Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.sys.mac.hardware.storage > #1088
| From | ANTant@zimage.com (Ant) |
|---|---|
| Subject | Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? |
| Newsgroups | comp.sys.ibm.pc.hardware.storage, comp.sys.mac.hardware.storage, comp.sys.mac.system |
| References | <DcadnY_IfbQaCdfLnZ2dnUU7-VWdnZ2d@earthlink.com> <davja2FptqcU1@mid.individual.net> <VL6dnQFQoOYCT9fLnZ2dnUU7-T2dnZ2d@earthlink.com> <1me1sga.1qb59i9bqnvdxN%dempson@actrix.gen.nz> <zPqdnfZtxpRi99bLnZ2dnUU7-dudnZ2d@earthlink.com> |
| Message-ID | <7e-dnVjyi4SpONbLnZ2dnUU7-dmdnZ2d@earthlink.com> (permalink) |
| Date | 2015-11-17 16:07 -0600 |
Cross-posted to 3 groups.
I did more tests with the same setups with a borrowed Lenovo W530
laptop/notebook with its updated 64-bit W7 EE SP1. The results were
similiar the 3 adapters. Even more stranger is that I tried formatting a
TM partition to a plain FAT32 on MBP to see if Windows could see it.
Only Vantec adapter could see it while the other 2 couldn't see any
partitions. See http://imgur.com/a/HlyvC for those Windows screen
(shot/capture)s [167.68 GB is the internal SSD). What the frak?
Am I setting up this 2 TB HDD incorrectly or something? A few months ago
in Mac OS X, I told its Disk Utility to (mak/creat)e 3 partitions for 3
different encrypted TM backups with Vantec adapter. I don't get why both
OSes can't see any partitions with the 2 non-Vantec adapters. Am I
missing something or doing this wrong? :(
In comp.sys.mac.hardware.storage Ant <ANTant@zimage.com> wrote:
> > > Here is what I see when Mac OS X can't detected my encrypted Time
> > > Machine partitions on the external 2 TB HDD with the 2 non-Vantec
> > > adapters: http://imgur.com/a/uneDX
> > System Information's view of the drive (in the system report USB
> > category) would be more helpful as it lets us see details for the drive
> > and all its partitions at once. Your screen shot really only shows the
> > drive level and a vague hint at what it thinks the partitions are.
> > Also important: corresponding details when you use the Vantec adapter,
> > so we can see what it is supposed to look like.
> I hope I am looking at the right USB sections that sees my 2 TB 3.5"
> SATA HDD (wished there was a way to export all of USB sections at once;
> FYI, 250 GB is the internal SSD):
> NON-ADAPTER #1:
> USB Hi-Speed Bus:
> Host Controller Location: Built-in USB
> Host Controller Driver: AppleUSBEHCI
> PCI Device ID: 0x1e26
> PCI Revision ID: 0x0004
> PCI Vendor ID: 0x8086
> Bus Number: 0x1d
> Hub:
> Product ID: 0x0024
> Vendor ID: 0x8087 (Intel Corporation)
> Version: 0.00
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d100000 / 2
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> USB to ATA/ATAPI Bridge:
> Product ID: 0x2338
> Vendor ID: 0x152d (JMicron Technology Corp.)
> Version: 1.00
> Serial Number: D57CC481422C
> Speed: Up to 480 Mb/sec
> Manufacturer: JMicron
> Location ID: 0x1d110000 / 6
> Current Available (mA): 500
> Current Required (mA): 2
> Capacity: 2 TB (2,000,398,934,016 bytes)
> Removable Media: Yes
> Detachable Drive: Yes
> BSD Name: disk2
> Partition Map Type: MBR (Master Boot Record)
> S.M.A.R.T. status: Not Supported
> Volumes:
> disk2s1:
> Capacity: 250.05 GB (250,049,866,240 bytes)
> BSD Name: disk2s1
> Content: 0xEE
> Hub:
> Product ID: 0x2512
> Vendor ID: 0x0424 (SMSC)
> Version: b.b3
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d180000 / 3
> Current Available (mA): 500
> Current Required (mA): 2
> Built-In: Yes
> Apple Internal Keyboard / Trackpad:
> Product ID: 0x0262
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 2.22
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d182000 / 5
> Current Available (mA): 500
> Current Required (mA): 40
> Built-In: Yes
> BRCM20702 Hub:
> Product ID: 0x4500
> Vendor ID: 0x0a5c (Broadcom Corp.)
> Version: 1.00
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181000 / 4
> Current Available (mA): 500
> Current Required (mA): 94
> Built-In: Yes
> Bluetooth USB Host Controller:
> Product ID: 0x8286
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 1.50
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181300 / 8
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> Hub:
> Product ID: 0x0024
> Vendor ID: 0x8087 (Intel Corporation)
> Version: 0.00
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d100000 / 2
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> USB to ATA/ATAPI Bridge:
> Product ID: 0x2338
> Vendor ID: 0x152d (JMicron Technology Corp.)
