Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.gentoo.dev > #70493

Re: [gentoo-dev] New News Item: 2026-xx-yy-dracut-hostonly-cmdline

Show all headers | View raw

On 02/05/2026 14:52, Nowa Ammerlaan wrote:
> Hi Team,
> 
> This is the first draft of a news item to accompany the next release of 
> sys-kernel/dracut (111) which will change the default value of the 
> hostonly_cmdline setting. I have tried to keep a logical flow from the 
> specific to the general which I hope will help users find which specific 
> instructions are relevant for them. There might still be room for 
> improvement here though, this is a rather complicated one because of the 
> large variation in setups. Anyway, let me know what you think.
> 
> Best regards,
> Nowa
> 
Sorry, I messed up the copy-paste somehow, here's the proper version:

Title: Dracut changed default for hostonly_cmdline setting
Author: Nowa Ammerlaan <nowa@gentoo.org>
Posted: 2026-xx-yy
Revision: 1
News-Item-Format: 2.0
Display-If-Installed: >=sys-kernel/dracut-111

Dracut is an initramfs generation tool. It may be invoked via the
installkernel mechanism or manually after building custom kernels.

What changed?
====================

In version 111 of sys-kernel/dracut the default for the
hostonly_cmdline setting changed from enabled to disabled. When
enabled, this setting causes Dracut to attempt to detect which
parameters are required on the kernel command line to boot the system.
Examples are the root= parameter or parameters controlling partition
decryption. These parameters are then included in the generated
initramfs and appended to the kernel command line during boot.

Why has this setting been changed
====================

When enabled, Dracut's hostonly_cmdline setting may use the kernel
command line of the running kernel (/proc/cmdline) to construct the
kernel command line that will be embedded in the initramfs. This can
cause problems when Dracut is being executed from a live or rescue
environment. In such cases an incorrect root= could be included in the
embedded kernel command line which could lead to boot failure.

To prevent this behaviour from causing such unpleasant surprises, a
check was added to sys-kernel/installkernel to detect whether the
kernel was being installed from chroot and if Dracut was configured
to include an embedded kernel command line (hostonly_cmdline=yes).
While this check prevents boot failures, it also has the unfortunate
side effect of creating a hard error that is triggered by default on
new Gentoo installs. This has proven to be a significant stumbling
block that new users often trip over. For this reason it was decided
to disable the hostonly_cmdline setting in Gentoo's default settings
for Dracut.

User Action Required (all users)
====================

When upgrading to Dracut version 111, a sanity check should be
performed to ensure that kernel parameters required to boot
successfully are still present in the kernel command line. When in
doubt, ensure a system rescue CD or USB is close at hand. More
specific instructions for various setups follow below, ordered from
the specific to the more general.

As always, do not hesitate to use our support channels to ask for
clarification or assistance.

User Action Required (Systemd GPT Auto Generator)
====================

Systems that utilise the Systemd GPT Auto Generator mechanism to
automatically detect and find the root partition at boot should not
require any manual intervention. Though, before rebooting, users
should verify that the GPT Auto Generator is actually being used and
is working properly. To do so, check that /dev/gpt-auto-root currently
exists and points to your root partition. For example:

ls -l /dev/gpt-auto-root

Should produce an output similar to the below if /dev/nvme0n1p1 is the
root partition:

lrwxrwxrwx 1 root root 4 May  2 10:33 /dev/gpt-auto-root -> nvme0n1p1

If this is not the case then proceed with the instructions below that
best match the setup to ensure that the root partition is set on the
kernel command line using an alternative method.

User Action Required (Generic Unified Kernel Image: "generic-uki")
====================

Users booting with the generic Unified Kernel Image (USE=generic-uki)
functionality provided by the distribution kernels (dist-kernel) do
not have to take any action as the hostonly_cmdline is already
disabled in these builds:
- sys-kernel/vanilla-kernel[generic-uki]
- sys-kernel/gentoo-kernel[generic-uki]
- sys-kernel/gentoo-kernel-bin[generic-uki]

User Action Required (Unified Kernel Image with Secure Boot)
====================

Booting a Unified Kernel Image (UKI) with Secure Boot enabled is a
special case because in this situation the kernel command line
supplied by the bootloader or the firmware is ignored and the built-in
UKI command line, along with the parameters embedded in the initramfs,
take precedence. The instructions below are also relevant if no
kernel command line is set by the bootloader or the firmware.

An easy way to check the built-in kernel command line of an UKI is to
use the lsinitrd tool provided by sys-kernel/dracut. For example:

lsinitrd /efi/EFI/Linux/gentoo-x.y.z-gentoo-dist.efi

This command will produce an output that could contain for example:

<snip>
Command line:
quiet
splash
root=PARTUUID=7ae430c6-07e8-3b4e-a796-b2a28706b3fb
<snip>
dracut cmdline:
ro

Showing that the built-in kernel command line for this UKI contains
"quiet", "splash" and sets the root partition to the partition that
has the partition UUID "7ae430c6-07e8-3b4e-a796-b2a28706b3fb".
Additionally, the kernel command line embedded in the initramfs
contains "ro".

If kernel parameters that are essential for successfully booting
the system (such as root=) are present in the "dracut cmdline"
section but not in the "Command line" section then user intervention
is required. In that case please adjust the configuration of the
UKI generator to include the appropriate kernel parameters in the
built-in UKI command line.

If Ukify (sys-apps/systemd[ukify] or sys-apps/systemd-utils[ukify])
is generating the UKI then adjust the "Cmdline=" setting in
/etc/kernel/uki.conf. If that setting is not present in the uki.conf
then adjust the kernel command line in /etc/kernel/cmdline.

