Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > alt.comp.os.windows-10 > #197813 > unrolled thread

smartphone disables laptop

Started bymicky <NONONOmisc07@fmguy.com>
First post2026-11-16 13:57 +0200
Last post2026-11-20 19:08 +1100
Articles 20 on this page of 53 — 12 participants

Back to article view | Back to alt.comp.os.windows-10


Contents

  smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-16 13:57 +0200
    Re: smartphone disables laptop Andy Burns <usenet@andyburns.uk> - 2026-11-16 12:24 +0000
      Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-16 17:36 +0200
        Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-16 11:23 -0500
          Re: smartphone disables laptop "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 03:06 +0100
          Re: smartphone disables laptop Mark Lloyd <nomail@here.invalid> - 2026-11-17 15:54 +0000
            Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-18 19:49 +1100
              Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-18 05:48 -0500
                Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-18 23:18 +1100
            Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-18 18:42 +0200
          Re: smartphone disables laptop "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-11-17 21:20 +0000
            Re: smartphone disables laptop Lars Poulsen <lars@beagle-ears.com> - 2026-11-17 18:34 -0800
            Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-18 19:56 +1100
              Re: smartphone disables laptop "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-11-18 13:20 +0000
                Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-19 20:58 +1100
                  Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-19 09:36 -0500
                    Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-22 20:53 +1100
                      Re: smartphone disables laptop "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-11-22 10:29 +0000
                        Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-22 23:25 +1100
            Re: smartphone disables laptop Andy Burns <usenet@andyburns.uk> - 2026-11-18 13:42 +0000
              Re: smartphone disables laptop Andy Burns <usenet@andyburns.uk> - 2026-11-18 13:51 +0000
            Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-18 18:47 +0200
              Re: smartphone disables laptop Andy Burns <usenet@andyburns.uk> - 2026-11-18 17:27 +0000
              Re: smartphone disables laptop Frank Slootweg <this@ddress.is.invalid> - 2026-11-18 18:51 +0000
        Re: smartphone disables laptop Frank Slootweg <this@ddress.is.invalid> - 2026-11-16 16:35 +0000
          Re: smartphone disables laptop knuttle <keith_nuttle@yahoo.com> - 2026-11-16 13:07 -0500
            Re: smartphone disables laptop Mark Lloyd <nomail@here.invalid> - 2026-11-17 15:55 +0000
              Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-17 18:35 +0200
          Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-17 12:30 +0200
          Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-18 19:59 +1100
    Re: smartphone disables laptop Frank Slootweg <this@ddress.is.invalid> - 2026-11-16 16:28 +0000
      Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-16 14:12 -0500
      Re: smartphone disables laptop micky <NONONOmisc07@fmguy.com> - 2026-11-17 12:55 +0200
    Re: smartphone disables laptop ...w¡ñ§±¤ñ <winstonmvp@gmail.com> - 2026-11-16 12:17 -0700
      Re: smartphone disables laptop Frank Slootweg <this@ddress.is.invalid> - 2026-11-16 19:55 +0000
        Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-16 22:56 -0500
          Re: smartphone disables laptop "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 11:48 +0100
            Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-17 09:08 -0500
              Re: smartphone disables laptop Daniel70 <daniel47@nomail.afraid.org> - 2026-11-18 21:47 +1100
                Re: smartphone disables laptop Paul <nospam@needed.invalid> - 2026-11-18 06:01 -0500
      Battery matters (was: Re: smartphone disables laptop) "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-11-17 21:56 +0000
        Re: Battery matters Paul <nospam@needed.invalid> - 2026-11-18 00:38 -0500
          Unblocking (was: Re: Battery matters) "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-11-18 13:35 +0000
            Re: Unblocking Frank Slootweg <this@ddress.is.invalid> - 2026-11-18 15:04 +0000
            Re: Unblocking ...w¡ñ§±¤ñ <winstonmvp@gmail.com> - 2026-11-18 09:46 -0700
              Re: Unblocking JJ <jj4public@gmail.com> - 2026-11-19 12:50 +0700
                Re: Unblocking Paul <nospam@needed.invalid> - 2026-11-19 02:42 -0500
                Re: Unblocking Andy Burns <usenet@andyburns.uk> - 2026-11-19 08:27 +0000
          Re: Battery matters Daniel70 <daniel47@nomail.afraid.org> - 2026-11-19 21:22 +1100
            Re: Battery matters Andy Burns <usenet@andyburns.uk> - 2026-11-19 11:42 +0000
              Re: Battery matters Daniel70 <daniel47@nomail.afraid.org> - 2026-11-19 22:53 +1100
                Re: Battery matters Andy Burns <usenet@andyburns.uk> - 2026-11-19 12:04 +0000
                  Re: Battery matters Daniel70 <daniel47@nomail.afraid.org> - 2026-11-20 19:08 +1100

