Re: How to set 250000 baud rate in pyserial ?

Newsgroups	comp.lang.python
Date	2012-10-26 15:01 -0700
References	<d5871091-63c8-4582-9485-138195cf6d36@googlegroups.com> <mailman.2858.1351188682.27098.python-list@python.org>
Subject	Re: How to set 250000 baud rate in pyserial ?
From	kurabas@gmail.com
Message-ID	<mailman.2908.1351288913.27098.python-list@python.org> (permalink)

Show all headers | View raw

Error is like cannot set special baud rate.
But as I said pyserial set this speed without problem  for ttyUSB0
So it seems pyserial uses diefferent code depending of port type.
I tried to simlink ln -s ttyACM0 ttyUSB0 but it does not work


On Thursday, October 25, 2012 9:11:23 PM UTC+3, Dennis Lee Bieber wrote:
> On Thu, 25 Oct 2012 04:09:56 -0700 (PDT), kurabas@gmail.com declaimed
> 
> the following in gmane.comp.python.general:
> 
> 
> 
> > I use Arduino 1280 and Arduino 2560 under Fedora 15. 
> 
> > 1280 creates ttyUSB0 port  and can be set at 2500000 successfully.
> 
> > 2560 creates ttyACM0 port and can be only set at speeds from list (no 250000) in pyserial. How to set 250000 to ttyACM0 port?? Need I patch kernel or python?
> 
> 
> 
> 	You don't say what error you are receiving but looking at the source
> 
> (serialposix.py) implies that it accepts nearly anything on Linux, and
> 
> relies on the OS returning a success/failure if the value is allowed or
> 
> not. 
> 
> 
> 
> 	xxxBSD, SunOS, HPUX, IRIX, and CYGWIN systems don't allow "special"
> 
> baudrates at all.
> 
> 
> 
> 	.NET, JVM, and Windows don't seem to have explicit call outs for bad
> 
> rates -- just a generic port configured OK test.
> 
> -- 
> 
> 	Wulfraed                 Dennis Lee Bieber         AF6VN
> 
>         wlfraed@ix.netcom.com    HTTP://wlfraed.home.netcom.com/

Back to comp.lang.python | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

How to set 250000 baud rate in pyserial ? kurabas@gmail.com - 2012-10-25 04:09 -0700
  Re: How to set 250000 baud rate in pyserial ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2012-10-25 14:11 -0400
    Re: How to set 250000 baud rate in pyserial ? Grant Edwards <invalid@invalid.invalid> - 2012-10-25 21:14 +0000
    Re: How to set 250000 baud rate in pyserial ? kurabas@gmail.com - 2012-10-26 15:01 -0700
      Re: How to set 250000 baud rate in pyserial ? Michael Torrie <torriem@gmail.com> - 2012-10-26 16:08 -0600
      Re: How to set 250000 baud rate in pyserial ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2012-10-27 00:43 -0400
    Re: How to set 250000 baud rate in pyserial ? kurabas@gmail.com - 2012-10-26 15:01 -0700

csiph-web