Re: howto check programs and C libraries

Path	csiph.com!usenet.pasdenom.info!news.franciliens.net!news.muarf.org!nntpfeed.proxad.net!proxad.net!feeder1-2.proxad.net!news.tele.dk!news.tele.dk!small.news.tele.dk!newsgate.cistron.nl!newsgate.news.xs4all.nl!post.news.xs4all.nl!not-for-mail
Return-Path	<python-python-list@m.gmane.org>
X-Original-To	python-list@python.org
Delivered-To	python-list@mail.python.org
X-Spam-Status	OK 0.001
X-Spam-Evidence	'H': 1.00; 'S': 0.00; 'python,': 0.02; 'yet.': 0.04; 'distutils': 0.07; 'idea?': 0.09; 'mind,': 0.09; 'received:80.91': 0.09; 'received:80.91.229': 0.09; 'received:gmane.org': 0.09; 'received:list': 0.09; 'suggest': 0.14; '(when': 0.16; 'libraries.': 0.16; 'preparing': 0.16; 'received:80.91.229.3': 0.16; 'received:plane.gmane.org': 0.16; 'subject:howto': 0.16; 'wrote:': 0.18; 'properly': 0.19; 'separate': 0.22; 'header:User-Agent:1': 0.23; 'module,': 0.24; '(or': 0.24; 'header:X-Complaints-To:1': 0.27; 'idea': 0.28; 'room': 0.29; "i'm": 0.30; 'assumes': 0.31; 'subject:programs': 0.31; 'run': 0.32; 'charge': 0.33; 'checking': 0.33; 'copying': 0.34; 'skip:d 20': 0.34; "i'd": 0.34; 'could': 0.34; 'tool': 0.35; 'but': 0.35; 'really': 0.36; 'charset:us-ascii': 0.36; 'clear': 0.37; 'tasks': 0.38; 'to:addr:python-list': 0.38; 'to:addr:python.org': 0.39; 'enough': 0.39; 'received:org': 0.40; 'how': 0.40; 'hardware': 0.61; 'first': 0.61; 'close': 0.67; 'computers': 0.72; 'presumably': 0.84; 'subject:check': 0.84
X-Injected-Via-Gmane	http://gmane.org/
To	python-list@python.org
From	Dave Angel <davea@davea.name>
Subject	Re: howto check programs and C libraries
Date	Fri, 4 Oct 2013 11:15:21 +0000 (UTC)
References	<CAKUKWz=NXM_Vo_4WGP-gPS43_S0XPXeA_1s2zLddME_9nqLjXw@mail.gmail.com>
Mime-Version	1.0
Content-Type	text/plain; charset=US-ASCII
Content-Transfer-Encoding	7bit
X-Gmane-NNTP-Posting-Host	174.32.174.29
User-Agent	XPN/1.2.6 (Street Spirit ; Linux)
X-BeenThere	python-list@python.org
X-Mailman-Version	2.1.15
Precedence	list
List-Id	General discussion list for the Python programming language <python-list.python.org>
List-Unsubscribe	<https://mail.python.org/mailman/options/python-list>, <mailto:python-list-request@python.org?subject=unsubscribe>
List-Archive	<http://mail.python.org/pipermail/python-list/>
List-Post	<mailto:python-list@python.org>
List-Help	<mailto:python-list-request@python.org?subject=help>
List-Subscribe	<https://mail.python.org/mailman/listinfo/python-list>, <mailto:python-list-request@python.org?subject=subscribe>
Newsgroups	comp.lang.python
Message-ID	<mailman.720.1380885344.18130.python-list@python.org> (permalink)
Lines	27
NNTP-Posting-Host	2001:888:2000:d::a6
X-Trace	1380885344 news.xs4all.nl 15885 [2001:888:2000:d::a6]:34510
X-Complaints-To	abuse@xs4all.nl
Xref	csiph.com comp.lang.python:55474

Show key headers only | View raw

On 4/10/2013 05:30, David Palao wrote:

> Hello,
> I'm in charge of preparing a computer room for the practices of
> "introduction to programming".
> One of the tasks is checking that from all the computers in the room
> one can execute some programs and link (and compile) against some
> libraries.
> My first idea was using Autotools (or cmake), but as I'm a big fan of
> python, I was thinking how to do that with python, and I don't have a
> clear solution yet.
> I know that distutils includes the distutils.command.config module,
> and I think it could do the job (when properly subclassed).
> Do you have a better idea?

I don't have any specific tool in mind, but I'd suggest that you really
need to run the tool on only one of the machines, and run a separate
tool on them all that assures that they are identical, presumably made
that way by wiping each and copying from a master

That assumes the hardware is close enough to identical to make this
practical.

-- 
DaveA

Back to comp.lang.python | Previous | Next | Find similar | Unroll thread

Thread

Re: howto check programs and C libraries Dave Angel <davea@davea.name> - 2013-10-04 11:15 +0000

csiph-web