Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte

References	(1 earlier) <l28m9v$aao$2@dont-email.me> <mailman.439.1380441619.18130.python-list@python.org> <l28mtv$c50$2@dont-email.me> <mailman.440.1380442039.18130.python-list@python.org> <l28npr$hai$1@dont-email.me>
Date	2013-09-29 18:23 +1000
Subject	Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte
From	Chris Angelico <rosuav@gmail.com>
Newsgroups	comp.lang.python
Message-ID	<mailman.441.1380443023.18130.python-list@python.org> (permalink)

Show all headers | View raw

On Sun, Sep 29, 2013 at 6:19 PM, Νίκος <nikos.gr33k@gmail.com> wrote:
> ipval is suposed to get just an ip address.
> ip addresses doesnt change its just number seperated by dots.

That's one way an IP address can be rendered. It's not the only one.
There's an entire category of IP addresses that's usually written with
colons rather than dots. However, I reiterate: How do you KNOW what's
in ipval? I wonder if there's an easy way for you to find out...

ChrisA

Thread

UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 10:49 +0300
  Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 10:53 +0300
    Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-29 18:00 +1000
      Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 11:04 +0300
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-29 18:07 +1000
          Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 11:19 +0300
            Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-29 18:23 +1000
              Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 11:30 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 11:37 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Steven D'Aprano <steve+comp.lang.python@pearwood.info> - 2013-09-29 09:45 +0000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 13:24 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Dave Angel <davea@davea.name> - 2013-09-29 11:11 +0000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 14:25 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Dave Angel <davea@davea.name> - 2013-09-29 11:46 +0000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 14:51 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris “Kwpolska” Warrick <kwpolska@gmail.com> - 2013-09-29 14:38 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-30 00:01 +1000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-30 00:19 +1000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 19:06 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Joel Goldstick <joel.goldstick@gmail.com> - 2013-09-29 12:14 -0400
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 19:19 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Larry Hudson <orgnut@yahoo.com> - 2013-09-29 20:16 -0700
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 15:45 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-30 21:03 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Antoon Pardon <antoon.pardon@rece.vub.ac.be> - 2013-09-30 20:18 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 19:42 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-30 23:13 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 21:44 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 00:34 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Joel Goldstick <joel.goldstick@gmail.com> - 2013-09-30 17:44 -0400
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 01:08 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Joel Goldstick <joel.goldstick@gmail.com> - 2013-09-30 18:13 -0400
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 23:14 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 01:19 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 23:28 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 01:30 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-10-01 08:43 +1000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 01:48 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Steven D'Aprano <steve+comp.lang.python@pearwood.info> - 2013-09-30 23:50 +0000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 22:47 +0100
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Ned Batchelder <ned@nedbatchelder.com> - 2013-09-30 14:54 -0400
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Antoon Pardon <antoon.pardon@rece.vub.ac.be> - 2013-09-30 22:51 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-10-01 08:29 +1000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 01:36 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-10-01 08:56 +1000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 02:14 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Antoon Pardon <antoon.pardon@rece.vub.ac.be> - 2013-10-01 09:27 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-01 11:39 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Antoon Pardon <antoon.pardon@rece.vub.ac.be> - 2013-10-01 11:10 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Steven D'Aprano <steve+comp.lang.python@pearwood.info> - 2013-10-02 01:36 +0000
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Antoon Pardon <antoon.pardon@rece.vub.ac.be> - 2013-10-02 09:23 +0200
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-02 11:52 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-10-02 11:49 +0300
                Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Grant Edwards <invalid@invalid.invalid> - 2013-10-01 14:29 +0000
                Mutual respect, tolerance, encouragement (was: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte) Ben Finney <ben+python@benfinney.id.au> - 2013-10-01 08:42 +1000
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Ned Batchelder <ned@nedbatchelder.com> - 2013-09-29 06:53 -0400
          Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Steven D'Aprano <steve+comp.lang.python@pearwood.info> - 2013-09-29 14:08 +0000
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Terry Reedy <tjreedy@udel.edu> - 2013-09-29 13:30 -0400
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Ned Batchelder <ned@nedbatchelder.com> - 2013-09-29 15:08 -0400
  Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-09-29 17:53 +1000
    Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Νίκος <nikos.gr33k@gmail.com> - 2013-09-29 10:59 +0300
      Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2013-09-29 12:25 -0400
      Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Grant Edwards <invalid@invalid.invalid> - 2013-09-30 13:51 +0000
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Mark Lawrence <breamoreboy@yahoo.co.uk> - 2013-09-30 15:51 +0100
          Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Denis McMahon <denismfmcmahon@gmail.com> - 2013-09-30 22:09 +0000
        Re: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xb6 in position 0: invalid start byte Chris Angelico <rosuav@gmail.com> - 2013-10-01 01:06 +1000

csiph-web