Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.lang.clipper.visual-objects > #9482
| From | "Wolfgang Riedmann" <wriedmann@gmail.com> |
|---|---|
| Newsgroups | comp.lang.clipper.visual-objects |
| Subject | Re: SetMaxDynSize VS SetMaxThreadDynSize |
| Date | 2016-06-23 04:08 +0200 |
| Message-ID | <dt0ukmF4gefU1@mid.individual.net> (permalink) |
| References | <nk9egt$fha$1@news.albasani.net> <nkdrbu.3l4.1@xsharp.info> |
Hi Robert,
this is a very interesting piece of code! Thank you very much!
But hopefully I'll be able to move my largest programs over to .NET in
the next 12 months, so I don't need this anymore (again: I hope!)
Wolfgang
Robert van der Hulst wrote:
> Jim,
>
> SetMaxDynSize sets the size for the main thread.
> And there is really no "optimal value". What you should keep in mind
> is:
>
> - VO will use static memory for a lot of things, such as the Symbol
> table, Runtime Class information etc. MemTotal() tells you how much
> is allocated at a certain moment. - Whatever you allocate for
> dynamic memory will be allocated twice. VO works with 2 dynamic
> memory pages (one of these is active)
>
>
> In apps that may require a lot of memory I call a method from a timer
> on the shell where I am keeping track of the used and free memory.
> See below.
>
> At startup I initialize an initial amount of memory
> SetMaxDynSize(0x4000000) // Total 64 Mb per Dynamic Page = 128 Mb
> total DynSize(500) // = Preallocate 500 pages of 64 Kb
>
>
> from the timer on the shell I call this method. You may use it at
> your own risk <g>.
>
> METHOD CheckDynMemSize() CLASS MySHELL
> LOCAL nActualSizeAllocated AS DWORD
> LOCAL nActualSizeused AS DWORD
> LOCAL nActualSizeMax AS DWORD
> LOCAL nMaxDynAllowed AS DWORD
> LOCAL nMaxPages AS DWORD
> LOCAL nNewSizeInPages AS DWORD
> LOCAL nNewSizeInBytes AS DWORD
> LOCAL nUsed, nMax, nCheck AS DWORD
> STATIC lBusy AS LOGIC
> IF ! lBusy
> lBusy := TRUE
> // Check RegisterAxit
> nUsed := Memory(MEMORY_REGISTERAXIT)
> nMax := SetMaxRegisteredAxitMethods(0)
> nCheck := DWORD(MulDiv(LONG(nMax), 90, 100))
> IF nUsed > nCheck // > 90%
> DebOut("Approaching RegisterAxit limit, COLLECTFORCED")
> Sleep(2000)
> CollectForced()
> nUsed := Memory(MEMORY_REGISTERAXIT)
> IF nUsed > nCheck
> SetMaxRegisteredAxitMethods(DWORD(nMax * 1.5)) // 50%
> more ENDIF
> ENDIF
> // Check RegisterKid
> nUsed := Memory(MEMORY_REGISTERKID)
> nMax := SetMaxRegisteredKids(0)
> nCheck := DWORD(MulDiv(LONG(nMax), 90, 100))
> IF nUsed > nCheck // > 90%
> DebOut("Approaching RegisterKid limit, COLLECTFORCED")
> Sleep(2000)
> CollectForced()
> nUsed := Memory(MEMORY_REGISTERKID)
> IF nUsed > nCheck
> SetMaxRegisteredKids(DWORD(nMax * 1.5)) // 50% more
> ENDIF
> ENDIF
> // Check KidStackSize
> nUsed := Memory(MEMORY_STACKKID)
> nMax := SetKidStackSize(0)
> nCheck := DWORD(MulDiv(LONG(nMax), 90, 100))
> IF nUsed > nCheck // > 90%
> DebOut("Approaching KidStack limit, COLLECTFORCED")
> Sleep(2000)
> CollectForced()
> nUsed := Memory(MEMORY_STACKKID)
> IF nUsed > nCheck
> SetKidStackSize(DWORD(nMax * 1.5)) // 50% more
> ENDIF
> ENDIF
>
> nMaxDynAllowed := 1024*1024*128
> nMaxPages := nMaxDynAllowed /0x10000
> nActualSizeAllocated := DynInfoSize() * 0x10000
> // DyInfoSize returns the number of 64Kb pages
> nActualSizeused := DynInfoUsed()
> nActualSizeMax := SetMaxDynSize(0)
> // When we have used 80 % or more of the allocated memory,
> // then it is time to allocate some more pages
> IF nActualSizeused > nActualSizeAllocated * 0.80
> CollectForced()
> nActualSizeused := DynInfoUsed()
>
> IF nActualSizeused > nActualSizeAllocated * 0.80
> nNewSizeInPages := DynInfoSize() +25
> nNewSizeInBytes := nNewSizeInPages * 0x10000
> // Make sure that we do not allocate more then the
> DynInfoMax. // If we reach that, then we need to set
> the max to a higher number IF nNewSizeInBytes >=
> nActualSizeMax IF nNewSizeInPages >= nMaxPages
> // Allocate some extra memory just to be sure
> SetMaxDynSize(nMaxDynAllowed)
> ELSE
> // Allocate some extra memory just to be sure
> SetMaxDynSize(nNewSizeInBytes)
> DynSize(nNewSizeInPages-1)
> ENDIF
> ELSE
> DynSize(nNewSizeInPages)
> ENDIF
>
> ENDIF
> ENDIF
> lBusy := FALSE
> ENDIF
> RETURN NIL
>
>
>
> Robert
>
> > I know the default for the SetMaxDynSize() and
> > SetMaxThreadDynSize() is 16MB.
> >
> > The help file says about SetMaxThreadDynSize() that it is used a NEW
> > thread, what about the running app?
> >
> > Is this redundant and SetMaxDynSize() is what is only needed if I
> > am not using threads ?
> >
> > Jim
--
Back to comp.lang.clipper.visual-objects | Previous | Next — Previous in thread | Find similar | Unroll thread
SetMaxDynSize VS SetMaxThreadDynSize "Jim" <nospam@example.com> - 2016-06-20 15:00 -0400
Re: SetMaxDynSize VS SetMaxThreadDynSize "Jim" <nospam@example.com> - 2016-06-22 01:47 -0400
Re: SetMaxDynSize VS SetMaxThreadDynSize "Arne Ortlinghaus" <Arne.Ortlinghaus@acs.it> - 2016-06-22 10:54 +0200
Re: SetMaxDynSize VS SetMaxThreadDynSize Robert van der Hulst <robert@xsharp.eu> - 2016-06-22 11:04 +0200
Re: SetMaxDynSize VS SetMaxThreadDynSize "Arne Ortlinghaus" <Arne.Ortlinghaus@acs.it> - 2016-06-22 17:35 +0200
Re: SetMaxDynSize VS SetMaxThreadDynSize "Jim" <nospam@example.com> - 2016-06-22 12:17 -0400
Re: SetMaxDynSize VS SetMaxThreadDynSize "Wolfgang Riedmann" <wriedmann@gmail.com> - 2016-06-23 04:08 +0200
csiph-web