Groups | Search | Server Info | Login | Register
Groups > alt.os.linux.ubuntu > #212458
| From | George Garth <none@nowhere.com> |
|---|---|
| Newsgroups | alt.os.linux.ubuntu |
| Subject | Re: USP monitoring and shutdown software for Cyberpower 550VA? |
| Date | 2026-03-19 14:04 -0400 |
| Organization | A noiseless patient Spider |
| Message-ID | <10phdqo$u44h$1@dont-email.me> (permalink) |
| References | (1 earlier) <10pgpce$mn2b$1@dont-email.me> <10pgr5d$n9av$1@dont-email.me> <10ph7g2$rqgp$1@dont-email.me> <10phae3$s8co$1@dont-email.me> <10phbn5$teu8$1@dont-email.me> |
On 3/19/26 1:28 PM, Jonathan N. Little wrote: > George Garth wrote: > > <snip> > >> >> Ok, thanks a bunch! Finally able to get some software response. >> Initially I tried just clicking on the deb and installed from the >> software center, but wasn't getting any of the above. >> >> I recently had to replace the power supply so it's about double what the >> UPS is supposed to handle. After about 2 min, batt had dropped to 35%, >> so will have to be sure and shut down asap if power fails. > > The power supply won't matter it is the power load your system draws, > most of the library workstations load is only about 6-10% load > > Properties: > Model Name................... CP1500PFCLCDa > Firmware Number.............. CR01802CBH11 > Rating Voltage............... 120 V > Rating Power................. 1000 Watt(1500 VA) > > Current UPS status: > State........................ Normal > Power Supply by.............. Utility Power > Utility Voltage.............. 122 V > Output Voltage............... 122 V > Battery Capacity............. 100 % > Remaining Runtime............ 92 min. > Load......................... 60 Watt(6 %) > Line Interaction............. None > Test Result.................. Passed at 2022/08/06 22:46:44 > Last Power Event............. Blackout at 2026/03/16 > 19:19:09 for 12 sec. > > But this new Window 11 sucker I just build is 26% Load for 35 mins > runtime. If your battery dropped to 35% in just 2 minutes and you load > is 30% or less then you need new batteries. I find MightyMax one on eBay > or Amazon are good. Just bought a pair of 12V 9Ah SLAs for $45 > > Youtube has vids on how to swap out batteries. > >> >> Thanks again for your help. I will print out the instructions and keep >> them handy nearby. > I'll run the test again later and check the load, but it's going to be a good bit more than 30% I think.
Back to alt.os.linux.ubuntu | Previous | Next — Previous in thread | Next in thread | Find similar
USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-18 07:37 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-18 09:11 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 08:15 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 08:45 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 12:16 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 13:06 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 13:28 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 14:04 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-19 17:38 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-19 21:45 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-19 22:38 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 03:16 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? Paul <nospam@needed.invalid> - 2026-03-20 04:55 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 05:58 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 03:19 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? "Jonathan N. Little" <lws4art@gmail.com> - 2026-03-20 08:27 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-20 16:28 -0400
Re: USP monitoring and shutdown software for Cyberpower 550VA? George Garth <none@nowhere.com> - 2026-03-25 16:32 -0400
csiph-web