Groups > sci.electronics.components > #6503

Re: Help identifying connector

From	Dan Purgert <dan@djph.net>
Newsgroups	sci.electronics.components, sci.electronics.design
Subject	Re: Help identifying connector
Followup-To	sci.electronics.components
Date	2022-07-26 11:39 +0000
Organization	A noiseless patient Spider
Message-ID	<slrntdvkje.hjh.dan@djph.net> (permalink)
References	<UdLDK.54141$mY1.6558@fx01.iad> <jka0tnFej4dU1@mid.individual.net>

Cross-posted to 2 groups.

Followups directed to: sci.electronics.components

Show all headers | View raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

["Followup-To:" header set to sci.electronics.components.]
ChrisND@privacy.net wrote:
> On 26/07/2022 06:47, Mike Mocha wrote:
>> 
>> Hey all,
>> 
>> I need some help to identify the manufacturer of the "DIAG" connector
>> shown in the imgur link.  I've done a lot of searching on Digikey, Mouser,
>> etc, and I'm not having any luck.  The pin pitch looks to be about 2.5
>> mm.  The inside dimensions are about 7.75 mm by 6.1 mm.  These pins wire
>> to a serial port for use with a terminal emulator.  If someone could just
>> give a clue on the OEM I can do the rest.  Thanks for any help!
>> 
>> 
>> https://imgur.com/a/9yGEPXR
>
> If you end up stuck, I would try three sections off a standard double 
> 2.5mm pin header...
> Chris

looks like a pretty "standard" shrouded 2x3-pin header.  Might be
intended to plug into a keyed IDC connector for a ribbon cable?


-----BEGIN PGP SIGNATURE-----
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=nKnE
-----END PGP SIGNATURE-----

-- 
|_|O|_|
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: DDAB 23FB 19FA 7D85 1CC1  E067 6D65 70E5 4CE7 2860

Back to sci.electronics.components | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Help identifying connector Mike Mocha <mocha@mailexcite.com> - 2022-07-26 05:47 +0000
  Re: Help identifying connector "ChrisND@privacy.net" <chrisnd@privacy.net> - 2022-07-26 12:19 +0100
    Re: Help identifying connector Dan Purgert <dan@djph.net> - 2022-07-26 11:39 +0000
    Re: Help identifying connector Mike Mocha <mocha@mailexcite.com> - 2022-07-26 18:10 +0000

csiph-web