Page 2 of 3 — ← Prev page 1 [2] 3  Next page →


#197917

FromAndy Burns <usenet@andyburns.uk>
Date2026-11-18 13:51 +0000
Message-ID<nm5orhFqlfmU1@mid.individual.net>
In reply to#197916
Andy Burns wrote:

[Sorry clicked 'send' straight away]

> "J. P. Gilliver" wrote:
> 
>> I don't think thereis a magnet in most smartphones, 

None of the phones I presently own have a magnet (tested by offering up 
a small washer to them)

>> though there is something a magnet will happily cling to

my tablet and e-reader do have magnets, I suspect more recent phones 
have "magsafe" charging/docking ... the same name used to refer to apple 
proprietary magnetic charging cable that would easily come loose if 
accidentally tugged-on now it refers to wireless charging with magnets 
to align the coils.

[toc] | [prev] | [next] | [standalone]


#197924

Frommicky <NONONOmisc07@fmguy.com>
Date2026-11-18 18:47 +0200
Message-ID<fclrflhktpg0fcpl6fidm4808en2d0uhkv@4ax.com>
In reply to#197869
In alt.comp.os.windows-11, on Tue, 17 Nov 2026 21:20:08 +0000, "J. P.
Gilliver" <G6JPG@255soft.uk> wrote:

>On 2026/11/16 16:23:40, Paul wrote:
>> On Mon, 11/16/2026 10:36 AM, micky wrote:
>>> In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
>>> Burns <usenet@andyburns.uk> wrote:
>[]
>>>> Magnets.
>>>>
>>>> The laptop uses a hall-effect sensor to detect if the lid is closed.
>>>
>>> Wow. Maybe they should warn people. What if I'd thrown the laptop in the
>>> trash!
>[]
>> The question we want answered now, is when you get two
>> smartphones stuck to one another with magnets, how do
>> you get them separated ? Mini-crowbar ?
>> 
>> Hall Effect sensors aren't exactly efficient. They use the Right-Hand Rule
>> of Physics, with Field, Voltage, Current on three different axis. The sensitivity
>> is controlled by the amount of current. We used to play with those in
>> Physics lab. Field times Current is proportional to voltage. The ones in
>> the lab ran at 150mA. Which is, relatively speaking, a lot of current.
>
>And would have a significant effect on battery life in a laptop.
>
>> If you turned the current down to 2mA, you'd need quite a field to
>> operate one. Part of using a Hall Probe, is building a constant current
>> source to operate it. That's so the "gain" is fixed. the semiconductor
>
>I wasn't aware laptops used them to detect lid closed - I thought it was
>a switch in the hinge - but, if they do, it wouldn't have to be as
>sensitive as one for lab use - the manufacturer knows where they put the
>magnet in the lid, so could use quite an insensitive (and thus
>low-current) sensor. (They wouldn't _want_ it to be too sensitive, lest
>what happened to micky happens!)

I've been able 5 or 6 times to reproduce it sleeping when the phone is
on the laptop, but that is out of 20 or more times I've tried.   I can't
tell why it does it sometimes and not others.  One time at least, the
top of the phone was to the right and down on the right edge of the
laptop, and the phone was at about a 45^ angle.  But other times that
did nothing.   I have a speaker at the top of the phone. Do they use
magnets? 
>[]
>> You would think there would be a hazard warning on the smartphone,
>> regarding that magnet.
>[]
>> It's a good thing Andy knew that -- I don't have a SmartPhone and would
>> have no idea there is a magnet in there. One more hazard...
>> 
>>    Paul
>
>I don't think there _is_ a magnet in most smartphones, though there is
>something a magnet will happily cling to (the cell maybe?); however, if
>you've bought one of those flat square magnets sold for sticking
>smartphones to things (like car dashboards), and forgotten you've left
>it stuck to the 'phone, the effect would be the same. and maybe some
>'phone _cases_ have a magnet in them for a similar purpose.

My phone is supposed to do wireless charging but I haven't tried that.
And I have a metal plate under the case to make it stick to a dashboard
magnet. I think the metal plate would weaken the effect of the phone's
wireless charging coil. 

>Please use the Reply-To: rather than the From: email address.