> Version: 1.00
> Serial Number: D57CC481422C
> Speed: Up to 480 Mb/sec
> Manufacturer: JMicron
> Location ID: 0x1d110000 / 6
> Current Available (mA): 500
> Current Required (mA): 2
> Capacity: 2 TB (2,000,398,934,016 bytes)
> Removable Media: Yes
> Detachable Drive: Yes
> BSD Name: disk2
> Partition Map Type: MBR (Master Boot Record)
> S.M.A.R.T. status: Not Supported
> Volumes:
> disk2s1:
> Capacity: 250.05 GB (250,049,866,240 bytes)
> BSD Name: disk2s1
> Content: 0xEE
> Hub:
> Product ID: 0x2512
> Vendor ID: 0x0424 (SMSC)
> Version: b.b3
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d180000 / 3
> Current Available (mA): 500
> Current Required (mA): 2
> Built-In: Yes
> Apple Internal Keyboard / Trackpad:
> Product ID: 0x0262
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 2.22
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d182000 / 5
> Current Available (mA): 500
> Current Required (mA): 40
> Built-In: Yes
> BRCM20702 Hub:
> Product ID: 0x4500
> Vendor ID: 0x0a5c (Broadcom Corp.)
> Version: 1.00
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181000 / 4
> Current Available (mA): 500
> Current Required (mA): 94
> Built-In: Yes
> Bluetooth USB Host Controller:
> Product ID: 0x8286
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 1.50
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181300 / 8
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> USB to ATA/ATAPI Bridge:
> Product ID: 0x2338
> Vendor ID: 0x152d (JMicron Technology Corp.)
> Version: 1.00
> Serial Number: D57CC481422C
> Speed: Up to 480 Mb/sec
> Manufacturer: JMicron
> Location ID: 0x1d110000 / 6
> Current Available (mA): 500
> Current Required (mA): 2
> Capacity: 2 TB (2,000,398,934,016 bytes)
> Removable Media: Yes
> Detachable Drive: Yes
> BSD Name: disk2
> Partition Map Type: MBR (Master Boot Record)
> S.M.A.R.T. status: Not Supported
> Volumes:
> disk2s1:
> Capacity: 250.05 GB (250,049,866,240 bytes)
> BSD Name: disk2s1
> Content: 0xEE
> NON-VANTEC ADAPTER #2:
> USB 3.0 SuperSpeed Bus:
> Host Controller Location: Built-in USB
> Host Controller Driver: AppleUSBXHCI
> PCI Device ID: 0x1e31
> PCI Revision ID: 0x0004
> PCI Vendor ID: 0x8086
> Bus Number: 0x0a
> Composite Device:
> Product ID: 0x0611
> Vendor ID: 0x1f75 (Innostor Co., Ltd.)
> Version: 0.06
> Serial Number: 20130702
> Speed: Up to 5 Gb/sec
> Manufacturer:
> Location ID: 0x15100000 / 1
> Current Available (mA): 900
> Current Required (mA): 800
> Capacity: 2 TB (2,000,398,934,016 bytes)
> Removable Media: Yes
> Detachable Drive: Yes
> BSD Name: disk2
> Partition Map Type: MBR (Master Boot Record)
> S.M.A.R.T. status: Not Supported
> Volumes:
> disk2s1:
> Capacity: 250.05 GB (250,049,866,240 bytes)
> BSD Name: disk2s1
> Content: 0xEE
> VANTEC ADAPTER:
> USB Hi-Speed Bus:
> Host Controller Location: Built-in USB
> Host Controller Driver: AppleUSBEHCI
> PCI Device ID: 0x1e26
> PCI Revision ID: 0x0004
> PCI Vendor ID: 0x8086
> Bus Number: 0x1d
> Hub:
> Product ID: 0x0024
> Vendor ID: 0x8087 (Intel Corporation)
> Version: 0.00
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d100000 / 2
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> USB to ATA/ATAPI bridge:
> Product ID: 0x2338
> Vendor ID: 0x152d (JMicron Technology Corp.)
