012 04:11:19 -0700 (PDT), Sherlock
<sherlock@sherlock.com.au> wrote:

Hello Erik & Phil,
>
>Geoff wrote a lot of code and I can tell I do not use any of it. He wrote 
>some very complex code that often
>I would look at say you could do this a hell of lot easier.
>The EMAIL code, his version I tried once and found Access's that did 
>nothing he added to stop compile timing errors.
>Robert and whoever did a much better job on the email, top quality actually 
>and it is not based on Geoffs work.

The truth lies halfway. The original e-mail SDK was barely useable and
Geoff did a lot to get it working. At the end, almost any received
e-mail was decoded correctly and that's a hell of a job as there is
limited 'regulation' in the decoding rules and lots of mail clients
create different coding for the same mail.

In 2.8, the internet classes were created by Sven Ebert. These worked
much faster (decoding e-mails e.g.) so Phil's statement that Geoff's
code was very complex seems true here. We have sent in several
changes, first to Sven, after which also his libraries decoded
correctly, and then to Robert; these are credited in the current SP4
SDK

A pitty however is that our changes we sent for the current internet
library are not included. As a result the current SP4 internet SDK
contains several bugs and a non working IMAP support. One sample:

FUNCTION GetMailTimeStamp(lForceUK AS LOGIC) AS STRING PASCAL
     cRet +=       cRet :=
SubStr("SunMonTueWenThuFriSat",(3*nTmp)-2,3)

should be:
      cRet := SubStr("SunMonTueWedThuFriSat",(3*nTmp)-2,3)

As Wednesday is abbreviated incorrectly with WEN instead of WED, mails
arriving on Wednesday do not get the right day assigned!

I am not sure why our changes we sent to Meinhard have not been
included; maybe he missed some mails... but if you need the internet
SDK to send and receive mails I have to conclude that this library is
not better than the SP3 one.

>Hmm, sounds interesting.   Just tried on one of the repo's most used. The
>current one is 130 Mb, the new build one is 123 MB. That is not even 5 %.
>
We do a lot of exchanging AEF's and I can confirm Phil's statement
that the repro growth; even more than 50% I've seen. So I am quite
happy with the speed improvement.

Finally, I think upgrade costs are very modest; even though not
everything is in it what might have been or what was wished for. MS
support plans are much more expensive even though they have far more
revenue than Grafx and every time I work with Visual Studio I am
unpleasantly surprised how much I can NOT do what I can in VO. For
daily tasks there is more that I miss in VS compared to VO than the
other way around.

Dick 

[toc] | [prev] | [next] | [standalone]


#3815

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-17 17:03 +0200
Message-ID<m2va089l8aavihfosvnp6v242t0ujpu73s@4ax.com>
In reply to#3812
On Tue, 17 Jul 2012 15:53:44 +0200, "Er!k \\/!$$Er"
<nospam@nospam.url> wrote:

Hello Erik,
>> daily tasks there is more that I miss in VS compared to VO than the
>> other way around.
>
>Like the growing repo?  Never seen a problem like that in VS...
><g>
>
That's true. Like you don't have electronic problems in cars before
1980 <g>.

But seriously, until appx VO 2.6 I'd think nobody would have said kind
words about the VO repo. The fact that it grows is not good of course
but I am not sure if that really causes problems. Only I like to clean
it up from time to time. I understand much better where and how my
code is stored than in VS, can acces it faster, edit it safely, export
and move it better and edit it per entity. None of which is possible
in VS.

To show you the 'logic' behind VS organization of files, consider this
C# project where I run all my tests. To have an idea what is stored
under one of my .cs files, I click the arrow. And I click the next
arrow. And the next....and I can  go on whole day, see picture:

www.ic2.com/cavo/VSLogic.JPG

Doesn't make sense to me....if something similair would have happened
in VO we would have had lot's of people complaining here, don't you
think?



Dick

[toc] | [prev] | [next] | [standalone]


#3817

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-17 17:23 +0200
Message-ID<a6leasFdhuU1@mid.individual.net>
In reply to#3815
> www.ic2.com/cavo/VSLogic.JPG
> Doesn't make sense to me....if something similair would have happened
> in VO we would have had lot's of people complaining here, don't you
> think?