[toc] | [prev] | [next] | [standalone]


#197925

FromAndy Burns <usenet@andyburns.uk>
Date2026-11-18 17:27 +0000
Message-ID<nm65f6F1pgsU1@mid.individual.net>
In reply to#197924
micky wrote:

> My phone is supposed to do wireless charging but I haven't tried that.
> And I have a metal plate under the case to make it stick to a dashboard
> magnet. I think the metal plate would weaken the effect of the phone's
> wireless charging coil.

I had an older phone (Nexus4 I think) with a magnetic charging base in 
the car, bring the phone anywhere close and ... THUNK! it would be 
strongly attached, the only problem was when stationary the satnav would 
constantly flip around because the magnetometer was overwhelmed, once 
you were moving it knew from GPS changes which way it was really heading ...

[toc] | [prev] | [next] | [standalone]


#197926

FromFrank Slootweg <this@ddress.is.invalid>
Date2026-11-18 18:51 +0000
Message-ID<11dkvke.17c.1@ID-201911.user.individual.net>
In reply to#197924
micky <NONONOmisc07@fmguy.com> wrote:
[...]

> I've been able 5 or 6 times to reproduce it sleeping when the phone is
> on the laptop, but that is out of 20 or more times I've tried.   I can't
> tell why it does it sometimes and not others.  One time at least, the
> top of the phone was to the right and down on the right edge of the
> laptop, and the phone was at about a 45^ angle.  But other times that
> did nothing.   I have a speaker at the top of the phone. Do they use
> magnets? 

  "at the top"? A speaker *in* the phone or a speaker box on top of the
phone?

  If the latter: Is the pope catholic?

  So here we (might) have magnet number one.

[...]

> My phone is supposed to do wireless charging but I haven't tried that.

  As has been explained wireless charging uses a magnet on the phone to
align the phone to the wireless charging station.

  So here we have magnet number one/two.

> And I have a metal plate under the case to make it stick to a dashboard
> magnet. I think the metal plate would weaken the effect of the phone's
> wireless charging coil. 

  The magnet in the car will magnetize the metal plate on the phone.

  So here we have magnet number two/three.

  Is that enough magnets for you (to trigger the lid-closure effect)?

[toc] | [prev] | [next] | [standalone]


#197821

FromFrank Slootweg <this@ddress.is.invalid>
Date2026-11-16 16:35 +0000
Message-ID<11dfes3.of4.1@ID-201911.user.individual.net>
In reply to#197817
micky <NONONOmisc07@fmguy.com> wrote:
> In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
> Burns <usenet@andyburns.uk> wrote:
> 
> >
> >micky wrote:
> >
> >> I laid my smartphone on the blank part of the laptop to the right of
> >> the touchpad, not touching any keys. About that time,the screen went
> >> dark.
> >>> What's going on?
> >
> >Magnets.
> >
> >The laptop uses a hall-effect sensor to detect if the lid is closed.
> 
> Wow. Maybe they should warn people. What if I'd thrown the laptop in the
> trash!

  You mean like they should warn people not to put their cat in the
washing machine?

[toc] | [prev] | [next] | [standalone]


#197824

Fromknuttle <keith_nuttle@yahoo.com>
Date2026-11-16 13:07 -0500
Message-ID<11dfgor$3pen9$1@dont-email.me>
In reply to#197821
On 11/16/2026 11:35 AM, Frank Slootweg wrote:
> micky <NONONOmisc07@fmguy.com> wrote:
>> In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
>> Burns <usenet@andyburns.uk> wrote:
>>
>>>
>>> micky wrote:
>>>
>>>> I laid my smartphone on the blank part of the laptop to the right of
>>>> the touchpad, not touching any keys. About that time,the screen went
>>>> dark.
>>>>> What's going on?
>>>
>>> Magnets.
>>>
>>> The laptop uses a hall-effect sensor to detect if the lid is closed.
>>
>> Wow. Maybe they should warn people. What if I'd thrown the laptop in the
>> trash!
> 
>    You mean like they should warn people not to put their cat in the
> washing machine?
Or put your hand under a rotary mower

[toc] | [prev] | [next] | [standalone]


#197851

FromMark Lloyd <nomail@here.invalid>
Date2026-11-17 15:55 +0000
Message-ID<6afc7909$5$3702143$882e4bbb@reader.netnews.com>
In reply to#197824
On Mon, 16 Nov 2026 13:07:22 -0500, knuttle wrote:

[snip]

>>    You mean like they should warn people not to put their cat in the
>> washing machine?
> Or put your hand under a rotary mower

I've seen mowers that have warning labels about that.