> Version: 1.00
> Serial Number: 000001D91CC4
> Speed: Up to 480 Mb/sec
> Manufacturer: JMicron
> Location ID: 0x1d110000 / 6
> Current Available (mA): 500
> Current Required (mA): 2
> Capacity: 2 TB (2,000,398,934,016 bytes)
> Removable Media: Yes
> Detachable Drive: Yes
> BSD Name: disk2
> Partition Map Type: GPT (GUID Partition Table)
> S.M.A.R.T. status: Not Supported
> Volumes:
> EFI:
> Capacity: 314.6 MB (314,572,800 bytes)
> BSD Name: disk2s1
> Content: EFI
> Volume UUID: E783267B-A4C3-3556-B751-DBED770EB996
> disk2s2:
> Capacity: 666.8 GB (666,800,029,696 bytes)
> BSD Name: disk2s2
> Content: Apple_CoreStorage
> Boot OS X:
> Capacity: 134.2 MB (134,217,728 bytes)
> BSD Name: disk2s3
> Content: Apple_Boot
> Volume UUID: EBE804A8-9A50-3480-84B5-B9C3B5E66B7C
> disk2s4:
> Capacity: 666.8 GB (666,799,308,800 bytes)
> BSD Name: disk2s4
> Content: Apple_CoreStorage
> Boot OS X:
> Capacity: 134.2 MB (134,217,728 bytes)
> BSD Name: disk2s5
> Content: Apple_Boot
> Volume UUID: 2C761115-3344-3356-B5A3-4E8F94C231CA
> FAT32:
> Capacity: 666.08 GB (666,081,759,232 bytes)
> Available: 665.92 GB (665,916,407,808 bytes)
> Writable: Yes
> File System: MS-DOS FAT32
> BSD Name: disk2s6
> Mount Point: /Volumes/FAT32
> Content: Microsoft Basic Data
> Volume UUID: 675CFF06-5EB7-3285-809D-6597383FCECF
> Hub:
> Product ID: 0x2512
> Vendor ID: 0x0424 (SMSC)
> Version: b.b3
> Speed: Up to 480 Mb/sec
> Location ID: 0x1d180000 / 3
> Current Available (mA): 500
> Current Required (mA): 2
> Built-In: Yes
> Apple Internal Keyboard / Trackpad:
> Product ID: 0x0262
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 2.22
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d182000 / 5
> Current Available (mA): 500
> Current Required (mA): 40
> Built-In: Yes
> BRCM20702 Hub:
> Product ID: 0x4500
> Vendor ID: 0x0a5c (Broadcom Corp.)
> Version: 1.00
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181000 / 4
> Current Available (mA): 500
> Current Required (mA): 94
> Built-In: Yes
> Bluetooth USB Host Controller:
> Product ID: 0x8286
> Vendor ID: 0x05ac (Apple Inc.)
> Version: 1.50
> Speed: Up to 12 Mb/sec
> Manufacturer: Apple Inc.
> Location ID: 0x1d181300 / 8
> Current Available (mA): 500
> Current Required (mA): 0
> Built-In: Yes
> I hope those help. :)
--
Quote of the Week: "Yo mama's glasses are so thick, she can burn ants with them." --unknown
Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
/\___/\ Ant(Dude) @ http://antfarm.home.dhs.org (Personal Web Site)
/ /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net
| |o o| |
\ _ / Please nuke ANT if replying by e-mail privately. If credit-
( ) ing, then please kindly use Ant nickname and AQFL URL/link.
Back to comp.sys.mac.hardware.storage | Previous | Next — Previous in thread | Next in thread | Find similar
Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-16 20:44 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? Jolly Roger <jollyroger@pobox.com> - 2015-11-17 02:56 +0000
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-17 01:09 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? dempson@actrix.gen.nz (David Empson) - 2015-11-17 20:28 +1300
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-17 02:30 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-17 11:59 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-17 16:07 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? dempson@actrix.gen.nz (David Empson) - 2015-11-18 13:59 +1300
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-17 20:54 -0600
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? dempson@actrix.gen.nz (David Empson) - 2015-11-18 18:01 +1300
Re: Mac OS X doesn't see the encrypted partitions on my external SATA HDD when using different adapter/controllers? ANTant@zimage.com (Ant) - 2015-11-18 12:01 -0600
Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ANTant@zimage.com (Ant) - 2015-11-20 19:59 -0600
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ErikRS <mac-dane@is.invalid> - 2015-11-21 04:23 +0100
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ANTant@zimage.com (Ant) - 2015-11-21 00:14 -0600
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? dempson@actrix.gen.nz (David Empson) - 2015-11-22 01:11 +1300
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ANTant@zimage.com (Ant) - 2015-11-21 11:23 -0600
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? dempson@actrix.gen.nz (David Empson) - 2015-11-22 10:04 +1300
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ANTant@zimage.com (Ant) - 2015-11-21 16:51 -0600
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? Lewis <g.kreme@gmail.com.dontsendmecopies> - 2015-11-22 05:05 +0000
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? ANTant@zimage.com (Ant) - 2015-11-22 00:19 -0600
Re: Can't see the partitions on my external SATA HDD when using different adapter/controllers (Vantec vs. no brand name)? Robert Nichols <SEE_SIGNATURE@localhost.localdomain.invalid> - 2015-11-22 09:51 -0600
csiph-web