Groups > comp.sys.apple2.programmer > #253

Re: ProDOS Assembly Tools docs

From	David Schmenk <dschmenk@gmail.com>
Newsgroups	comp.sys.apple2.programmer
Subject	Re: ProDOS Assembly Tools docs
Date	2012-04-05 09:55 -0700
Organization	http://groups.google.com
Message-ID	<2776118.2035.1333644920588.JavaMail.geo-discussion-forums@pbvs10> (permalink)
References	(3 earlier) <dog_cow-1332863689@macgui.com> <8778508.902.1332876992215.JavaMail.geo-discussion-forums@pbcvg9> <7u2dnWkYHdqOEu7SnZ2dnUVZ_s6dnZ2d@giganews.com> <21020111.1014.1332979614386.JavaMail.geo-discussion-forums@pbctp7> <c9226272-e54c-4325-8ba5-03e7d84bf96d@dc2g2000vbb.googlegroups.com>

Show all headers | View raw

On Thursday, April 5, 2012 7:34:56 AM UTC-7, A2CPM wrote:
> Hi, y'all!
> 
>     'ENTRY' is the mnemonic to use to define an address that can be
> referred to be another module.  'DEF' and '.DEF' are synonyms for this
> mnemonic.  'EXTRN' is the mnemonic to use to define a reference to an
> address in another module.  'REF' and '.REF' are synonyms for this
> mnemonic.  'ZXTRN' is the mnemonic to use to define a reference to a
> page zero address in another module.  'ZREF' is a synonym for this
> mnemonic.  Finally, 'REL' is the mnemonic to use to get the assembler
> to generate a 'REL' file instead of a 'BIN' file.
> 
> Willi

John Matthews' site has pretty much documented everything needed to code with EDASM.  The only thing I would update, and the reason I was looking for the actual documentation, was some symbol table information.  The MACRO bit ($040) is apparently unused, just as in the DOS version.  I plan on co-opting this for PLASMAs needs.

Dave...

Back to comp.sys.apple2.programmer | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-03-26 13:03 -0700
  Re: ProDOS Assembly Tools docs dog_cow@macgui.com (D Finnigan) - 2012-03-26 22:34 +0000
    Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-03-26 17:11 -0700
      Re: ProDOS Assembly Tools docs dog_cow@macgui.com (D Finnigan) - 2012-03-27 15:54 +0000
        Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-03-27 12:36 -0700
          Re: ProDOS Assembly Tools docs Antoine Vignau <antoine.vignau@laposte.net> - 2012-03-27 13:42 -0700
            Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-03-27 16:26 -0700
          Re: ProDOS Assembly Tools docs Steven Hirsch <snhirsch@gmail.com> - 2012-03-28 18:22 -0400
            Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-03-28 17:06 -0700
              Re: ProDOS Assembly Tools docs A2CPM <a2@wilserv.com> - 2012-03-30 12:42 -0700
                Re: ProDOS Assembly Tools docs MarkLim <markpmlim@yahoo.com.sg> - 2012-04-07 01:03 -0700
                Re: ProDOS Assembly Tools docs MarkLim <markpmlim@yahoo.com.sg> - 2012-04-07 00:57 -0700
              Re: ProDOS Assembly Tools docs A2CPM <a2@wilserv.com> - 2012-04-05 07:34 -0700
                Re: ProDOS Assembly Tools docs A2CPM <a2@wilserv.com> - 2012-04-05 08:50 -0700
                Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-04-05 09:55 -0700
                Re: ProDOS Assembly Tools docs dog_cow@macgui.com (D Finnigan) - 2012-04-05 17:33 +0000
                Re: ProDOS Assembly Tools docs A2CPM <a2@wilserv.com> - 2012-04-05 15:06 -0700
                Re: ProDOS Assembly Tools docs markpmlim@yahoo.com.sg - 2012-04-07 00:45 -0700
                Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-04-05 21:09 -0700
                Re: ProDOS Assembly Tools docs Steven Hirsch <snhirsch@gmail.com> - 2012-04-06 08:09 -0400
                Re: ProDOS Assembly Tools docs "Bill Garber" <willy46pa@comcast.net> - 2012-04-07 21:03 -0400
                Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-04-07 19:02 -0700
                Re: ProDOS Assembly Tools docs David Schmenk <dschmenk@gmail.com> - 2012-04-07 20:16 -0700
                Re: ProDOS Assembly Tools docs A2CPM <a2@wilserv.com> - 2012-04-08 20:52 -0700

csiph-web