-- 
38 days until the winter celebration (Friday, December 25, 2026 00:00
for 1 day).

Mark Lloyd
http://notstupid.us/

"The idea of a good society is something you do not need a religion and
eternal punishment to buttress; you need a religion if you are terrified
of death." [Gore Vidal]

[toc] | [prev] | [next] | [standalone]


#197854

Frommicky <NONONOmisc07@fmguy.com>
Date2026-11-17 18:35 +0200
Message-ID<th0pflpsofok7vv3uevob1h8t5srk29qdn@4ax.com>
In reply to#197851
In alt.comp.os.windows-11, on 17 Nov 2026 15:55:53 GMT, Mark Lloyd
<nomail@here.invalid> wrote:

>On Mon, 16 Nov 2026 13:07:22 -0500, knuttle wrote:
>
>[snip]
>
>>>    You mean like they should warn people not to put their cat in the
>>> washing machine?
>> Or put your hand under a rotary mower
>
>I've seen mowers that have warning labels about that.

LOL.  That should help me. 

[toc] | [prev] | [next] | [standalone]


#197837

Frommicky <NONONOmisc07@fmguy.com>
Date2026-11-17 12:30 +0200
Message-ID<46boflppf0cisc35h9be2hqkj4o3rrs6cl@4ax.com>
In reply to#197821
In alt.comp.os.windows-11, on 16 Nov 2026 16:35:11 GMT, Frank Slootweg
<this@ddress.is.invalid> wrote:

>micky <NONONOmisc07@fmguy.com> wrote:
>> In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
>> Burns <usenet@andyburns.uk> wrote:
>> 
>> >
>> >micky wrote:
>> >
>> >> I laid my smartphone on the blank part of the laptop to the right of
>> >> the touchpad, not touching any keys. About that time,the screen went
>> >> dark.
>> >>> What's going on?
>> >
>> >Magnets.
>> >
>> >The laptop uses a hall-effect sensor to detect if the lid is closed.
>> 
>> Wow. Maybe they should warn people. What if I'd thrown the laptop in the
>> trash!
>
>  You mean like they should warn people not to put their cat in the
>washing machine?

That too.  

[toc] | [prev] | [next] | [standalone]


#197890

FromDaniel70 <daniel47@nomail.afraid.org>
Date2026-11-18 19:59 +1100
Message-ID<11djpdk$167da$2@dont-email.me>
In reply to#197821
On 17/11/2026 3:35 am, Frank Slootweg wrote:
> micky <NONONOmisc07@fmguy.com> wrote:
>> In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
>> Burns <usenet@andyburns.uk> wrote:
>>> micky wrote:
>>>
>>>> I laid my smartphone on the blank part of the laptop to the right of
>>>> the touchpad, not touching any keys. About that time,the screen went
>>>> dark.
>>>>> What's going on?
>>>
>>> Magnets.
>>>
>>> The laptop uses a hall-effect sensor to detect if the lid is closed.
>>
>> Wow. Maybe they should warn people. What if I'd thrown the laptop in the
>> trash!
> 
>    You mean like they should warn people not to put their cat in the
> washing machine?
> 
Hmm!! My car needs a wash .... and I've just gotten a new washing 
machine!! ;-P

-- 
Daniel70

[toc] | [prev] | [next] | [standalone]


#197820

FromFrank Slootweg <this@ddress.is.invalid>
Date2026-11-16 16:28 +0000
Message-ID<11dfeel.of4.1@ID-201911.user.individual.net>
In reply to#197813
micky <NONONOmisc07@fmguy.com> wrote:

[Andy covered the laptop blanking issue.]

> Dell Latitude 5510, Motorola phone with wireless charging capability. 
> ---------------
> 
> Another question.   Turned on the laptop yesterday without a power
> supply, just to look up one little thing, and it said to plug it in
> because I only had 6% of the battery, SIX. I thought it was full.
> Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
> more than an hour it said 100%.  What's going on? 

  If a battery is really going bad, the (non-) 'charging' time between
a few percent and '100%' will be very short, because the '100%' is 100%
of very little capacity left. In other words, the '100%' number is
meaningsless if the battery is bad/nearly_dead.

  For example, I have a laptop from 2003 whose battery 'charges' in a
few minutes from a few percent to '100%' and discharges in seconds,
the thing doesn't even completely boot before the battery gives up.

