Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.lang.basic.visual.misc > #3825

Mcp2200 Driver Windows 7 Download

Show all headers | View raw

I'm trying to connect a development board. based on MCP2200 USB/UART converter to a High Sierra system. However: I do not see any device appearing in /dev/. The same device does connect to a Windows and Linux system, so I do not suspect the hardware. Is teher ny driver to be installed maybe? The manufacturer claims that the chip supprt the cdc/acm protocol, see site: _MCP2221_CDC_Mac_Readme.txt


Thanks Eskimo, indeed my sentence was a bit garbled,sorry about that. This is what I meant to say: "Is there any driver to be installed maybe?" So your answer is 'no', but...... When I connected the device, it did not even appear in the usb-device-tree, as visible in the "About This Mac/System Report/USB" dialog. When I connected another device, also a usb/serial converter, with a different chip, in this case a Prolific one, it did appear in that tree. With your confirmation that the chip is supported by the default kernel-drivers, I concluded that it had to be a hardware problem, and I found out by now: The board I was using happened to have an additional usb-hub on board, which caused the chain of usd-hubs to exceed the max of five. So changed my usb-chain, made sure I had a powered hub in between and TaDa!!



mcp2200 driver windows 7 download

Download File https://t.co/UAzShwXXRI 





 35fe9a5643

Back to comp.lang.basic.visual.misc | Previous | Next | Find similar

Thread

Mcp2200 Driver Windows 7 Download Madonna Gussler <madonnagussler@gmail.com> - 2024-01-10 01:01 -0800

csiph-web