Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.lang.clipper.visual-objects > #9128
| Message-ID | <nbqbqg.2vs.1@xsharp.info> (permalink) |
|---|---|
| Subject | Re: VO 2.8 SP 4 |
| Newsgroups | comp.lang.clipper.visual-objects |
| References | (4 earlier) <1frvdb95of74u8ipdlag2426v8jbur46th@4ax.com> <dkauc7Fo2a9U1@mid.individual.net> <dvl0ebtjk2e9o4616q9t3eh2706ona3bnh@4ax.com> <nbpvo7$mj6$1@dont-email.me> <nbpvre$mj6$2@dont-email.me> |
| From | Chris Pyrgas <chris_at@xsharp _dot.eu> |
| Date | 2016-03-10 00:33 +0200 |
Hi Johan, > Oh VIDE even recognize that I have opened the file in NotePad and > modified it from there. Well, I have to admit, I am not doing anything sophisticated for it to work like that! All VIDE does is to check if the file stamp of the .prg has changed :-) Chris > > On 2016/03/09 22:09, Johan Nel wrote: >> Dick, >> >> Yes you can have VIDE and VS share the same files. Just create a >> project in VIDE and add files. Point to the existing VS solution file >> and on the prompt if you want the file to be copied into the Project >> folder select No. >> >> I even use it inside VIDE where I have Shared code in a Shared Project >> and have multiple projects sharing the same .prg. If you have it open >> in multiple projects even VIDE will warn you that it was updated by >> another process and if it need to be refreshed from file if you select >> the same file in another project. >> >> Regards, >> >> On 2016/03/09 19:13, D.J.W. van Kooten wrote: >>> On Wed, 9 Mar 2016 16:38:44 +0100, "Wolfgang Riedmann" >>> <wriedmann@gmail.com> wrote: >>> >>> Hello Wolfgang, >>> >>>> therefore I use VIDE whenever possible. >>> I like Vide much more as well, although it doesn't have a repo as VO >>> either of course. My main problem is that I also have Universal Apps, >>> C# code and lots of samples I download as complete VS project. Then >>> it's difficult to decide if I should be working in 1 bad environment >>> (only) or have 2 environments in which I need to switch every time. >>> >>> I think I should investigate if I can do regular programming in Vide >>> on the same files which are also used in VS. So when I need to switch >>> to VS it (hopefully) mentions that files in the project have been >>> changed by another editor. Maybe worth a try. And with X# I expect to >>> be able to do more. >>>> The indenting of the VS editor alone is enough to drive me crazy <g>. >>> It's terrible isn't it? In Vulcan I have seen my METHOD's indent 1 tab >>> - suddenly and all of them. So I proceed again with deleting a few >>> dozens tab all around my program..... >>> >>>> For WPF development I'm in process to switching to a composite >>>> development: the windows are designed in VS and built as libraries. >>>> The code is written in VIDE and uses the windows from the DLLs. >>>> >>>> A sample how this works is here: >>>> http://www.riedmann.it/download/XAML_VIDE.zip >>>> >>> I'll give your sample a try but I just wonder if my suggestion above >>> works too.. >>> >>> Dick >> >> -- >> *Johan Nel* >> /Grafx Support Team (Vulcan.NET)/ >> George, South Africa >> >> >> This email has been sent from a virus-free computer protected by Avast. >> www.avast.com >> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> >> >> > > -- > *Johan Nel* > /Grafx Support Team (Vulcan.NET)/ > George, South Africa > > > This email has been sent from a virus-free computer protected by Avast. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > >
Back to comp.lang.clipper.visual-objects | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
VO 2.8 SP 4 Jürgen Knauf <trotterklaus@googlemail.com> - 2016-03-08 09:54 -0800
Re: VO 2.8 SP 4 "Jamal Assaf" <someone@example.com> - 2016-03-08 13:39 -0500
Re: VO 2.8 SP 4 Jürgen Knauf <trotterklaus@googlemail.com> - 2016-03-08 10:57 -0800
Re: VO 2.8 SP 4 "Jamal Assaf" <someone@example.com> - 2016-03-08 14:23 -0500
Re: VO 2.8 SP 4 D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-03-08 20:41 +0100
Re: VO 2.8 SP 4 "Jamal Assaf" <someone@example.com> - 2016-03-08 15:58 -0500
Re: VO 2.8 SP 4 D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-03-09 10:47 +0100
Re: VO 2.8 SP 4 "Wolfgang Riedmann" <wriedmann@gmail.com> - 2016-03-09 16:38 +0100
Re: VO 2.8 SP 4 D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2016-03-09 18:13 +0100
Re: VO 2.8 SP 4 "Wolfgang Riedmann" <wriedmann@gmail.com> - 2016-03-09 21:23 +0100
Re: VO 2.8 SP 4 Chris Pyrgas <chris_at@xsharp _dot.eu> - 2016-03-10 00:42 +0200
Re: VO 2.8 SP 4 Karl Faller <mail_withoutthat_@_drei-f_andthat_.de> - 2016-03-10 10:40 +0100
Re: VO 2.8 SP 4 Chris Pyrgas <chris_at@xsharp _dot.eu> - 2016-03-10 13:27 +0200
Re: VO 2.8 SP 4 "Wolfgang Riedmann" <wriedmann@gmail.com> - 2016-03-10 17:23 +0100
Re: VO 2.8 SP 4 Karl Faller <mail_withoutthat_@_drei-f_andthat_.de> - 2016-03-10 21:43 +0100
Re: VO 2.8 SP 4 Chris Pyrgas <chris_at@xsharp _dot.eu> - 2016-03-11 00:12 +0200
Re: VO 2.8 SP 4 Chris Pyrgas <chris_at@xsharp _dot.eu> - 2016-03-10 00:33 +0200
Re: VO 2.8 SP 4 Chris Pyrgas <chris_at@xsharp _dot.eu> - 2016-03-10 11:27 +0200
Re: VO 2.8 SP 4 Jürgen Knauf <trotterklaus@googlemail.com> - 2016-03-08 22:36 -0800
csiph-web