Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.sys.dec > #2931

Re: best guess for mount-verification problem

From helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply))
Newsgroups comp.os.vms, comp.sys.dec
Subject Re: best guess for mount-verification problem
Date 2021-06-28 10:57 +0000
Organization Multivax C&R
Message-ID <sbc9v3$v43$1@gioia.aioe.org> (permalink)
References <sbc86h$656$1@gioia.aioe.org> <sbc8uu$hn9$1@gioia.aioe.org>

Cross-posted to 2 groups.

Show all headers | View raw


In article <sbc8uu$hn9$1@gioia.aioe.org>,
helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply))
writes: 

> In article <sbc86h$656$1@gioia.aioe.org>,
> helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply))
> writes: 
> 
> > I have a three-node cluster (when no satellite or test system has joined
> > it) and physical disks (blue SBB in BA356) on each node (no dual-ported
> > disks; each disk has a direct connection to only one node).  
> 
> > When something fails, I just replace it with something of similar build.
> > (The main reason for moving to SBB disks was to be able to replace a
> > disk (the most common failure) without having to dismount the members it
> > hosts, shut down the system, remove it from the shelf, open it, replace
> > the disk, close it, put it back on the shelf, boot it, remount the
> > members it hosts.) 
> > 
> > For a while now I've noticed disks going in and out of mount 
> > verification.  It is clear which node is involved.  So, my plan is to 
> > replace hardware (and maybe try to find the problem when the hardware is 
> > out of the cluster) and hope that it goes away.  
> 
> > Theoretically it could be the SCSI cable, but my guess is that it is
> > either the expansion box or the SCSI card.  (I have had one expansion
> > box fail, but it failed completely.)  Which is more likely?

OK, spent some time staring at hardware in the cellar.  :-|  It seems 
that before the mount verification sets in, the two LEDs to the left of 
the plug in the power supply go out, then come back on, then all the 
disks light up briefly.  So probably a problem with the box or the power 
supply.

I can try replacing the power supply first, if that doesn't help then
the SCSI interface at the top, then if that doesn't help the entire box.

Any other ideas?

Back to comp.sys.dec | Previous | NextPrevious in thread | Next in thread | Find similar


Thread

best guess for mount-verification problem helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply)) - 2021-06-28 10:27 +0000
  Re: best guess for mount-verification problem helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply)) - 2021-06-28 10:40 +0000
    Re: best guess for mount-verification problem helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply)) - 2021-06-28 10:57 +0000
      Re: best guess for mount-verification problem Hans Bachner <hans@bachner.priv.at> - 2021-06-28 16:04 +0200
        Re: best guess for mount-verification problem helbig@asclothestro.multivax.de (Phillip Helbig (undress to reply)) - 2021-06-28 19:21 +0000

csiph-web