Groups > sci.electronics.components > #5683

Re: DIN rails and diodes

From	"Rheilly Phoull" <rheilly@bigslong.com>
Newsgroups	sci.electronics.components, sci.electronics.design, sci.electronics.misc, alt.engineering.electrical
References	<0001HW.1B45ABFD012943F311A4B83CF@news.eternal-september.org>
Subject	Re: DIN rails and diodes
Date	2015-07-03 12:35 +0800
Message-ID	<I7CdnaQu-dqDjAvInZ2dnUU7-cudnZ2d@westnet.com.au> (permalink)

Cross-posted to 4 groups.

Show all headers | View raw

"DaveC"  wrote in message 
news:0001HW.1B45ABFD012943F311A4B83CF@news.eternal-september.org...

I am building an industrial sensor system for warehouse and need to isolate
some inputs using blocking diodes (simple rectifiers will suffice).


To do this in the DIN rail configuration will take 2 terminal blocks, one 
for
each connection to the diode.

It would be so much easier if there were single-position DIN-rail diodes 
that
just snap onto the rail with a screw- or push-terminal on each end. Or a
DIN-rail blank (dunno what to call it): a pair of screw terminals on the top
for attaching the diode, and the usual screw- or push-terminals for wiring 
it
into the circuit.

Surely one of these must exist… but searching turns up nothing.

Ideas?

Thanks.

I see some multiple (x8) units on ebay, mebbe an enquiry might turn up 
smaller units??

Back to sci.electronics.components | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

DIN rails and diodes DaveC <not@home.cow> - 2015-07-02 10:27 -0700
  Re: DIN rails and diodes "Rheilly Phoull" <rheilly@bigslong.com> - 2015-07-03 12:35 +0800
  Re: DIN rails and diodes Techman <junkemail@bogus.com> - 2015-07-03 13:01 +0800
  Re: DIN rails and diodes Tom Kupp <tjkupp@gmail.com> - 2015-07-03 09:31 -0400
    Re: DIN rails and diodes Techman <junkemail@bogus.com> - 2015-07-03 21:57 +0800
  Re: DIN rails and diodes Techman <junkemail@bogus.com> - 2015-07-03 21:56 +0800
  Re: DIN rails and diodes mroberds@att.net - 2015-07-19 21:24 +0000

csiph-web