[...]

[toc] | [prev] | [next] | [standalone]


#197826

FromPaul <nospam@needed.invalid>
Date2026-11-16 14:12 -0500
Message-ID<11dfki5$3r12c$1@dont-email.me>
In reply to#197820
On Mon, 11/16/2026 11:28 AM, Frank Slootweg wrote:
> micky <NONONOmisc07@fmguy.com> wrote:
> 
> [Andy covered the laptop blanking issue.]
> 
>> Dell Latitude 5510, Motorola phone with wireless charging capability. 
>> ---------------
>>
>> Another question.   Turned on the laptop yesterday without a power
>> supply, just to look up one little thing, and it said to plug it in
>> because I only had 6% of the battery, SIX. I thought it was full.
>> Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
>> more than an hour it said 100%.  What's going on? 
> 
>   If a battery is really going bad, the (non-) 'charging' time between
> a few percent and '100%' will be very short, because the '100%' is 100%
> of very little capacity left. In other words, the '100%' number is
> meaningsless if the battery is bad/nearly_dead.
> 
>   For example, I have a laptop from 2003 whose battery 'charges' in a
> few minutes from a few percent to '100%' and discharges in seconds,
> the thing doesn't even completely boot before the battery gives up.
> 
> [...]
> 

I think Micky has bought replacement battery packs before,
so he is familiar with the drill.

With a little luck, the pack will discharge below the
allowed minimum, and then it is not going to charge any more.

   Paul

[toc] | [prev] | [next] | [standalone]


#197840

Frommicky <NONONOmisc07@fmguy.com>
Date2026-11-17 12:55 +0200
Message-ID<ocbofl9bss5mrde0b4ghh1upak4efrtgea@4ax.com>
In reply to#197820
In alt.comp.os.windows-11, on 16 Nov 2026 16:28:02 GMT, Frank Slootweg
<this@ddress.is.invalid> wrote:

>micky <NONONOmisc07@fmguy.com> wrote:
>
>[Andy covered the laptop blanking issue.]
>
>> Dell Latitude 5510, Motorola phone with wireless charging capability. 
>> ---------------
>> 
>> Another question.   Turned on the laptop yesterday without a power
>> supply, just to look up one little thing, and it said to plug it in
>> because I only had 6% of the battery, SIX. I thought it was full.
>> Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
>> more than an hour it said 100%.  What's going on? 
>
>  If a battery is really going bad, the (non-) 'charging' time between
>a few percent and '100%' will be very short, because the '100%' is 100%
>of very little capacity left. In other words, the '100%' number is
>meaningsless if the battery is bad/nearly_dead.

Ugh. I bought this used 1.5 years ago and for some reason I've thought
it had a good battery.  I unplugged it just now and after a couple
minutes it said he battery was good for 6 hours and 17 minutes.  That
sounds great.  

Let me go get infoview and see what it says.  ...Oh, it's nirsoft.  I
have the whole NirLaucher pack so let me look at it. 

Had to unplug it again but Nir says the same thing, 6 hours and 11
minutes. The battery name is Dell 10X1J97 which sounds like the an
original Dell battery, even though the manufacturer is LGC-LGC4.47,
which google ai says is often made for my model Dell. So if not the
original battery it's still the right battery. 

Battery health is 89.3%. 
Number of charge/discharge cycles is 0, which I'm guessing*** means the
battery has never been really low, even though it said 6% to me two days
ago.  Maybe the 6% was the error. It was at 100% the night before, I had
hibernated it -- I'm sure I had** -- and then just started it. 

***No, the sum of partial uses. 0 seems a little low. :-) 

** And even if I'd only slept it, 12 hours of sleep shouldn't put it
down to 6%. 

Current capacity is 60,279 mWH and low battery2 is 6,794.  Big
difference.  6% must have been some kind of fluke? 

>  For example, I have a laptop from 2003 whose battery 'charges' in a
>few minutes from a few percent to '100%' and discharges in seconds,
>the thing doesn't even completely boot before the battery gives up.

Wow. I rarely run it without plugging it in first. Even for the car I
have a power supply. 

>[...]

[toc] | [prev] | [next] | [standalone]


#197828

From...w¡ñ§±¤ñ <winstonmvp@gmail.com>
Date2026-11-16 12:17 -0700
Message-ID<11dfks0$3r4mf$1@dont-email.me>
In reply to#197813
On 11/16/26 4:57 AM, micky wrote:
>
> Another question.   Turned on the laptop yesterday without a power
> supply, just to look up one little thing, and it said to plug it in
> because I only had 6% of the battery, SIX. I thought it was full.
> Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
> more than an hour it said 100%.  What's going on?
> 
> **I have a flashdrive backup of all my email etc, but I'd have to buy
> another laptop to use it.  Then I'd have to bring both laptops home.


