Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.sys.apple2.programmer > #1963

Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II

Show all headers | View raw

On Thursday, November 19, 2015 at 10:24:13 AM UTC-6, Benoit0123 wrote:
> Mark Lemmert wrote:
> > I am about to start a large 6502 project and for the first time setup
> > cross
> > assembler software to do the coding (SB-Assembler & CC65/CA65 on a Windows
> > 7 PC).
> > 
> > Does anyone know how to transfer the binary output code from a cross
> > assembler to a physical Apple IIe? 
> > 
> > I really appreciate any suggestion that anyone may have! Thanks!
> > 
> > 
> > What I've tried so far.....
> > 
> > 
> > I have tried AppleCommander to create the disk image (and add the binary
> > file) and ADTPro to transfer the disk image to a floppy on my Apple IIe,
> > but it doesn't work (more on that below). However, the code does work in
> > an
> > emmualtor (AppleWIN, Virtual II). 
> > 
> > I am totally open to using different software. And, I have a MAC as well
> > as
> > a PC so I am open to options on either platform. 
> > 
> > 
> > The result is the disk drive makes a strange noise (not the usual
> > griding/recaliberation) and "ERROR 8" is output to the video screen. The
> > floppy is unresponsive to "CATALOG". 
> > 
> > I have done a lot of transferring of disk images back and forth and am
> > fairly familiar with the process, but it has always been with a) disk
> > images downloaded from the Internet, or b) disk images created from a
> > floppy and transferred to a PC (i.e the opposite direction of data flow).
> > 
> > Any ideas are much appreciated. Thanks!
> >
> I understand that:
> a) the UII card (ethernet card with support for base protocols as IP? UDP
> and TCP) is now avalable on the Apple ][ from a2retrosystems.
> b) The ADTPro is updated to take into account this new board for easy
> transfering files and/or disk images from a modern architecture host over
> the netork.
> So that could be the way to go as it does'nt require any physical media
> moves between the Apple // and the developement host.
> HTHATS,
> Benoît

Thanks for the suggestions.

I'm going to start out with a serial port based setup as I plan to mainly test my code in an emulator and only occasionally send a copy over to the physical Apple II.

The solution to my problem with the ADTPro serial port method was to used a disk image created from a bootable DOS floppy, instead of creating the disk image via AppleCommander or CiderPress on the PC side. 
 
> 
> 
> 
> -- 
> Growing old is mandatory..
> growing up is optional..
> But the other way round is as true.

Back to comp.sys.apple2.programmer | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-19 08:01 -0800
  Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Benoit0123 <bgilon@free.fr> - 2015-11-19 16:21 +0000
    Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-19 18:06 -0800
  Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Andy McFadden <thefadden@gmail.com> - 2015-11-19 08:24 -0800
    Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-19 18:03 -0800
  Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II David Schmidt <schmidtd@my-deja.com> - 2015-11-19 13:52 -0500
    Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-19 18:02 -0800
      Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Michael J. Mahon <mjmahon@aol.com> - 2015-11-19 20:11 -0600
        Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II David Schmidt <schmidtd@my-deja.com> - 2015-11-19 22:09 -0500
      Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II David Schmidt <schmidtd@my-deja.com> - 2015-11-19 22:48 -0500
        Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-20 16:17 -0800
          Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II pitz <pitz.wong@gmail.com> - 2015-11-23 10:39 -0800
            Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Andy McFadden <thefadden@gmail.com> - 2015-11-23 11:28 -0800
              Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II David Schmidt <schmidtd@my-deja.com> - 2015-11-23 16:29 -0500
        Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II ol.sc@web.de (Oliver Schmidt) - 2015-11-21 13:35 +0000
          Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Mark Lemmert <mark.lemmert@gmail.com> - 2015-11-21 11:44 -0800
  Re: Subject Transferring Cross Assembler code from Mac/PC to Apple II Egan Ford <datajerk@gmail.com> - 2015-11-22 16:56 -0700

csiph-web