Re: !Boot issue with Reporter

From	Chris Hughes <news13@noonehere.co.uk>
Newsgroups	comp.sys.acorn.misc
Subject	Re: !Boot issue with Reporter
Date	2025-07-28 12:15 +0100
Organization	A noiseless patient Spider
Message-ID	<d44879435c.chris@mytardis> (permalink)
References	<5c4304a796basura@invalid.addr.uk> <5c43116402News03@avisoft.f9.co.uk> <5c43275f43basura@invalid.addr.uk>

Show all headers | View raw

In message <5c43275f43basura@invalid.addr.uk>
          Richard Ashbery <basura@invalid.addr.uk> wrote:

> In article <5c43116402News03@avisoft.f9.co.uk>, Martin
> <News03@avisoft.f9.co.uk> wrote:
>> In article <5c4304a796basura@invalid.addr.uk>, Richard Ashbery
>>    <basura@invalid.addr.uk> wrote:
>>> Testing the !Boot program with !Reporter on ARMX6 fails to run
>>> into the desktop at its default resolution (1920 x 1080). It
>>> reports an error: Filing system SCSI: must be given a filename
>>> 640.

>>> SSD check with !DiscKnight states disc is OK.

>>> Any thoughts as to what this means please?

>>> !Reporter, V2.74 with RISCOS 5.31

>> It means that the command issued just before the error caused the
>> error - possibly because a variable has been used which is not set
>> correctly.  What is that command? You may then have to work out
>> what issued that command wrongly, and why.

>> If no commands are Reported at all, then use Reporter Menu ->
>> Config -> Options  and select Report OS Commands executed and with
>> Source, and ensure Obey Only is NOT selected.  Then click Save, and
>> the next re-boot should list lots of commands.

> !Reporter reports that !RevertMode in Boot.Tasks may be causing the
> error. When its !RunImage is run I get the same error...
> SCSI: must be given a filename 640.
> I've temporarily moved !RevertMode to a separate filer window. On
> re-running reporter I get another message "Expansion too complex" and
> seems to occur after attempting to load Pinboard2 where there are
> numerous errors. It might be worth reloading Pinboard2.

Which version of Pinboard2 are you using the current version is 2.07 (28 
Feb 2025)?

I have !RevertMode in the normal location and Pinbaord2 running without 
any errors.

-- 
Chris Hughes

Back to comp.sys.acorn.misc | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

!Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-27 15:01 +0100
  Re: !Boot issue with Reporter Jean-Michel <jmc.bruck@orange.fr> - 2025-07-27 17:56 +0200
  Re: !Boot issue with Reporter Martin <News03@avisoft.f9.co.uk> - 2025-07-27 17:20 +0100
    Re: !Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-27 21:20 +0100
      Re: !Boot issue with Reporter Jean-Michel <jmc.bruck@orange.fr> - 2025-07-28 12:49 +0200
        Re: !Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-28 20:48 +0100
      Re: !Boot issue with Reporter Chris Hughes <news13@noonehere.co.uk> - 2025-07-28 12:15 +0100
        Re: !Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-28 20:40 +0100
      Re: !Boot issue with Reporter Martin <News03@avisoft.f9.co.uk> - 2025-07-28 17:25 +0100
        Re: !Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-28 20:52 +0100
    Re: !Boot issue with Reporter Richard Ashbery <basura@invalid.addr.uk> - 2025-07-28 14:59 +0100
      Re: !Boot issue with Reporter Chris Hughes <news13@noonehere.co.uk> - 2025-07-28 17:42 +0100
        Re: !Boot issue with Reporter Steve Fryatt <news@stevefryatt.org.uk> - 2025-07-28 18:06 +0100

csiph-web