Groups | Search | Server Info | Login | Register
| From | "DoN. Nichols" <BPdnicholsBP@d-and-d.com> |
|---|---|
| Newsgroups | comp.sys.3b1 |
| Subject | Re: Reconstructing an AT&T 7300 |
| Date | 2015-07-12 01:06 +0000 |
| Organization | D and D Data |
| Message-ID | <slrnmq3fbf.5au.BPdnicholsBP@Katana.d-and-d.com> (permalink) |
| References | <3b006148-d6eb-4d78-bd6a-4adad7ee8516@googlegroups.com> <185a5a23-9679-48ce-beaf-f47f4a5460fb@googlegroups.com> |
On 2015-07-07, vlaarom@gmail.com <vlaarom@gmail.com> wrote:
> I have successfully booted from diagnostic floppy.
Congratulations on your progress.
> I have got st-251-0 HDD. I can't format this disk(error: Can't write
> the new VHB : Response = 10).
I don't know the specific meaning of 10 as an error code. It
might be in the WD1010 HD controller chip, or it may be in the driver in
the kernel.
> But i can successfully low format this st-251-0 on 286 PC(WD1003-WA2
> ISA board) with seagate disk utility 3.0.
O.K. The disk works, at least. Did you find an entry for that
disk in the diagnostic floppy? If not -- perhaps try the alternate
diagnostic floppy, which is used with a newer kernel and with systems
which have been modified to access a second hard drive. IIRC, it has a
larger list of hard disks -- as well as the possibility of entering the
disk parameters manually.
> And i can run DOS 3.3 from this HDD.
>
> I have put jumper DS0 on HDD.
>
> HDD parameters:
> # of Cylinders: 820
> # of Tracks per Cylinder: 6
> # of Sectors per Track: 17
You'll get less space on the 3B1/7300/Unix-PC. It reserves one
sector at the end of each track for a replacement when a nearby sector
goes bad. (Happened a lot in those days.)
Good Luck,
DoN.
--
Remove oil spill source from e-mail
Email: <BPdnicholsBP@d-and-d.com> | (KV4PH) Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Back to comp.sys.3b1 | Previous | Next — Previous in thread | Next in thread | Find similar
Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-06-11 05:38 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-06-12 00:13 +0000
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-06-15 11:01 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-06-17 01:43 +0000
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-06-17 00:18 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-06-18 03:42 +0000
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-06-25 01:44 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-06-26 02:23 +0000
Re: Reconstructing an AT&T 7300 Convergent MightyFrame <mightyframect@gmail.com> - 2015-06-13 11:46 -0700
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-06-15 11:01 -0700
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-07-07 01:24 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-07-12 01:06 +0000
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-07-15 07:46 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-07-18 03:53 +0000
Re: Reconstructing an AT&T 7300 vlaarom@gmail.com - 2015-08-04 04:36 -0700
Re: Reconstructing an AT&T 7300 "DoN. Nichols" <BPdnicholsBP@d-and-d.com> - 2015-08-09 02:11 +0000
Re: Reconstructing an AT&T 7300 "vla...@gmail.com" <vlaarom@gmail.com> - 2021-12-13 14:00 -0800
csiph-web