Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.lang.python > #65929

Re: Newcomer Help

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

No, Gisle Vanem - I do NOT get the picture. First of all you did NOT answer my question. And this is the way I always have - and the people I typically respond to - respond to emails. 


Check the end - if that is where you expect me to enter any additional info. 

----- Original Message -----

From: "Gisle Vanem" <gvanem@yahoo.no> 
To: "Walter Hughey" <wkhughey@gmail.com> 
Cc: python-list@python.org 
Sent: Monday, February 10, 2014 4:13:44 PM 
Subject: Re: Newcomer Help 

"Walter Hughey" <wkhughey@gmail.com> wrote: 

> Thank you for your reply. One quick question, when 
> I reply should it be replay to all or to the person who sent the emial? 

When replying, the most important thing to remember is... order. 

A: Because it messes up the order in which people normally read text. 
Q: Why is it such a bad thing? 
A: Top-posting. 
Q: What is the most annoying thing in e-mail? 

Get the picture now newcomer? 

--gv 

------ this crap came from you --------- 


> 
> 
> Apple does install a version of Python, normally a somewhat older version. My computer has 2.5 and 2.6 installed and I have opened 
> it and inserted code that works. I do need a way to write the code, test it, and then save a copy to turn in for the assignment. I 
> was not aware that a normal text editor would work. I shall definitely look at that later today. 
> 
> 
> Walter 
> ----- Original Message ----- 
> 
> From: "Rustom Mody" <rustompmody@gmail.com> 
> To: python-list@python.org 
> Sent: Monday, February 10, 2014 11:07:14 AM 
> Subject: Re: Newcomer Help 
> 
> On Monday, February 10, 2014 9:40:22 PM UTC+5:30, Walter Hughey wrote: 
>> I am new to Python programming, actually new to any programming language. I sent the email below to the "python...@python.org a 
>> few days ago. So far I have not seen a reply, actually, I have not seen anything from pythonmac in any emails although I am 
>> supposed to be a member. 
>> 
>> 
>> I don't know if I am sending these to the correct place or if I am not receiving emails from the pythonmac list. I would 
>> appreciate any assistance either in how do I get to the pythonmac list or answers to the issue below. I went to the pythonmac 
>> list because I am trying to run Python 3.3 on a Mac computer. 
>> 
>> 
>> Thank you, 
>> 
>> 
>> Walter 
>> 
>> From: "Walter Hughey" <wkhu...@gmail.com> 
>> To: python...@python.org 
>> Sent: Friday, February 7, 2014 11:54:49 AM 
>> Subject: Newcomer Help 
>> 
>> 
>> Greetings, 
>> I am new at Python programming, technically a newbie at writing programming code. I have been involved in the maintenance of 
>> computers for several years and have decided to increase my knowledge and experience. I am taking a course that - although not a 
>> programming course - does require writing of code. I am trying to use Python to write the code. 
>> 
>> I use a Mac computer and the first issue is getting working with Python. The computer I currently use is running Mac OS X 10.6.8, 
>> Intel Core i5 Processor, with 4GB RAM. It has Python 2.3, 2.5, and 2.6 installed by Apple. I have added Python 3.3, the version 
>> our Professor recommended. I have checked out the Python installed by Apple and can enter in code and it works, but I need to 
>> create a file, run it, and then provide it for the Professor to grade and I don't know how with the Apple installed version. 
>> 
>> While reading about Python, I saw comments about the note concerning outdated software: If you are using Python from a python.org 
>> 64-bit/32-bit Python installer for Mac OS X 10.6 and later, 
>> you should only use IDLE or tkinter with an updated 
>> third-party Tcl/Tk 8.5, like 
>> ActiveTcl 8.5 
>> installed. 
>> 
>> I located, downloaded and installed the recommended version of ActiveTcl 8.5.15.0. When I open Idle, I see a warning that "The 
>> version of Tcl/Tk (8.5.7) in use may be unstable." I received this warning both before and after installing the software above. I 
>> open Idle, choose "New File" then most often the computer will freeze, Idle does nothing, cannot enter text into the text box, 
>> cannot close the application either with the red circle or by selecting Idle>Close Idle. As often as that, Idle freezes as soon 
>> as I open new file, and I cannot close without resorting to Force Quit. 
>> 
>> I have removed and re-installed Python after downloading and installing the Tcl/Tk software and it does not help. I have seen 
>> this work fine on a Mac running Mac OS X 10.8.3. I really just need to get this working on the older version. 
>> 
>> A am not only new to Python, I am new on this list and hope I have started my stay here in the correct manner! 
>> 
> 
> Hi! You have started on a clear note and are welcome here. 
> I dont know anything about macs so hopefully someone else will give you 
> more specific answers. 
> 
> However can you check that python interpreter runs in a shell, and that 
> after starting it if you type say: 
> 2 + 3 RETURN 
> you get 5 
> 
> If that is the case you can still develop the way most python programmers 
> develop, viz 
> Write your code in a normal text editor 
> Load it into the interpreter 
> Check it 
> Go back to the editor and continue writing/correcting the code 
> -- 
> https://mail.python.org/mailman/listinfo/python-list 
> 
> 

I suppose what you mean by "top posting" is replying to an email by entering a reply at the top when according to your policies and procedures - a person should reply at the bottom of the email - like this. IF/WHEN I am on this site, I shall do my utmost best to change the way I and the people I normally work with to reply at the bottom, Assuming Gisle Vanem this is what you mean and what you want. 


This "newcomer" apologizes for ------ this crap came from you ---------. 


I hope I have not totally destroyed all of everybody's systems with my inappropriate and thoughtless disregard for the sanctity of this site. May be it be best I not reply/ask for help/or in any way be involved in this site. 
-------------------------------------------------------------------------------- 


> -- 
> https://mail.python.org/mailman/listinfo/python-list 
> 

Back to comp.lang.python | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: Newcomer Help Walter Hughey <wkhughey@gmail.com> - 2014-02-11 11:49 -0500
  Re: Newcomer Help Rustom Mody <rustompmody@gmail.com> - 2014-02-11 19:01 -0800
    Re: Newcomer Help Ben Finney <ben+python@benfinney.id.au> - 2014-02-12 15:14 +1100
      Re: Newcomer Help Grant Edwards <invalid@invalid.invalid> - 2014-02-12 15:17 +0000
        Re: Newcomer Help Chris Angelico <rosuav@gmail.com> - 2014-02-13 04:56 +1100
        Re: Newcomer Help Tim Delaney <timothy.c.delaney@gmail.com> - 2014-02-13 08:07 +1100
        Re: Newcomer Help Chris Angelico <rosuav@gmail.com> - 2014-02-13 08:22 +1100

csiph-web