Re: DIP IDC

From	David Lesher <wb8foz@panix.com>
Newsgroups	sci.electronics.design, sci.electronics.components
Subject	Re: DIP IDC
Date	2017-12-29 19:07 +0000
Organization	NRK Clinic for habitual NetNews Abusers - Beltway Annex
Message-ID	<p263q5$l54$1@reader2.panix.com> (permalink)
References	<p25tl0$oav$1@reader2.panix.com> <idv1C.8435$ww.7956@fx27.iad>

Cross-posted to 2 groups.

Show all headers | View raw

bitrex <bitrex@de.lete.earthlink.net> writes:


>Could you whip up a bunch of little PCB adapters? Pads for the
>cheap IDC males on one side, pads for some thick durable pins
>to slot into the DIP sockets on the other (that also route the
>conductors appropriately)?

Zero clearance on the DIP end. It's under something else.

>The pins on the one in the second link look like they were
>designed to be soldered once permanently to a PCB. They won't
>survive too many insertion-removal cycles. If they don't need
>to be cycled then the question is why have the sockets there at
>all.

The sockets on both ends, the 8-pin DIP & the 2x4 0.1 IDC are on
existing boards. I wish the 2x4 was male headers, and I may be
able to get a special order on them so it will be, but the DIP
is on the PLC itself.


-- 
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

Back to sci.electronics.components | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

DIP IDC David Lesher <wb8foz@panix.com> - 2017-12-29 17:22 +0000
  Re: DIP IDC bitrex <bitrex@de.lete.earthlink.net> - 2017-12-29 12:47 -0500
    Re: DIP IDC David Lesher <wb8foz@panix.com> - 2017-12-29 19:07 +0000
      Re: DIP IDC Andre Majorel <cheney@halliburton.com> - 2017-12-29 19:54 +0000
        Re: DIP IDC bitrex <bitrex@de.lete.earthlink.net> - 2017-12-29 15:04 -0500
          Re: DIP IDC David Lesher <wb8foz@panix.com> - 2017-12-29 21:20 +0000
  Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-29 11:59 -0800
    Re: DIP IDC David Lesher <wb8foz@panix.com> - 2017-12-30 03:34 +0000
      Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-30 00:46 -0800
        Re: DIP IDC Michael A Terrell <mike.terrell@earthlink.net> - 2017-12-30 04:38 -0500
          Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-30 10:10 -0800
            Re: DIP IDC Michael A Terrell <mike.terrell@earthlink.net> - 2017-12-30 21:08 -0500
              Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-30 20:14 -0800
              Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-30 20:17 -0800
                Re: DIP IDC Michael A Terrell <mike.terrell@earthlink.net> - 2017-12-31 05:24 -0500
                Re: DIP IDC Sergey Kubushyn <ksi@koi8.net> - 2017-12-31 21:29 +0000
                Re: DIP IDC John Robertson <spam@flippers.com> - 2017-12-31 18:41 -0800
                Re: DIP IDC Michael A Terrell <mike.terrell@earthlink.net> - 2017-12-31 22:35 -0500
                Re: DIP IDC Jasen Betts <jasen@xnet.co.nz> - 2018-01-01 05:14 +0000
                Re: DIP IDC Sergey Kubushyn <ksi@koi8.net> - 2018-01-01 23:52 +0000

csiph-web