Bit3 80 Column Mode with ATR8000

Newsgroups	comp.sys.atari.8bit
Date	2013-11-07 09:25 -0800
Message-ID	<c99733dc-cb12-42a1-849c-a6cefaecad8e@googlegroups.com> (permalink)
Subject	Bit3 80 Column Mode with ATR8000
From	Jason Harmon <jason@getrealconsulting.com>

Show all headers | View raw

I recently acquired an ATR8000 and was able to get it hooked up to my Atari 800 and use it both as an Atari drive controller and to boot into CP/M.

My 800 has a Bit3 80 column card in it, and I understand that the ATR8000 CP/M terminal emulator can support this, but I have no documentation of how to enable 80 column mode when going into CP/M.

Does anyone here have some information of how to do this that they could share with me?

Thanks.

Jason Harmon

Back to comp.sys.atari.8bit | Previous | Next — Next in thread | Find similar

Thread

Bit3 80 Column Mode with ATR8000 Jason Harmon <jason@getrealconsulting.com> - 2013-11-07 09:25 -0800
  Re: Bit3 80 Column Mode with ATR8000 Steven Hirsch <snhirsch@gmail.com> - 2013-11-08 08:10 -0500
    Re: Bit3 80 Column Mode with ATR8000 Jason Harmon <jason@getrealconsulting.com> - 2013-11-08 07:24 -0800
  Re: Bit3 80 Column Mode with ATR8000 Jason Harmon <jason@getrealconsulting.com> - 2013-11-08 10:29 -0800
    Re: Bit3 80 Column Mode with ATR8000 Steven Hirsch <snhirsch@gmail.com> - 2013-11-08 17:17 -0500
      Re: Bit3 80 Column Mode with ATR8000 Jason Harmon <jason@getrealconsulting.com> - 2013-11-10 07:18 -0800
        Re: Bit3 80 Column Mode with ATR8000 Steven Hirsch <snhirsch@gmail.com> - 2013-11-10 12:00 -0500
        Re: Bit3 80 Column Mode with ATR8000 Steven Hirsch <snhirsch@gmail.com> - 2013-11-10 12:10 -0500
          Re: Bit3 80 Column Mode with ATR8000 Jason Harmon <jason@getrealconsulting.com> - 2013-11-10 17:10 -0800

csiph-web