Groups | Search | Server Info | Login | Register


Groups > comp.mail.uucp > #285

Re: Connection issues

From jayjwa <jayjwa@atr2.ath.cx.invalid>
Newsgroups comp.mail.uucp
Subject Re: Connection issues
Date 2024-12-31 14:23 -0500
Organization Atr2 RG 2025
Message-ID <87seq3odvd.fsf@atr2.ath.cx> (permalink)
References <vksju6$6iv$1@ereborbbs.duckdns.org> <875xn2ndy2.fsf@atr2.ath.cx> <vl0nad$m7d$2@ereborbbs.duckdns.org>

Show all headers | View raw


Kyonshi <gmkeros@gmail.com> writes:

> Hmm. I get the remote prompt for system esgaroth, but after entering
> the password it does not do anything for a while, then closes the
> connection with
>
> 	cu: Got hangup signal
> 	cu: Exit status 0
> 	cu: fconn_close: Closing connection
>                                                   			Disconnected.
>
> It seems to me I am getting a connection, and then it doesn't know
> what to do with one another. I am getting a handshake failed error
> again.

Note 'cu' uses the uucp config files; if you do this with kermit you
might get a different response. If so, the issue is likely your config
files.


$ cu kirin
Connected.


Welcome to OpenVMS (TM) VAX Operating System, Version V7.3    

Username: ~.

Disconnected.


Check for permissions on the remote system. My distro ships the binaries
so that only users in the "uucp" group can use them (changed). Check
your x/inetd stanza (whichever Debian uses) on the remote host.

-r-sr-xr-- 1 uucp uucp 287704 Oct 31 15:16 /usr/sbin/uucico
Debian might do things differently.

service uucp
{
        flags           = IPv6
        socket_type     = stream
        protocol        = tcp
        wait            = no
        user            = uucp
        group           = uucp
        server          = /usr/sbin/uucico                                      
        server_args     = -l --debug chat,handshake,uucp-proto,proto,port,incoming
        log_on_failure  += USERID                                               
        log_on_success  += USERID                                               
}

Your "call" file should have something like:
remotehostyourcalling  logintouseonremotehost  theremotepassword

for each host you call. Taylor-to-Taylor, most defaults should work
otherwise. 

-- 
PGP Key ID: 781C A3E2 C6ED 70A6 B356  7AF5 B510 542E D460 5CAE
       "The Internet should always be the Wild West!"

Back to comp.mail.uucp | Previous | NextPrevious in thread | Next in thread | Find similar


Thread

Connection issues Kyonshi <gmkeros@gmail.com> - 2024-12-29 23:54 +0100
  Re: Connection issues Grant Taylor <gtaylor@tnetconsulting.net> - 2024-12-29 18:15 -0600
    Re: Connection issues Kyonshi <gmkeros@gmail.com> - 2024-12-31 12:57 +0100
  Re: Connection issues jayjwa <jayjwa@atr2.ath.cx.invalid> - 2024-12-29 20:43 -0500
    Re: Connection issues Kyonshi <gmkeros@gmail.com> - 2024-12-31 13:16 +0100
      Re: Connection issues jayjwa <jayjwa@atr2.ath.cx.invalid> - 2024-12-31 14:23 -0500
        Re: Connection issues Kyonshi <gmkeros@gmail.com> - 2025-01-08 15:16 +0100
          Re: Connection issues Kyonshi <gmkeros@gmail.com> - 2025-01-08 15:28 +0100

csiph-web