If Dracut itself is generating the UKI then please set or adjust the
"kernel_cmdline=" setting in a dracut configuration file in
/etc/dracut.conf.d/.

If unsure which tool is generating the UKI then please inspect the
current value of "uki_generator" in /usr/lib/kernel/install.conf and
/etc/kernel/cmdline.

User Action Required (systemd-boot)
====================

Users booting with systemd-boot should compare the contents of
/etc/kernel/cmdline against the kernel command line embedded in the
initramfs or Unified Kernel Image (UKI). If Unified Kernel Images are
used and the /etc/kernel/cmdline file is empty or missing then no
kernel command line is set by systemd-boot, in this case please refer
to the "Unified Kernel Image with Secure Boot" section above, even if
Secure Boot is not enabled.

The lsinitrd utility provided by sys-kernel/dracut can be used to
inspect the kernel parameters embedded in an initramfs or UKI. For
example, in the case of a plain initramfs:

lsinitrd /efi/gentoo/x.y.z-gentoo-dist/initrd

Or, in the case of an Unified Kernel Image:
lsinitrd /efi/EFI/Linux/gentoo-x.y.z-gentoo-dist.efi

The final lines of the output of these commands show which kernel
parameters are embedded in the Dracut initramfs. For example:

dracut cmdline:
ro

If kernel parameters that are essential for successfully booting
the system (such as root=) are present in the "dracut cmdline"
section but not in /etc/kernel/cmdline then user intervention is
required. In that case please adjust /etc/kernel/cmdline to include
the missing kernel parameters.

User Action Required (GRUB)
====================

Users booting with GRUB should compare the GRUB_CMDLINE_LINUX and
GRUB_CMDLINE_LINUX_DEFAULT settings in /etc/default/grub against the
kernel command line embedded in the initramfs or
Unified Kernel Image (UKI). The lsinitrd utility provided by
sys-kernel/dracut can be used for this purpose. For example, in the
case of a plain initramfs:

lsinitrd /boot/initramfs-x.y.z-gentoo-dist.img

Or, in the case of an Unified Kernel Image:
lsinitrd /boot/vmlinuz-x.y.z-gentoo-dist.efi

The final lines of the output of these commands show which kernel
parameters are embedded in the Dracut initramfs. For example:

dracut cmdline:
ro

If kernel parameters that are essential for successfully booting
the system (such as root=) are present in the "dracut cmdline"
section but not in /etc/default/grub then user intervention is
required. In that case please adjust the GRUB_CMDLINE_LINUX or
GRUB_CMDLINE_LINUX_DEFAULT settings in /etc/default/grub to include
the missing kernel parameters. After adjustments don't forget to
update the grub.cfg. For example:

grub-mkconfig -o /boot/grub/grub.cfg

Note that when Secure Boot is enabled the grub.cfg might reside in a
different directory, for example: /efi/EFI/Gentoo/grub.cfg.

User Action Required (rEFInd)
====================

Users booting with rEFInd should compare kernel command line set
in the refind_linux.conf file against the kernel command line embedded
in the initramfs or Unified Kernel Image (UKI). The refind_linux.conf
configuration file usually resides in /boot but may also be found
elsewhere. If Unified Kernel Images are used and the refind_linux.conf
configuration file is empty or missing then no kernel command line is
set by rEFInd, in this case please refer to the "Unified Kernel Image
with Secure Boot" section above, even if Secure Boot is not enabled.

The lsinitrd utility provided by sys-kernel/dracut can be used to
inspect the kernel parameters embedded in an initramfs or UKI. For
example, in the case of a plain initramfs:

lsinitrd /boot/initramfs-x.y.z-gentoo-dist.img

Or, in the case of an Unified Kernel Image:
lsinitrd /boot/vmlinuz-x.y.z-gentoo-dist.efi

The final lines of the output of these commands show which kernel
parameters are embedded in the Dracut initramfs. For example:

dracut cmdline:
ro

If kernel parameters that are essential for successfully booting
the system (such as root=) are present in the "dracut cmdline"
section but not in the refind_linux.conf then user intervention is
required. In that case please adjust refind_linux.conf to include the
missing kernel parameters.

User Action Required (other/general)
====================

For other setups please refer to the wiki page or manual of your
bootloader and find where the kernel command line is set. Then
compare this setting with the kernel parameters embedded in the
initramfs. If essential parameters are present in the later but not in
the former, then please move those parameters to your bootloader's
configuration. When Unified Kernel Images are used then also consider
the built-in UKI command line set by the UKI generator. Note that when
Secure Boot is disabled, the bootloader may override the built-in UKI
command line. However, when Secure Boot is enabled then any parameters
set by the bootloader are ignored and the built-in UKI command line is
always used.

See Also
====================

[1] https://github.com/dracut-ng/dracut-ng/pull/2399
[2] https://bugs.gentoo.org/971572

Back to linux.gentoo.dev | Previous | Next — Next in thread | Find similar

Thread

Re: [gentoo-dev] New News Item: 2026-xx-yy-dracut-hostonly-cmdline Nowa Ammerlaan <nowa@gentoo.org> - 2026-05-02 15:00 +0200
  Re: [gentoo-dev] New News Item: 2026-xx-yy-dracut-hostonly-cmdline Immolo <immoloism@googlemail.com> - 2026-05-06 20:50 +0200
  Re: [gentoo-dev] New News Item: 2026-xx-yy-dracut-hostonly-cmdline Sam James <sam@gentoo.org> - 2026-05-07 02:30 +0200

csiph-web