Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.arch.embedded > #27856
| From | Chris <xxx.syseng.yyy@gfsys.co.uk> |
|---|---|
| Newsgroups | comp.arch.embedded |
| Subject | Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? |
| Date | 2018-06-26 22:40 +0100 |
| Organization | Aioe.org NNTP Server |
| Message-ID | <pgubsq$8qs$1@gioia.aioe.org> (permalink) |
| References | <863e9638-ccfc-421c-9cee-5030504792be@googlegroups.com> |
On 06/26/18 17:51, dashley@gmail.com wrote: > We do embedded software, but the hardware is produced by our customer (we don't control it). > > Sometimes we need to attach a wire (for monitoring a serial or I2C interface, or for timing instrumentation) to a surface-mount IC where the pins are VERY close together. The pins are so close together that I can't solder a wire to it, even using high-power optics and the finest soldering iron tip available. > > Are there any special tools, equipment, training, or techniques that might help with this? > > Thanks! Part of the hardware design is to put test points on the board where they are needed and always build in enough diagnostic capability :-)... Chris
Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? dashley@gmail.com - 2018-06-26 09:51 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Rob Gaddi <rgaddi@highlandtechnology.invalid> - 2018-06-26 10:21 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Chris <xxx.syseng.yyy@gfsys.co.uk> - 2018-06-26 22:40 +0100
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Dave Nadler <drn@nadler.com> - 2018-06-27 18:31 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Evgeny Filatov <evgeny.filatov@ieee.org> - 2018-06-28 13:10 +0300
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? John Speth <johnspeth@yahoo.com> - 2018-06-26 17:06 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Theo <theom+news@chiark.greenend.org.uk> - 2018-06-28 00:40 +0100
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? John Speth <johnspeth@yahoo.com> - 2018-06-28 12:03 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2018-06-28 20:13 -0400
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? gnuarm.deletethisbit@gmail.com - 2018-06-26 19:29 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? Ed Prochak <edprochak@gmail.com> - 2018-06-27 09:53 -0700
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? John Devereux <john@devereux.me.uk> - 2018-06-27 20:28 +0100
Re: How to Solder a Wire to Surface-Mount IC With Pins VERY Close Together? 1 Lucky Texan <1luckytexan@gmail.com> - 2018-08-03 09:47 -0700
csiph-web