Well what on earth do I have to do to see that?
And what are you trying to do?

Erik



"D.J.W. van Kooten"  schreef in bericht 
news:m2va089l8aavihfosvnp6v242t0ujpu73s@4ax.com...

On Tue, 17 Jul 2012 15:53:44 +0200, "Er!k \\/!$$Er"
<nospam@nospam.url> wrote:

Hello Erik,
>> daily tasks there is more that I miss in VS compared to VO than the
>> other way around.
>
>Like the growing repo?  Never seen a problem like that in VS...
><g>
>
That's true. Like you don't have electronic problems in cars before
1980 <g>.

But seriously, until appx VO 2.6 I'd think nobody would have said kind
words about the VO repo. The fact that it grows is not good of course
but I am not sure if that really causes problems. Only I like to clean
it up from time to time. I understand much better where and how my
code is stored than in VS, can acces it faster, edit it safely, export
and move it better and edit it per entity. None of which is possible
in VS.

To show you the 'logic' behind VS organization of files, consider this
C# project where I run all my tests. To have an idea what is stored
under one of my .cs files, I click the arrow. And I click the next
arrow. And the next....and I can  go on whole day, see picture:

www.ic2.com/cavo/VSLogic.JPG

Doesn't make sense to me....if something similair would have happened
in VO we would have had lot's of people complaining here, don't you
think?



Dick 

[toc] | [prev] | [next] | [standalone]


#3819

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-17 17:49 +0200
Message-ID<f12b08tgi01rh84uaqnls344shrrb0h59g@4ax.com>
In reply to#3817
On Tue, 17 Jul 2012 17:23:08 +0200, "Er!k \\/!$$Er"
<nospam@nospam.url> wrote:

Hello Erik,


>
>Well what on earth do I have to do to see that?

Click on the + to unfold what I suppose VS considers child code or
something.

>And what are you trying to do?
>
See if there's any logic in the way the Solution Navigator organizes
or shows my code, like there is in VO.

Apparently there isn't.

Dick

[toc] | [prev] | [next] | [standalone]


#3821

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-17 18:07 +0200
Message-ID<a6lgtkF1a4U1@mid.individual.net>
In reply to#3819
Hoi Dick,

I do not see this behaviour.
I think you managed to mess things up.

Erik


"D.J.W. van Kooten"  schreef in bericht 
news:f12b08tgi01rh84uaqnls344shrrb0h59g@4ax.com...

On Tue, 17 Jul 2012 17:23:08 +0200, "Er!k \\/!$$Er"
<nospam@nospam.url> wrote:

Hello Erik,


>
>Well what on earth do I have to do to see that?

Click on the + to unfold what I suppose VS considers child code or
something.

>And what are you trying to do?
>
See if there's any logic in the way the Solution Navigator organizes
or shows my code, like there is in VO.

Apparently there isn't.

Dick 

[toc] | [prev] | [next] | [standalone]


#3822

FromMassimo Bighelli <info@arcasistemi.it>
Date2012-07-17 18:33 +0200
Message-ID<ju444f$nv9$1@speranza.aioe.org>
In reply to#3821
Il 17/07/2012 18:07, Er!k \/!$$Er ha scritto:
> Hoi Dick,
>
> I do not see this behaviour.
> I think you managed to mess things up.
>
> Erik
>

Erik,

Solution Navigator IS NOT Solution Explorer...

Massimo

[toc] | [prev] | [next] | [standalone]


#3823

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-17 19:43 +0200
Message-ID<a6lmhsFcpsU1@mid.individual.net>
In reply to#3822
Ahg. Never installed the power tools.
Now I see what you mean Dick.  There is a recursive call in this. But 
calling this a problem, no (I do not)
Not having the ability to create/use macro's inside de VO sourcecode editor, 
that is more like a real problem.

Erik





"Massimo Bighelli"  schreef in bericht 
news:ju444f$nv9$1@speranza.aioe.org...


Il 17/07/2012 18:07, Er!k \/!$$Er ha scritto:
> Hoi Dick,
>
> I do not see this behaviour.
> I think you managed to mess things up.
>
> Erik
>

Erik,

Solution Navigator IS NOT Solution Explorer...

