sun hardware's power requirements

From	Paul Cho <oktokie@gmail.com>
Newsgroups	comp.sys.sun.admin
Subject	sun hardware's power requirements
Date	2012-01-11 17:56 -0800
Organization	http://groups.google.com
Message-ID	<28542013.1744.1326333375167.JavaMail.geo-discussion-forums@vbxl6> (permalink)

Show all headers | View raw

I have a new project of deploying two server infrastructure and help on the power requirement would be appreciated.

I have to deploy two racks as follows and I am wondering if getting a 250V 30A NEMA L6-30P electric receptacles for each rack should be enough for the rack configurations below. Total Ampere does not exceed 30A however, I am worried about power surge when system starts up and of course I plan on powering the equipment one by one. What's the field experience on the power requirement?

Thanks.

-Paul

rack config1
7 x D1000 storage array(100-240VAC, 2.6A, 260W)
1 x V480 server(100-240VAC, 8.6A)
total: 26.8A

rack config2
5 x A5200 storage array(100-120VAC, 6.6A or 200-240, 3.3A 650W)
1 x V480 server(100-240VAC, 8.6A)
total: 25.1A.

Back to comp.sys.sun.admin | Previous | Next — Next in thread | Find similar

Thread

sun hardware's power requirements Paul Cho <oktokie@gmail.com> - 2012-01-11 17:56 -0800
  Re: sun hardware's power requirements "Richard B. Gilbert" <rgilbert88@comcast.net> - 2012-01-12 00:44 -0500
    Re: sun hardware's power requirements Ian Collins <ian-news@hotmail.com> - 2012-01-12 22:29 +1300
      Re: sun hardware's power requirements "Richard B. Gilbert" <rgilbert88@comcast.net> - 2012-01-12 10:21 -0500
  Re: sun hardware's power requirements Bruce Esquibel <bje@ripco.com> - 2012-01-12 14:39 +0000

csiph-web