<https://www.nirsoft.net/utils/battery_information_view.html>

Scroll down to download the 64 bit version zip file
Open the Zip file and copy or extract the 3 files to a folder of your 
choices.
Select the BatteryInfoView.exe file, rt click, Properties, and unblock 
the file
Run the BatteryInfoView.exe file
Review the results
  - especially the battery's stats
  => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

- the latter will tell you the the full charge capacity as a percent of 
the design capacity.

e.g. this device's full charge capacity is 87.9% of the design capacity.
  - reasonable acceptable for an 8 yr old device


-- 
...w¡ñ§±¤ñ

[toc] | [prev] | [next] | [standalone]


#197829

FromFrank Slootweg <this@ddress.is.invalid>
Date2026-11-16 19:55 +0000
Message-ID<11dfqk8.15e8.1@ID-201911.user.individual.net>
In reply to#197828
...w¡ñ§±¤ñ <winstonmvp@gmail.com> wrote:
> On 11/16/26 4:57 AM, micky wrote:
> >
> > Another question.   Turned on the laptop yesterday without a power
> > supply, just to look up one little thing, and it said to plug it in
> > because I only had 6% of the battery, SIX. I thought it was full.
> > Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
> > more than an hour it said 100%.  What's going on?
> > 
> > **I have a flashdrive backup of all my email etc, but I'd have to buy
> > another laptop to use it.  Then I'd have to bring both laptops home.
> 
> <https://www.nirsoft.net/utils/battery_information_view.html>
> 
> Scroll down to download the 64 bit version zip file
> Open the Zip file and copy or extract the 3 files to a folder of your 
> choices.
> Select the BatteryInfoView.exe file, rt click, Properties, and unblock 
> the file
> Run the BatteryInfoView.exe file
> Review the results
>   - especially the battery's stats
>   => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health
> 
> - the latter will tell you the the full charge capacity as a percent of 
> the design capacity.
> 
> e.g. this device's full charge capacity is 87.9% of the design capacity.
>   - reasonable acceptable for an 8 yr old device

  I also use BatteryInfoView and recommend it, but it does not always
report the 'Designed Capacity' correctly, at least it doesn't for my HP
(15-eh2560nd) laptop (and AFAIR it didn't for our previous HP laptops).

  For example it reports both 'Full Charged Capacity' and 'Designed
Capacity' as 35,063 mWh (~35 Wh) (and hence 'Battery Health' as
'100.0%').

  But the *actual* Design Capacity is 41 Wh, as is documented in its
specs and *is* correctly reported by the 'HP Battery Check' section of
the 'HP Support Assistant' utility.

  So my actual battery health is 'only' 85%.

  My advice: Check if 'Battery Health' is indeed a reasonable
percentage, i.e. *not* 100%. But if it is 100%, then get the *real*
Designed Capacity from the manufacturers specs and divide 'Full Charged
Capacity' by that spec to get the actual battery health.

[toc] | [prev] | [next] | [standalone]


#197835

FromPaul <nospam@needed.invalid>
Date2026-11-16 22:56 -0500
Message-ID<11dgja5$42ls$1@dont-email.me>
In reply to#197829
On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
> ...w¡ñ§±¤ñ <winstonmvp@gmail.com> wrote:
>> On 11/16/26 4:57 AM, micky wrote:
>>>
>>> Another question.   Turned on the laptop yesterday without a power
>>> supply, just to look up one little thing, and it said to plug it in
>>> because I only had 6% of the battery, SIX. I thought it was full.
>>> Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
>>> more than an hour it said 100%.  What's going on?
>>>
>>> **I have a flashdrive backup of all my email etc, but I'd have to buy
>>> another laptop to use it.  Then I'd have to bring both laptops home.
>>
>> <https://www.nirsoft.net/utils/battery_information_view.html>
>>
>> Scroll down to download the 64 bit version zip file
>> Open the Zip file and copy or extract the 3 files to a folder of your 
>> choices.
>> Select the BatteryInfoView.exe file, rt click, Properties, and unblock 
>> the file
>> Run the BatteryInfoView.exe file
>> Review the results
>>   - especially the battery's stats
>>   => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health
>>
>> - the latter will tell you the the full charge capacity as a percent of 
>> the design capacity.
>>
>> e.g. this device's full charge capacity is 87.9% of the design capacity.
>>   - reasonable acceptable for an 8 yr old device
> 
>   I also use BatteryInfoView and recommend it, but it does not always
> report the 'Designed Capacity' correctly, at least it doesn't for my HP
> (15-eh2560nd) laptop (and AFAIR it didn't for our previous HP laptops).
> 
>   For example it reports both 'Full Charged Capacity' and 'Designed
> Capacity' as 35,063 mWh (~35 Wh) (and hence 'Battery Health' as
> '100.0%').
> 
>   But the *actual* Design Capacity is 41 Wh, as is documented in its
> specs and *is* correctly reported by the 'HP Battery Check' section of
> the 'HP Support Assistant' utility.
> 
>   So my actual battery health is 'only' 85%.
> 
>   My advice: Check if 'Battery Health' is indeed a reasonable
> percentage, i.e. *not* 100%. But if it is 100%, then get the *real*
> Designed Capacity from the manufacturers specs and divide 'Full Charged
> Capacity' by that spec to get the actual battery health.
> 

