Groups > sci.electronics.components > #6251

Re: I2C relay boards.

From	David Lesher <wb8foz@panix.com>
Newsgroups	sci.electronics.design, sci.electronics.components
Subject	Re: I2C relay boards.
Date	2017-10-28 18:23 +0000
Organization	NRK Clinic for habitual NetNews Abusers - Beltway Annex
Message-ID	<ot2hv9$4nc$1@reader2.panix.com> (permalink)
References	(3 earlier) <dOoIB.62603$4X4.49907@fx01.iad> <osvk7d$9n6$1@reader2.panix.com> <WFKIB.46124$K_2.4439@fx07.iad> <ot135b$9dt$2@reader2.panix.com> <OdZIB.10964$gV2.592@fx29.iad>

Cross-posted to 2 groups.

Show all headers | View raw

Michael A Terrell <mike.terrell@earthlink.net> writes:

>> I need some 10 position one-row headers but will likely use
>> two-row 20's and ignore the other. I do plan to plug them end
>> to end but will need to hold them.  Thinking a slotted /______\
>> piece of soft plastic that in turn is mounted to the DIN rail.

>Yes, ribbon cable. Peel off as many conductors as you need. The color 
>code repeats every ten conductors.

>T1-3X-40pcs-20cm-Male-To-Male-Female-Dupont-Wire-Jumper-Cable-Arduino-Breadboard

>https://www.ebay.com/itm/231708399395


I'd rather use an IDC connector that matches the headers; less
chance something gets loose/ is misconnected.
-- 
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

Back to sci.electronics.components | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-26 00:33 +0000
  Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-26 06:22 -0400
    Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-26 15:35 +0000
      Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-26 13:19 -0400
        Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-27 15:43 +0000
          Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-27 14:12 -0400
            Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-28 05:04 +0000
              Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-28 06:46 -0400
                Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-28 18:23 +0000
                Re: I2C relay boards. rickman <gnuarm@gmail.com> - 2017-10-28 14:27 -0400
                Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-28 18:38 +0000
                Re: I2C relay boards. rickman <gnuarm@gmail.com> - 2017-10-28 14:51 -0400
                Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-28 15:27 -0400
                Re: I2C relay boards. rickman <gnuarm@gmail.com> - 2017-10-28 17:01 -0400
                Re: I2C relay boards. Michael A Terrell <mike.terrell@earthlink.net> - 2017-10-28 23:43 -0400
      Re: I2C relay boards. rickman <gnuarm@gmail.com> - 2017-10-27 00:54 -0400
        Re: I2C relay boards. David Lesher <wb8foz@panix.com> - 2017-10-28 04:58 +0000

csiph-web