Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.sys.ibm.pc.hardware.storage > #8497
| From | Shadow <Sh@dow.br> |
|---|---|
| Newsgroups | comp.sys.ibm.pc.hardware.storage |
| Subject | Re: Interpreting a smartctl -a report |
| Date | 2024-05-07 16:03 -0300 |
| Organization | A noiseless patient Shadow |
| Message-ID | <cbuk3jdei8ehs9fp33s9b685nu4v47ek5n@4ax.com> (permalink) |
| References | <v1dhia$3avbp$1@dont-email.me> |
On Tue, 7 May 2024 15:32:27 -0000 (UTC), <bp@www.zefox.net> wrote: >A raspberry pi running 64-bit RasPiOS froze up and failed >to reboot reliably, apparently unable to find the hard disk. > >The USB-serial bridge was replaced with a known-good unit, >which allowed repeated successful reboots. After a long self-test, >sysctl -a reported a raw_read_error_rate that looks rather bad but >nonetheless claims the disk "passed": > >bob@raspberrypi:~ $ sudo smartctl -a /dev/sda | more >smartctl 7.2 2020-12-30 r5155 [aarch64-linux-6.1.21-v8+] (local build) >Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org > >=== START OF INFORMATION SECTION === >Model Family: Seagate Barracuda 2.5 5400 >Device Model: ST1000LM048-2E7172 >Serial Number: ZKP1CTK1 >LU WWN Device Id: 5 000c50 0dc14483b >Firmware Version: 0001 >User Capacity: 1,000,204,886,016 bytes [1.00 TB] >Sector Sizes: 512 bytes logical, 4096 bytes physical >Rotation Rate: 5400 rpm >Form Factor: 2.5 inches >TRIM Command: Available >Device is: In smartctl database [for details use: -P show] >ATA Version is: ACS-3 T13/2161-D revision 3b >SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) >Local Time is: Tue May 7 08:04:15 2024 PDT >SMART support is: Available - device has SMART capability. >SMART support is: Enabled > >=== START OF READ SMART DATA SECTION === >SMART overall-health self-assessment test result: PASSED > >General SMART Values: >Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. >Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. >Total time to complete Offline >data collection: ( 0) seconds. >Offline data collection >capabilities: (0x71) SMART execute Offline immediate. > No Auto Offline data collection support. > Suspend Offline collection upon new > command. > No Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. >SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. >Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. >Short self-test routine >recommended polling time: ( 1) minutes. >Extended self-test routine >recommended polling time: ( 168) minutes. >Conveyance self-test routine >recommended polling time: ( 2) minutes. >SCT capabilities: (0x3035) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > >SMART Attributes Data Structure revision number: 10 >Vendor Specific SMART Attributes with Thresholds: >ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 100 064 006 Pre-fail Always - 1769744 > 3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0 > 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 108 > 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 113998668 > 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11911 (91 132 0) > 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 96 >184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 >187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 >188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 >189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 >190 Airflow_Temperature_Cel 0x0022 073 058 040 Old_age Always - 27 (Min/Max 19/39) >191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 7 >192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 52 >193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 301007 >194 Temperature_Celsius 0x0022 027 042 000 Old_age Always - 27 (0 16 0 0 0) >197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 >198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 >199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 >240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 11074 (49 218 0) >241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4402454028 >242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 482619242 >254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 > >SMART Error Log Version: 1 >No Errors Logged > >SMART Self-test log structure revision number 1 >Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error ># 1 Extended offline Completed without error 00% 11902 - ># 2 Short offline Completed without error 00% 1 - > >SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing >Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. >If Selective self-test is pending on power-up, resume after 0 minute delay. > >I'm somewhat baffled at the wording, can anybody tell if the test actually ran >to completion and the results imply a healthy disk? Save any important data you have on that disk, then "retire" it. If you're interested, HDSentinel has a free utility for Linux: <https://www.hdsentinel.com/download.php> Unpack it and run it as root (or sudo). It will translate all that stuff above to human language. []'s > >Thanks for reading, > >bob prohaska -- Don't be evil - Google 2004 We have a new policy - Google 2012 Google Fuchsia - 2021
Back to comp.sys.ibm.pc.hardware.storage | Previous | Next — Previous in thread | Next in thread | Find similar
Interpreting a smartctl -a report <bp@www.zefox.net> - 2024-05-07 15:32 +0000
Re: Interpreting a smartctl -a report Shadow <Sh@dow.br> - 2024-05-07 16:03 -0300
Re: Interpreting a smartctl -a report ant@zimage.comANT (Ant) - 2024-05-07 20:34 +0000
Re: Interpreting a smartctl -a report <bp@www.zefox.net> - 2024-05-07 22:04 +0000
Re: Interpreting a smartctl -a report ant@zimage.comANT (Ant) - 2024-05-08 16:10 +0000
Re: Interpreting a smartctl -a report Shadow <Sh@dow.br> - 2024-05-07 20:41 -0300
Re: Interpreting a smartctl -a report <bp@www.zefox.net> - 2024-05-08 01:20 +0000
csiph-web