Groups | Search | Server Info | Login | Register
Groups > alt.os.linux.ubuntu > #212459
| From | George Garth <none@nowhere.com> |
|---|---|
| Newsgroups | alt.os.linux.ubuntu |
| Subject | Re: USP monitoring and shutdown software for Cyberpower 550VA? |
| Date | 2026-03-19 17:38 -0400 |
| Organization | A noiseless patient Spider |
| Message-ID | <10phqdg$12dbh$1@dont-email.me> (permalink) |
| References | (2 earlier) <10pgr5d$n9av$1@dont-email.me> <10ph7g2$rqgp$1@dont-email.me> <10phae3$s8co$1@dont-email.me> <10phbn5$teu8$1@dont-email.me> <10phdqo$u44h$1@dont-email.me> |
On 3/19/26 2:04 PM, George Garth wrote: > On 3/19/26 1:28 PM, Jonathan N. Little wrote: >> George Garth wrote: >> >> <snip> >> >>> >>> Ok, thanks a bunch! Finally able to get some software response. >>> Initially I tried just clicking on the deb and installed from the >>> software center, but wasn't getting any of the above. >>> >>> I recently had to replace the power supply so it's about double what the >>> UPS is supposed to handle. After about 2 min, batt had dropped to 35%, >>> so will have to be sure and shut down asap if power fails. >> >> The power supply won't matter it is the power load your system draws, >> most of the library workstations load is only about 6-10% load >> >> Properties: >> Model Name................... CP1500PFCLCDa >> Firmware Number.............. CR01802CBH11 >> Rating Voltage............... 120 V >> Rating Power................. 1000 Watt(1500 VA) >> >> Current UPS status: >> State........................ Normal >> Power Supply by.............. Utility Power >> Utility Voltage.............. 122 V >> Output Voltage............... 122 V >> Battery Capacity............. 100 % >> Remaining Runtime............ 92 min. >> Load......................... 60 Watt(6 %) >> Line Interaction............. None >> Test Result.................. Passed at 2022/08/06 >> 22:46:44 >> Last Power Event............. Blackout at 2026/03/16 >> 19:19:09 for 12 sec. >> >> But this new Window 11 sucker I just build is 26% Load for 35 mins >> runtime. If your battery dropped to 35% in just 2 minutes and you load >> is 30% or less then you need new batteries. I find MightyMax one on eBay >> or Amazon are good. Just bought a pair of 12V 9Ah SLAs for $45 >> >> Youtube has vids on how to swap out batteries. >> >>> >>> Thanks again for your help. I will print out the instructions and keep >>> them handy nearby. >> > > I'll run the test again later and check the load, but it's going to be a > good bit more than 30% I think. > > Just a couple of issues. I noticed upon rebooting when checking status, only the UPS properties were shown and current UPS status was disconnected. Only when I removed and plugged in the USB cable from the UPS did current UPS status show info. I also don't see "load" and "line interaction" parameters like in yours above as they are missing.
Back to alt.os.linux.ubuntu | Previous | Next — Previous in thread | Next in thread | Find similar
USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-18 07:37 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-18 09:11 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 08:15 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 08:45 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 12:16 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 13:06 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 13:28 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 14:04 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 17:38 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 21:45 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-19 22:38 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 03:16 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-20 04:55 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 05:58 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 03:19 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-20 08:27 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 16:28 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-25 16:32 -0400
csiph-web