The EEPROM in the battery pack, is used to record charging cycles.
A formula is used to estimate remaining battery life, based on
how many times it has been charged. So some of the information is
static (manufacturing-time info), and some is dynamic (estimates
or a full charge cycle provides a calibration of what is current).

The EEPROM has a serial number, so if you have two battery packs
and you swap them, the laptop reads the EEPROM and determines
which battery pack this is, and any calibrations done are
recorded in that EEPROM. This keeps the information siloed on
a per-pack basis.

For battery packs that snap in, four blades may carry power,
one blade can be a "battery enable" to help avoid shorting
the pack when it is outside the laptop, and some additional
blades are the datapath for the EEPROM.

   Paul

[toc] | [prev] | [next] | [standalone]


#197839

From"Carlos E.R." <robin_listas@es.invalid>
Date2026-11-17 11:48 +0100
Message-ID<t0otsmxmsi.ln2@Telcontar.valinor>
In reply to#197835
On 2026-11-17 04:56, Paul wrote:
> On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
>> ...w¡ñ§±¤ñ <winstonmvp@gmail.com> wrote:
>>> On 11/16/26 4:57 AM, micky wrote:

...

> 
> The EEPROM in the battery pack, is used to record charging cycles.
> A formula is used to estimate remaining battery life, based on
> how many times it has been charged. So some of the information is
> static (manufacturing-time info), and some is dynamic (estimates
> or a full charge cycle provides a calibration of what is current).
> 
> The EEPROM has a serial number, so if you have two battery packs
> and you swap them, the laptop reads the EEPROM and determines
> which battery pack this is, and any calibrations done are
> recorded in that EEPROM. This keeps the information siloed on
> a per-pack basis.
> 
> For battery packs that snap in, four blades may carry power,
> one blade can be a "battery enable" to help avoid shorting
> the pack when it is outside the laptop, and some additional
> blades are the datapath for the EEPROM.
> 
>     Paul


I thought the computer would be accumulating stats and making educated 
predictions. At least on machines where the battery is difficult to 
replace, would make sense.


-- 
Cheers, Carlos.
ES🇪🇸, EU🇪🇺;

[toc] | [prev] | [next] | [standalone]


#197846

FromPaul <nospam@needed.invalid>
Date2026-11-17 09:08 -0500
Message-ID<11dhn54$fp7p$1@dont-email.me>
In reply to#197839
On Tue, 11/17/2026 5:48 AM, Carlos E.R. wrote:
> On 2026-11-17 04:56, Paul wrote:
>> On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
>>> ...w¡ñ§±¤ñ <winstonmvp@gmail.com> wrote:
>>>> On 11/16/26 4:57 AM, micky wrote:
> 
> ...
> 
>>
>> The EEPROM in the battery pack, is used to record charging cycles.
>> A formula is used to estimate remaining battery life, based on
>> how many times it has been charged. So some of the information is
>> static (manufacturing-time info), and some is dynamic (estimates
>> or a full charge cycle provides a calibration of what is current).
>>
>> The EEPROM has a serial number, so if you have two battery packs
>> and you swap them, the laptop reads the EEPROM and determines
>> which battery pack this is, and any calibrations done are
>> recorded in that EEPROM. This keeps the information siloed on
>> a per-pack basis.
>>
>> For battery packs that snap in, four blades may carry power,
>> one blade can be a "battery enable" to help avoid shorting
>> the pack when it is outside the laptop, and some additional
>> blades are the datapath for the EEPROM.
>>
>>     Paul
> 
> 
> I thought the computer would be accumulating stats and making educated predictions. 
> At least on machines where the battery is difficult to replace, would make sense.

