Re: In Forth, is it valid or safe to use the value of 'I' after LOOP?

From	hwfwguy@gmail.com
Newsgroups	comp.lang.forth
Subject	Re: In Forth, is it valid or safe to use the value of 'I' after LOOP?
Date	2012-03-09 10:32 -0800
Organization	http://groups.google.com
Message-ID	<12556159.27.1331317954735.JavaMail.geo-discussion-forums@ynjk1> (permalink)
References	<jj3ats$bsb$1@speranza.aioe.org> <92b7f2c8-fc9c-4150-805e-b29939f6f2ff@x7g2000pbi.googlegroups.com>

Show all headers | View raw

On Thursday, March 8, 2012 6:38:06 AM UTC-7, Hugh Aguilar wrote:
> Straight Forth will just
> have general-purpose local variables and BEGIN loops.
> 
What would be the equivalent of "12 0 DO I . 3 +LOOP"?

> If people want to have a variable number of parameters on the stack
> (usually with a zero underneath), they can just put that stuff into a
> linked-list rather than on the stack. 

The "variable number of parameters" stack is what makes Forth Forth.

I agree that stack noise is undesirable. It will make your head hurt unless you're used to it. However, stack noise should be a small part of the application. The idea is to work toward an application that contains minimal stackrobatics.

The architecture of Forth and the semantics of each standard word were evaluated and reworked as a continuous process over decades of real world use. You can make your own "standard" but it won't go through that furnace of refinement.

Back to comp.lang.forth | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-05 16:23 -0500
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-05 12:11 -1000
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-05 13:44 -1000
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 11:26 +0000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-06 05:42 -0800
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 14:51 +0000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-06 10:17 -0600
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 16:49 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-06 11:56 -0600
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-06 18:07 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-07 04:14 -0600
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 15:56 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 11:23 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:26 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 12:28 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 13:36 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 09:18 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-06 20:14 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 08:22 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-07 10:20 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 11:11 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-07 19:07 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-08 10:11 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 09:36 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:01 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Alex McDonald <blog@rivadpm.com> - 2012-03-06 13:13 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 16:04 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-12 13:40 -0700
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-07 10:15 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 10:33 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-07 17:16 -1000
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2012-03-12 11:18 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-12 08:01 -1000
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 18:59 -0700
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-16 20:36 +0100
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 13:33 -0500
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 09:07 -1000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-06 18:20 -0500
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 14:07 -1000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? John Passaniti <john.passaniti@gmail.com> - 2012-03-06 16:53 -0800
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-06 19:26 -1000
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-10 19:04 -0500
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-10 18:44 -0800
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-11 17:06 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:01 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-03-11 12:51 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 14:04 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-11 14:41 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-12 05:16 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-12 08:06 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-03-11 21:55 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:17 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-12 11:00 +0000
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-11 17:27 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-11 14:12 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-11 21:48 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-11 14:24 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:09 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-11 17:34 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-11 13:18 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-11 17:32 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Josh Grams <josh@qualdan.com> - 2012-03-13 13:18 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-19 03:36 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:37 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-16 05:31 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-19 03:38 -0400
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-19 11:35 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-16 20:39 +0100
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-12 12:50 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:27 -0700
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-07 08:16 -0800
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? jacko <jackokring@gmail.com> - 2012-03-15 19:09 -0700
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? rickman <gnuarm@gmail.com> - 2012-03-05 14:23 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? BruceMcF <agila61@netscape.net> - 2012-03-05 17:42 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-06 09:36 -0800
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-08 10:41 +0000
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-08 05:38 -0800
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? hwfwguy@gmail.com - 2012-03-09 10:32 -0800
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-12 19:26 -0700
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-13 04:15 -0400
  Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Coos Haak <chforth@hccnet.nl> - 2012-03-12 01:11 +0100
    Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-12 19:41 -0400
      Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-12 16:46 -1000
        Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-12 21:17 -0700
          Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-13 05:01 -0400
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-13 03:06 -0700
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-13 12:32 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Mark Wills <markrobertwills@yahoo.co.uk> - 2012-03-13 14:01 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Paul Rubin <no.email@nospam.invalid> - 2012-03-14 11:47 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 22:13 +0100
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2012-03-14 03:39 -0500
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Elizabeth D. Rather" <erather@forth.com> - 2012-03-14 06:54 -1000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-14 16:39 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-15 10:49 +0000
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Alex McDonald <blog@rivadpm.com> - 2012-03-14 08:53 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 17:01 +0100
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? George Hubert <georgeahubert@yahoo.co.uk> - 2012-03-14 11:21 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "A. K." <akk@nospam.org> - 2012-03-14 19:25 +0100
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? Hugh Aguilar <hughaguilar96@yahoo.com> - 2012-03-14 16:37 -0700
                Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-15 04:28 -0400
            Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "David N. Williams" <williams@umich.edu> - 2012-03-13 16:19 -0400
              Re: In Forth, is it valid or safe to use the value of 'I' after LOOP? "Rod Pemberton" <do_not_have@noavailemail.cmm> - 2012-03-14 20:13 -0400

csiph-web