Groups | Search | Server Info | Login | Register

Groups > comp.periphs.scsi > #146

Anybody with SCSI Know How still reading this newsgroup ?

Show all headers | View raw

Is anybody with SCSI Know How still reading this newsgroup ?
I've an external HP LTO-2 streamer which works well with a LSI 20160 
controller, and also with an Adaptec 19160.
But I've also a Christie LTO-3 streamer which is NOT detected at boot 
time from the controller, *regardless* if the SCSI bus is terminated or 
not terminated. Btw. the adaptec controller reports even if a device is 
properly bus terminated, so you can't do anything wrong.

When I booted up with the connected LTO-2 streamer, but then exchanging 
the streamer with the LTO-3 one, I was able to use/control the LTO-3 
streamer, and also to work with LTO-3 tapes.

But exchanging the streamer device everytime AFTER I booted the PC, just 
to be able to use the external device would not make sense.

What can be the reason that the LTO-3 streamer is NOT detected by the 
SCSI controller, but can be used when booted with the LTO-2 streamer and 
then be exchanged with the LTO-3 streamer ?

Any further tipps welcome.

Back to comp.periphs.scsi | Previous | Next — Next in thread | Find similar

Thread

Anybody with SCSI Know How still reading this newsgroup ? Peter Dassow <z80eu@arcor.de> - 2017-01-27 21:49 +0100
  Re: Anybody with SCSI Know How still reading this newsgroup ? Michael Bäuerle <michael.baeuerle@gmx.net> - 2017-01-28 10:21 +0000
    Re: Anybody with SCSI Know How still reading this newsgroup ? Peter Dassow <z80eu@arcor.de> - 2017-02-02 00:42 +0100
      Re: Anybody with SCSI Know How still reading this newsgroup ? Michael Bäuerle <michael.baeuerle@stz-e.de> - 2017-02-02 11:07 +0100
        Re: Anybody with SCSI Know How still reading this newsgroup ? Peter Dassow <z80eu@arcor.de> - 2017-02-06 20:07 +0100
          Re: Anybody with SCSI Know How still reading this newsgroup ? jeffj@panix.com (Jeff Jonas) - 2017-02-12 23:16 -0500

csiph-web