Massimo 

[toc] | [prev] | [next] | [standalone]


#3824

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-17 19:55 +0200
Message-ID<a6ln7nFi05U1@mid.individual.net>
In reply to#3823
And if you do not want this recursive behaviour, you can turn it off.
Tools-options-Productivity Power Tools-Solution Navigator: uncheck Enable 
Member expansion.

Erik



"Er!k \/!$$Er"  schreef in bericht news:a6lmhsFcpsU1@mid.individual.net...

Ahg. Never installed the power tools.
Now I see what you mean Dick.  There is a recursive call in this. But
calling this a problem, no (I do not)
Not having the ability to create/use macro's inside de VO sourcecode editor,
that is more like a real problem.

Erik





"Massimo Bighelli"  schreef in bericht
news:ju444f$nv9$1@speranza.aioe.org...


Il 17/07/2012 18:07, Er!k \/!$$Er ha scritto:
> Hoi Dick,
>
> I do not see this behaviour.
> I think you managed to mess things up.
>
> Erik
>

Erik,

Solution Navigator IS NOT Solution Explorer...

Massimo 

[toc] | [prev] | [next] | [standalone]


#3826

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-17 21:14 +0200
Message-ID<ubeb08514dncqrq46ufr0u64mo9m8mrqm8@4ax.com>
In reply to#3824
On Tue, 17 Jul 2012 19:55:02 +0200, "Er!k \\/!$$Er"
<nospam@nospam.url> wrote:

Hello Erik,

>And if you do not want this recursive behaviour, you can turn it off.
>Tools-options-Productivity Power Tools-Solution Navigator: uncheck Enable 
>Member expansion.
>
Smart found! Indeed it's gone.

Which makes me wonder why anyone would want to see this on (or what
else I turned off which IS useful....)

Dick

[toc] | [prev] | [next] | [standalone]


#3827

From"Stephen Quinn" <stevejqNO@bigpondSPAM.net.au>
Date2012-07-18 16:13 +1000
Message-ID<ttsNr.663$qv3.593@viwinnwfe01.internal.bigpond.com>
In reply to#3826
Dick

> Which makes me wonder why anyone would want to see this on (or what
> else I turned off which IS useful....)

That's why you need to RTM so you can make an informed choice<g>

CYA
Steve 

[toc] | [prev] | [next] | [standalone]


#3830

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-18 15:58 +0200
Message-ID<pmfd08thgfq6eclskaq611cire59i2otk0@4ax.com>
In reply to#3827
On Wed, 18 Jul 2012 16:13:25 +1000, "Stephen Quinn"
<stevejqNO@bigpondSPAM.net.au> wrote:

Hello Steve,
>
>> Which makes me wonder why anyone would want to see this on (or what
>> else I turned off which IS useful....)
>
>That's why you need to RTM so you can make an informed choice<g>
>

Yes, a manual would be very nice. However, there is none. Most
software I know, including our own, have context dependent help. VS
hasn't. No tooltips either. If I press F1, or the question mark on the
screen I get:

"Can’t find requested content on your computer"

So probably I need to download some extra help file, if there would be
one, but which? 

As Erik said, this comes from "Productivity Power Tools" , and this
comes as ProPowerTools.vsix; no help file either.  Try "enable member
expansion" in Google, no results found.

There's limited information in the download page:
http://visualstudiogallery.msdn.microsoft.com/d0d33361-18e2-46c0-8ff2-4adea1e34fef/

but no explanation about this choice, let alone what use it is to have
a recursive call in it..

As I love to make informed choices, I'd appreciate if you can point me
out where I can RTM...

Did I already tell you I don't like Microsoft products <g>?

Dick

[toc] | [prev] | [next] | [standalone]


#3831

From"Er!k \\/!$$Er" <nospam@nospam.url>
Date2012-07-18 16:08 +0200
Message-ID<a6nuaiFem4U1@mid.individual.net>
In reply to#3830
Dick,

Visual Studio has very good documentation and context-sensitive help and it 
works with problems.
If you google you'll find some, but very little items on the subject. If 
this is a common problem, you would find more results, wouldn't you.


Erik


"D.J.W. van Kooten"  schreef in bericht 
news:pmfd08thgfq6eclskaq611cire59i2otk0@4ax.com...