The parameters are stored in the EEPROM, so that the parameters accompany
the pack. I found one Youtube video of a 3 cell flat battery, which uses
three pouch cells, and the connector on the pack looks like it has at
least ten contacts. I've seen what looks like lower pin count connectors
joining such packs before, and I doubt I would find an article with details.
But at least for that sample pack, it looks like it has room for a couple
contacts for a serial bus.

Sometimes the contact count, is because the connector current flow rating
is not sufficient for one contact to carry the application current, and
they seem to use a pair of contacts (at least) for VCC and GND. And for
safety, there can be a MOSFET in the pack and a gate terminal for rigging
some sort of "battery-enable" that is only enabled when the pack meets connector.

The pouch cells in a flat battery, give the cell a pretty good max current
capability, while the connector joining it to the laptop is pretty
limiting by comparison.

   Paul

[toc] | [prev] | [next] | [standalone]


#197896

FromDaniel70 <daniel47@nomail.afraid.org>
Date2026-11-18 21:47 +1100
Message-ID<11djvnn$18lpc$1@dont-email.me>
In reply to#197846
On 18/11/2026 1:08 am, Paul wrote:

<Snip>

> Sometimes the contact count, is because the connector current flow rating
> is not sufficient for one contact to carry the application current, and
> they seem to use a pair of contacts (at least) for VCC and GND. And for
> safety, there can be a MOSFET in the pack and a gate terminal for rigging
> some sort of "battery-enable" that is only enabled when the pack meets connector.

The USB Cable for my External (spinning rust) Hard-drive has a USB cable 
that is single-ended at one end and double-ended at other end .... and I 
was guessing that was so that it could be drawing the required current 
to spin the HD via two USB feeds from the Computer.

-- 
Daniel70

[toc] | [prev] | [next] | [standalone]


#197898

FromPaul <nospam@needed.invalid>
Date2026-11-18 06:01 -0500
Message-ID<11dk0io$190uv$1@dont-email.me>
In reply to#197896
On Wed, 11/18/2026 5:47 AM, Daniel70 wrote:
> On 18/11/2026 1:08 am, Paul wrote:
> 
> <Snip>
> 
>> Sometimes the contact count, is because the connector current flow rating
>> is not sufficient for one contact to carry the application current, and
>> they seem to use a pair of contacts (at least) for VCC and GND. And for
>> safety, there can be a MOSFET in the pack and a gate terminal for rigging
>> some sort of "battery-enable" that is only enabled when the pack meets connector.
> 
> The USB Cable for my External (spinning rust) Hard-drive has a USB cable 
> that is single-ended at one end and double-ended at other end .... and I was 
> guessing that was so that it could be drawing the required current to spin 
> the HD via two USB feeds from the Computer.

That's a hydra cable, a "two headed snake" :-)

The 2.5" drive needs 1.0-1.1 amps at 5 volts to spin up.

If using a two headed cable, you try to run it off two stacks.
There can be one fuse, shared by two connectors in a stack,
so one hydra goes in one stack, the other hydra goes in
the second stack. Some desktops have enough connectors for this.

    +---------+       +---------+
    | - - - - |<==    | - - - - |<==     Each stack has a fuse.
    +---------+       +---------+        Use one connector from each stack.
    +---------+       +---------+
    | - - - - |       | - - - - |
    +---------+       +---------+

On a USB3 connector, the fuse on that has a higher rating,
and a single stack might be enough. You
could plug the hydra into both on a single USB3 stack.

    +---------+          A USB3 stack, two blue connectors.
    | - - - - |<==       Can feed Hydra cable off the same stack.
    +---------+
    +---------+
    | - - - - |<==
    +---------+

Some drive housings had a single cable (point to point) plus
a barrel connector for aux power. Some had the hydra cable.
Some don't have a barrel for aux power, and they don't
have the right cable either, and it is up to the owner to
deal with it.

Barrels of fun really. Needs a well stocked cupboard.

   Paul

[toc] | [prev] | [next] | [standalone]


Page 2 of 3 — ← Prev page 1 [2] 3  Next page →

Back to top | Article view | alt.comp.os.windows-10


csiph-web