flashing with mspdebug and launchpad MSP430-2553

Newsgroups	comp.arch.embedded, comp.lang.forth
From	Albert van der Horst <albert@spenarnc.xs4all.nl>
Subject	flashing with mspdebug and launchpad MSP430-2553
Date	2012-03-24 17:07 +0000
Message-ID	<m1efl2.5du@spenarnc.xs4all.nl> (permalink)
Organization	Dutch Forth Workshop

Cross-posted to 2 groups.

Show all headers | View raw

I have a $4 TI Launchpad with a MSP430 processor.
The 2553 is a little bit too new for mspdebug however.
(It has a Forth flashed into it. See http://www.4e4th.eu.)

Anyway I discovered that I could not use mspdebug to reflash the
program unless I cheat by telling mspdebug that it is another
processor.

So (on a Ubuntu 10.04.4) I can reflash by

sudo mspdebug --fet-force-id MSP430FG4618 rf2500

and then interactively:

load forth.hex

There is no action needed to tell mspdebug where to find the device.
Also modem-manager (contrary to messages) doesn't mess anything up.


Groetjes Albert



--
-- 
Albert van der Horst, UTRECHT,THE NETHERLANDS
Economic growth -- being exponential -- ultimately falters.
albert@spe&ar&c.xs4all.nl &=n http://home.hccnet.nl/a.w.m.van.der.horst

Back to comp.lang.forth | Previous | Next — Next in thread | Find similar

Thread

flashing with mspdebug and launchpad MSP430-2553 Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-24 17:07 +0000
  Re: flashing with mspdebug and launchpad MSP430-2553 cas_news@strotmann.de (Carsten Strotmann (Usenet)) - 2012-03-25 11:31 +0200
    Re: flashing with mspdebug and launchpad MSP430-2553 Albert van der Horst <albert@spenarnc.xs4all.nl> - 2012-03-25 19:40 +0000

csiph-web