On Wed, 18 Jul 2012 16:13:25 +1000, "Stephen Quinn"
<stevejqNO@bigpondSPAM.net.au> wrote:

Hello Steve,
>
>> Which makes me wonder why anyone would want to see this on (or what
>> else I turned off which IS useful....)
>
>That's why you need to RTM so you can make an informed choice<g>
>

Yes, a manual would be very nice. However, there is none. Most
software I know, including our own, have context dependent help. VS
hasn't. No tooltips either. If I press F1, or the question mark on the
screen I get:

"Can’t find requested content on your computer"

So probably I need to download some extra help file, if there would be
one, but which?

As Erik said, this comes from "Productivity Power Tools" , and this
comes as ProPowerTools.vsix; no help file either.  Try "enable member
expansion" in Google, no results found.

There's limited information in the download page:
http://visualstudiogallery.msdn.microsoft.com/d0d33361-18e2-46c0-8ff2-4adea1e34fef/

but no explanation about this choice, let alone what use it is to have
a recursive call in it..

As I love to make informed choices, I'd appreciate if you can point me
out where I can RTM...

Did I already tell you I don't like Microsoft products <g>?

Dick 

[toc] | [prev] | [next] | [standalone]


#3832

From"Stephen Quinn" <stevejqNO@bigpondSPAM.net.au>
Date2012-07-19 01:27 +1000
Message-ID<CzANr.601$Oq4.241@viwinnwfe02.internal.bigpond.com>
In reply to#3830
Dick

When I last installed VS (2004/5/6) I think the help was a separate d/l & 
install from the CD/DVD I was using.

Note: I haven't installed any VS version for a long time so maybe they don't 
ship it with the tool anymore and you have to d/l it from MSDN.

or

Are you using the limited version that Graftx supplies/d with VULCAN?
Could that be why you have no help files.

> Did I already tell you I don't like Microsoft products <g>?
Well I knew that
    - but it seems to me as if you didn't install all that's required to 
make an informed choice this time<bg>

CYA
Steve 

[toc] | [prev] | [next] | [standalone]


#3834

FromD.J.W. van Kooten <public@ic2remove.this.com>
Date2012-07-18 20:51 +0200
Message-ID<101e085g9cf7ni0m2741dnie15148073e9@4ax.com>
In reply to#3832
On Thu, 19 Jul 2012 01:27:47 +1000, "Stephen Quinn"
<stevejqNO@bigpondSPAM.net.au> wrote:

Hello Stephen,
>
>When I last installed VS (2004/5/6) I think the help was a separate d/l & 
>install from the CD/DVD I was using.
>Are you using the limited version that Graftx supplies/d with VULCAN?

No. I downloaded an MSDN VS 2010 Professional. This requires you to
start a special program where you check which help files you want to
download. I've checked as many as I found relevant resulting in a
downloadtime of over an hour. 

>    - but it seems to me as if you didn't install all that's required to 
>make an informed choice this time<bg>
>

Well, as written, the PowerTools simply come without documentation. At
Microsoft there are far more people working on the department Dancing
Paperclips or Stupid New Interfaces than on the department Relevant
Documentaion. As Erik said, info about PowerTools is maybe not in high
demand, but I still would prefer knowing why an option showing
recusive info is checked by default than that I would need dancing
paperclips or Metro interfaces.

Dick

[toc] | [prev] | [next] | [standalone]


#3778

Fromigsoftsprl.be@gmail.com
Date2012-07-15 11:34 -0700
Message-ID<b41e92e3-4dc1-4454-8bc0-12dbbf94de7d@googlegroups.com>
In reply to#3771
Le samedi 14 juillet 2012 11:58:08 UTC+2, Er!k /!$$Er a écrit :
> Look what I have found! VO2.9 is here ! 
> 
> Set the quality to 1080 and show it full screen for the best result.
> 
> http://www.youtube.com/watch?v=roVgBsXkU7Q
> 
> 
> Erik
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> (no need to see this is just a little joke)

already deleted !!

[toc] | [prev] | [standalone]


Page 2 of 2 — ← Prev page 1 [2]

Back to top | Article view | comp.lang.clipper.visual-objects


csiph-web