Groups > sci.electronics.design > #737018

Re: 3D Printers

From	DJ Delorie <dj@delorie.com>
Newsgroups	sci.electronics.design
Subject	Re: 3D Printers
References	(2 earlier) <10ctn05$1671r$1@dont-email.me> <xnjz0rec0h.fsf@delorie.com> <10d1rh2$29aqe$1@dont-email.me> <xnfrbedvhx.fsf@delorie.com> <10d4g4s$2vuea$1@dont-email.me>
Date	2025-10-20 01:50 -0400
Message-ID	<xn7bwqdsuv.fsf@delorie.com> (permalink)

Show all headers | View raw

Don Y <blockedofcourse@foo.invalid> writes:
> Doesn't work when you want 100K of them.  Waiting to see if a hard-tooled
> part will work can be costly.

Prusa prints a lot of the parts that are used to make Prusa printers, on
Prusa printers, so sometimes it does work even when you need 100k of
them.  It depends on how quickly you need those 100k, how often you plan
on iterating the design, and what the capabilities of the final part
are. how expensive the tooling is, etc.

Heck, I once printed an M14 nut for my electric motorcycle conversion
because I didn't happen to have enough on hand and I needed to mount the
battery box for testing.  Then I forgot about it for a couple of months,
during which I got the bike up to a few live tests.  It worked *well
enough* for its purpose (although I did swap it for a metal one when I
realized, duh ;)

But, of course, we each have our own needs...

Back to sci.electronics.design | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-16 18:53 -0700
  Re: 3D Printers Martin Brown <'''newspam'''@nonad.co.uk> - 2025-10-17 09:45 +0100
    Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-17 02:05 -0700
      Re: 3D Printers Martin Brown <'''newspam'''@nonad.co.uk> - 2025-10-17 12:11 +0100
        Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-17 04:53 -0700
  Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-17 13:20 +0100
    Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-17 08:22 -0700
      Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-17 19:24 +0100
        Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-17 13:27 -0700
          Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-18 11:02 +0100
            Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 06:20 -0700
              Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-18 15:36 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 07:58 -0700
              Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 18:01 -0700
                Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-19 08:37 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 01:04 -0700
                Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-19 11:11 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 04:26 -0700
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 04:52 -0700
                Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-19 16:46 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 13:22 -0700
                Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-20 01:33 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 23:44 -0700
                Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-20 14:04 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-20 16:15 -0700
                Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-20 21:07 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-20 18:38 -0700
                Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-21 11:58 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-21 09:47 -0700
                Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-21 13:28 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-22 01:22 -0700
                Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-20 15:19 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-20 07:50 -0700
        Re: 3D Printers albert@spenarnc.xs4all.nl - 2025-10-18 09:17 +0200
      Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-17 20:22 +0100
        Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-17 13:42 -0700
          Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-18 11:25 +0100
            Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 07:39 -0700
              Re: 3D Printers Theo <theom+news@chiark.greenend.org.uk> - 2025-10-18 17:17 +0100
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 09:41 -0700
          Re: 3D Printers antispam@fricas.org (Waldek Hebisch) - 2025-10-18 12:36 +0000
            Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 06:52 -0700
              Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 02:03 -0700
      Re: 3D Printers albert@spenarnc.xs4all.nl - 2025-10-18 09:12 +0200
      Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-19 00:44 -0400
        Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 22:04 -0700
          Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 22:08 -0700
            Re: 3D Printers liz@poppyrecords.invalid.invalid (Liz Tuddenham) - 2025-10-19 10:34 +0100
              Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 03:44 -0700
          Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-20 00:53 -0400
            Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 22:08 -0700
              Re: 3D Printers DJ Delorie <dj@delorie.com> - 2025-10-20 01:50 -0400
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-19 23:59 -0700
                Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-20 00:01 -0700
    Re: 3D Printers john larkin <jl@glen--canyon.com> - 2025-10-17 08:32 -0700
      Re: 3D Printers Bill Sloman <bill.sloman@ieee.org> - 2025-10-19 02:10 +1100
        Re: 3D Printers john larkin <jl@glen--canyon.com> - 2025-10-18 09:09 -0700
          Re: 3D Printers Lasse Langwadt <llc@fonz.dk> - 2025-10-19 03:46 +0200
            Re: 3D Printers john larkin <jl@glen--canyon.com> - 2025-10-18 20:11 -0700
            Re: 3D Printers liz@poppyrecords.invalid.invalid (Liz Tuddenham) - 2025-10-19 10:34 +0100
              Re: 3D Printers Lasse Langwadt <llc@fonz.dk> - 2025-10-19 14:41 +0200
                Re: 3D Printers liz@poppyrecords.invalid.invalid (Liz Tuddenham) - 2025-10-19 15:29 +0100
                Re: 3D Printers Lasse Langwadt <llc@fonz.dk> - 2025-10-20 17:35 +0200
                Re: 3D Printers liz@poppyrecords.invalid.invalid (Liz Tuddenham) - 2025-10-20 17:22 +0100
                Re: 3D Printers Lasse Langwadt <llc@fonz.dk> - 2025-10-21 01:17 +0200
          Re: 3D Printers Bill Sloman <bill.sloman@ieee.org> - 2025-10-19 16:32 +1100
      Re: 3D Printers Lasse Langwadt <llc@fonz.dk> - 2025-10-19 03:41 +0200
        Re: 3D Printers Don Y <blockedofcourse@foo.invalid> - 2025-10-18 20:38 -0700

csiph-web