Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > uk.comp.home-networking > #2108

Re: Assistance required please!!!

From "Flyiñg Ñuñ 2°22 +" <flyingnun@roseofwhite.plus.com>
Newsgroups uk.comp.home-networking
Subject Re: Assistance required please!!!
Date 2022-04-24 12:20 +0100
Message-ID <jckq45Fmn1hU1@mid.individual.net> (permalink)
References <jca9g5FlurhU1@mid.individual.net><20220420140817.7866473d@ryz><jccur9F76r5U1@mid.individual.net> <20220421140826.53de2941@ryz>

Show all headers | View raw


Marco Moock wrote:
> Am Donnerstag, 21. April 2022, um 12:52:13 Uhr schrieb Flyi_g _u_ 2_22
> +:
>
>> Marco Moock wrote:
>>> Am Mittwoch, 20. April 2022, um 12:35:36 Uhr schrieb Flyi_g _u_ 2_22
>>> +:
>>>
>>>> That was a
>>>> doddle as 'Tosh' found the Epson XP-335 straight away and would
>>>> print and/or scan whenever I asked it to.  The problem is that I
>>>> cannot get Tosh to find any other device on my network other that
>>>> the router - that was no problem either,  but finding Nettie,
>>>> Nova, Experior 'phone or HUAWEI tablet was is a definite No No.
>>>>     Is there anyone in here who could lead me to and hopefully
>>>> guide me through some procedure to unite Tosh with Nettie and Nova
>>>> on my network.
>>>
>>> How do you want to find them?
>>> There are many ways to do so: mDNS, SMB, some proprietary
>>> protocols.. What did you use in the past?
>>> Do the new devices have software installed that supports these
>>> protocols?
>>>
>> That's probably the biggest part of the problem Marco.  My current
>> understanding of  IT terminology.  When the network was originally
>> set up I believe it was done by me being guided through the
>> procedures by a professional IT engineer, who is no longer around. We
>> used the 'Network Setup Wizard' found in the 'Control Panel' of my XP
>> devices,  and once set up seemed fine for some considerable time.  I
>> seem to recollect I had to buy and install a Networking board on
>> 'Nova' but that facility was built into 'Nettie' which was a couple
>> of years down the line. Your phrase "mDNS, SMB, some proprietary
>> protocols",  is almost gobble-de-gook to me.  When I say I'm IT
>> dyslexic,  it's the best way that I can think of, of describing how
>> my brain reacts to the IT technical jargon.  It's something that I
>> suffer from and it seems to worsen with age.  I was hoping that in
>> Windows 10,  there would be some form of  'Network Setup Wizard'
>> which would be relevantly simple to follow.  But I can't even locate
>> one.   All I can find is 'Network and Internet settings'  and the
>> only item that looks relevant to my home network is the 'Network and
>> Sharing Centre' page, but I can't find a setting that seems relevant
>> to me connecting 'Tosh' to my computers on my existing network.
>> 'Tosh' is, of course, already connected to the network's router and
>> printer.
>
> Check if the printer has Ethernet connectivity. Does if it have ip
> addresses?
>
Yes my printer is connected to Nova with N Ethernet lead and to Nettie 
by wifi.
Both are working well and it does have IP addresses for both. It 
connects to 'Tosh' the refurbished Windows 10 laptop too,  and also 
seems to work fine too.
>
> Be aware that XP has IPv6 disabled by default, so it can't be used
> (you can enable it in ncpa.cpl --> Properties of LAN connection -->
> Install Protocol --> IPv6).
>
I don't understand all that but both Nettie and Nova are running Windows 
XP the protocol IPv6 must be installed then. All I am trying to do is to 
get "Tosh" (W10) to connect to both Nettie (XP) and Nova(XP).  All three 
are running from wifi from the same Plusnet router as is the Epson 
XP-335 printer.
-- 
Heard melodies are sweet but those Unheard are sweeter.
FN 2º22+. Mungo Brandybuck of Buckland..
flyingnun@roseofwhite.plus.com 

Back to uk.comp.home-networking | Previous | NextPrevious in thread | Next in thread | Find similar


Thread

Assistance required please!!! "Flyi�g �u� 2�22 +" <flyingnun@roseofwhite.plus.com> - 2022-04-20 12:35 +0100
  Re: Assistance required please!!! Marco Moock <mo01@posteo.de> - 2022-04-20 14:08 +0200
    Re: Assistance required please!!! "Flyi�g �u� 2�22 +" <flyingnun@roseofwhite.plus.com> - 2022-04-21 12:52 +0100
      Re: Assistance required please!!! Marco Moock <mo01@posteo.de> - 2022-04-21 14:08 +0200
        Re: Assistance required please!!! "Flyi�g �u� 2�22 +" <flyingnun@roseofwhite.plus.com> - 2022-04-24 12:20 +0100
          Re: Assistance required please!!! Marco Moock <mo01@posteo.de> - 2022-04-24 15:45 +0200
            Re: Assistance required please!!! "Flyi�g �u� 2�22+" <flyingnun@roseofwhite.plus.com> - 2022-04-26 11:08 +0100

csiph-web