Re: In Forth, is it valid or safe to use the value of 'I' after LOOP?

Newsgroups	comp.lang.forth
From	Albert van der Horst <albert@spenarnc.xs4all.nl>
Subject	Re: In Forth, is it valid or safe to use the value of 'I' after LOOP?
Date	2012-03-12 11:00 +0000
Message-ID	<m0rql8.2hr@spenarnc.xs4all.nl> (permalink)
Organization	Dutch Forth Workshop
References	<jj3ats$bsb$1@speranza.aioe.org> <jjgq7n$4j0$1@speranza.aioe.org> <9s3lhiFmbrU1@mid.individual.net> <db9d125e-38dd-4d63-a225-022435ac49ca@v7g2000yqb.googlegroups.com>

Show all headers | View raw

In article <db9d125e-38dd-4d63-a225-022435ac49ca@v7g2000yqb.googlegroups.com>,
BruceMcF  <agila61@netscape.net> wrote:
>On Mar 11, 8:51=A0am, "Paul E. Bennett" <Paul_E.Benn...@topmail.co.uk>
>wrote:
>> I would tend to suggest that considering any word with three nested
>> DO...LOOP's hints at lack of proper factoring.
>
>If you are iterating over a three dimensional subspace of a three
>dimensional array, it could seem to be appropriate ~ but single
>dimensional vectors and two dimensional arrays are far more common.
>
>With a time dimension, I normally prefer a time vector of pointers to
>the data at each time increment, so even with data in a three
>dimensional space, I can't see why one would need more than three
>dimensions.

A few times I had a three-dimensional search space in an Euler problem.
That is hard to handle with separate words.

K can be defined, if you are willing to look inside your Forth.

Hack it out like this:
: test 10 0 DO 1 0 DO 1 0 DO RSP@ 100 DUMP LOOP LOOP LOOP ;

My result:

: K   RSP@ 7 CELLS + @ ;   \ ciforth specific.

or
: K FORTH "RSP@ 6 CELLS + @" EVALUATE PREVIOUS ; IMMEDIATE

Groetjes Albert

--
-- 
Albert van der Horst, UTRECHT,THE NETHERLANDS
Economic growth -- being exponential -- ultimately falters.
albert@spe&ar&c.xs4all.nl &=n http://home.hccnet.nl/a.w.m.van.der.horst

Back to comp.lang.forth | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-05 16:23 -0500
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-05 12:11 -1000
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-05 13:44 -1000
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 11:26 +0000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-06 05:42 -0800
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 14:51 +0000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-06 10:17 -0600
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 16:49 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-06 11:56 -0600
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 18:07 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-07 04:14 -0600
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 15:56 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 11:23 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:26 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 12:28 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 13:36 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 09:18 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-06 20:14 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 08:22 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-07 10:20 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 11:11 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-07 19:07 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-08 10:11 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 09:36 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:01 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Alex McDonald <blog@rivadpm.com> - 2012-03-06 13:13 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:04 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-12 13:40 -0700
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-07 10:15 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 10:33 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-07 17:16 -1000
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 11:18 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-12 08:01 -1000
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 18:59 -0700
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-16 20:36 +0100
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 13:33 -0500
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 09:07 -1000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 18:20 -0500
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 14:07 -1000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? John Passaniti <john.passaniti@gmail.com> - 2012-03-06 16:53 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 19:26 -1000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-10 19:04 -0500
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-10 18:44 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-11 17:06 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:01 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-03-11 12:51 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 14:04 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-11 14:41 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 05:16 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-12 08:06 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-03-11 21:55 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:17 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-12 11:00 +0000
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-11 17:27 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-11 14:12 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-11 21:48 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-11 14:24 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:09 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-11 17:34 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-11 13:18 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:32 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-13 13:18 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-19 03:36 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:37 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-16 05:31 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-19 03:38 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-19 11:35 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-16 20:39 +0100
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-12 12:50 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:27 -0700
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 08:16 -0800
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:09 -0700
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-05 14:23 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-05 17:42 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-06 09:36 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-08 10:41 +0000
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-08 05:38 -0800
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-09 10:32 -0800
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-12 19:26 -0700
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-13 04:15 -0400
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-12 01:11 +0100
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-12 19:41 -0400
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-12 16:46 -1000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-12 21:17 -0700
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-13 05:01 -0400
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-13 03:06 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-13 12:32 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-13 14:01 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-14 11:47 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 22:13 +0100
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-14 03:39 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-14 06:54 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-14 16:39 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-15 10:49 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Alex McDonald <blog@rivadpm.com> - 2012-03-14 08:53 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 17:01 +0100
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? George Hubert <georgeahubert@yahoo.co.uk> - 2012-03-14 11:21 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 19:25 +0100
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-14 16:37 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-15 04:28 -0400
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "David N. Williams" <williams@umich.edu> - 2012-03-13 16:19 -0400
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-14 20:13 -0400

csiph-web