Re: Is there a utility to peek and poke PCIe devices

Path	csiph.com!x330-a1.tempe.blueboxinc.net!usenet.pasdenom.info!gegeweb.org!de-l.enfer-du-nord.net!feeder2.enfer-du-nord.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From	General Schvantzkoph <schvantzkoph@yahoo.com>
Newsgroups	comp.os.linux.hardware, comp.arch.fpga
Subject	Re: Is there a utility to peek and poke PCIe devices
Date	11 Aug 2011 13:21:16 GMT
Lines	50
Message-ID	<9ai3abFf73U4@mid.individual.net> (permalink)
References	<9agc44Ff73U3@mid.individual.net> <4e437d24$0$6539$9b4e6d93@newsspool4.arcor-online.net>
Mime-Version	1.0
Content-Type	text/plain; charset=UTF-8
Content-Transfer-Encoding	8bit
X-Trace	individual.net IVFpoy0Tyg7SKwYfRuAQNwvwwjq76d6sqUIiyvf6n8jTLylzUP
Cancel-Lock	sha1:OuQsb0vQT8OFF2Ap3XQTDg7KKhM=
User-Agent	Pan/0.133 (House of Butterflies)
Xref	x330-a1.tempe.blueboxinc.net comp.os.linux.hardware:569 comp.arch.fpga:1667

Cross-posted to 2 groups.

Show key headers only | View raw

On Thu, 11 Aug 2011 08:57:05 +0200, rndhro wrote:

> On 08/10/11 23:39, General Schvantzkoph wrote:
>> Is there a utility that does peeks and pokes to PCIe devices. I'm
>> developing an FPGA with a PCIe interface and I'd like to do some simple
>> memory accesses before I move on to the more complicated things like
>> DMA. We have a driver in development but I think there is a standard
>> Altera driver already in the kernel which I assume would be good enough
>> for simple accesses.
>> 
>> I'm running on Scientific Linux 6.1.
>> 
>> lspci identifies the device as an Altera device which is correct.
>> 
>> 01:00.0 Unassigned class [ff00]: Altera Corporation Device 0004 (rev
>> 01)
> 
> you don't even need a driver for simple memory access. if your device is
> detected by the kernel you can directly access the BARs via sysfs: # ls
> -l /sys/bus/pci/devices/0000\:01\:00.0/ [...]
> -rw------- 1 root root 256M Aug 11 08:51 resource0 -rw------- 1 root
> root  256 Aug 11 08:51 resource1 -rw------- 1 root root  64K Aug  2
> 08:14 resource2 [...]
> 
> This is an example of a device with 3 BARs. These files can be
> read/written/mmapped... you could use "dd" or write a little C program
> to mmap the files.
> 
> HTH

How do I determine which device is mine?

Here is the lspci output
01:00.0 Unassigned class [ff00]: Altera Corporation Device 0004 (rev 01)

Here are the devices under /sys/bus/pci_express/devices

0000:00:0b.0:pcie01/	0000:00:0c.0:pcie01/	0000:00:0d.0:pcie01/	
0000:00:0e.0:pcie01/
0000:00:0b.0:pcie08/	0000:00:0c.0:pcie08/	0000:00:0d.0:pcie08/	
0000:00:0e.0:pcie08

Here are the devices under /sys/bus/pci/devices

0000:00:00.0/	0000:00:02.0/	0000:00:06.0/	0000:00:09.0/	
0000:00:0c.0/	0000:00:18.0/	0000:00:18.3/	0000:05:00.0/
0000:00:01.0/	0000:00:02.1/	0000:00:07.0/	0000:00:0a.0/	
0000:00:0d.0/	0000:00:18.1/	0000:01:0d.0/
0000:00:01.1/	0000:00:04.0/	0000:00:08.0/	0000:00:0b.0/	
0000:00:0e.0/	0000:00:18.2/	0000:03:00.0

Back to comp.os.linux.hardware | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Is there a utility to peek and poke PCIe devices General Schvantzkoph <schvantzkoph@yahoo.com> - 2011-08-10 21:39 +0000
  Re: Is there a utility to peek and poke PCIe devices rndhro <rnd@hro.org> - 2011-08-11 08:57 +0200
    Re: Is there a utility to peek and poke PCIe devices glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2011-08-11 08:33 +0000
    Re: Is there a utility to peek and poke PCIe devices General Schvantzkoph <schvantzkoph@yahoo.com> - 2011-08-11 13:21 +0000
      Re: Is there a utility to peek and poke PCIe devices rndhro <rnd@hro.org> - 2011-08-11 15:55 +0200
        Re: Is there a utility to peek and poke PCIe devices General Schvantzkoph <schvantzkoph@yahoo.com> - 2011-08-11 15:30 +0000

csiph-web