Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.lang.basic.visual.misc > #4266

Wave Camera Software Free !NEW! Download

Show all headers | View raw

<div>The Freefly Wave camera is a specialty camera designed entirely for slow motion footage. It is the ideal choice for scientific applications, fine art, and unique b-roll footage. Its small size and light weight makes it suitable for drone use as well.</div><div></div><div></div><div>The footage from this camera is recorded in a compressed 10-bit RGB raw format that can't be currently opened with anything other than Wave Player. From there, you can export in MOV, H.264, and in PNG/JPEG sequence formats. This camera will mount as an external drive when connected to a computer but for the most reliable performance, the USB cable and USB port used need to be USB-C SuperSpeed (5Gbps). There is no audio capture with this camera. External SSDs cannot be used at this time. A 1.0 shim is pre-installed on the camera. Please do not remove the shim, as it is essential for finding accurate focus marks on most lenses.</div><div></div><div></div><div></div><div></div><div></div><div>wave camera software free download</div><div></div><div>Download: https://t.co/G8dSG6lDj5 </div><div></div><div></div><div> The footage from this camera is recorded in a compressed 10-bit RGB raw format that can't be currently opened with anything other than Wave Player on a Windows operating system. From there, you can export in MOV, H.264, and in PNG/JPEG sequence formats. </div><div></div><div> There is no LCD/monitor on this camera. To preview footage or interact with camera menus, you must use an external monitor. Freefly recommends the Atomos Shinobi and the SmallHD Focus 5. Most monitors that can receive 1080p30 over HDMI should work.</div><div></div><div> External recording is limited to 1080p30.</div><div></div><div> This camera uses a passive, locking E mount. There are no electrical connections to the lens and electronic focus and iris control are not supported. </div><div></div><div> This camera will mount as an external drive when connected to a computer but for the most reliable performance, the USB cable and USB port used need to be USB-C SuperSpeed (5Gbps). </div><div></div><div> HDMI preview image quality will be closer to 1080p when recording in 4K (and 480p when recording in 2K).</div><div></div><div> This camera is not a good choice for use in low light.</div><div></div><div> There is no audio capture with this camera.</div><div></div><div> External SSDs cannot be used at this time. </div><div></div><div> This camera is compatible with external 12-26V V-mount batteries (batteries not included). It comes with an AC power adapter/charger, where the 2200mAh internal battery will last 1 hour. Charge time is approximately 90 minutes.</div><div></div><div> A 1.0 shim is pre-installed on the camera. Please do not remove the shim, as it is essential for finding accurate focus marks on most lenses.</div><div></div><div></div><div>Zwave is a mesh topology intended for tiny messages sent infrequently and does not guarantee the sequences of how the messages will be received. For that reason, it is not suitable for video or audio streaming.</div><div></div><div></div><div>There are a number of Wi-Fi or ethernet cameras that can work well with SmartThings. And any camera that has an IFTTT channel on the free IFTTT service can get some integration with SmartThings that way.</div><div></div><div></div><div> plboucher</div><div></div><div>There are so many camera systems out there it is mind boggling. Each has its own strengths and weaknesses. Firstly, determine precisely what you want to accomplish. Do you want to do 24/7 monitoring like a baby cam or do you want to monitor a specific area and only have the camera trigger when motion is detected? Do you want to use it indoors or outdoors? If outdoors, do you have a way to provide power to the cameras or will they need to run on batteries? Do you want local and cloud storage or just cloud storage? How many cameras do you think you will eventually end up with as the cost of subscription fees must also be considered? Do you want a great integration with Smartthings or only use what is available through IFTTT? Will you have a strong wifi signal where you want to mount them? Do you want them inside looking through windows, (there are different types of Infrared systems)?</div><div></div><div></div><div>also know that there is no wireless camera that can compete with the wired cameras for reliability and resolution. If you are wanting to really identify people and license plates and have better night time/low light clarity then a wired Poe system is going to be better for that.</div><div></div><div></div><div>May be im taking it little bit out of scope, but why do you need to integrate into ST?</div><div></div><div>I have a great NVR with 4K POE outdoor cameras, fantastic resolution, 10 days recording (including backup to cloud) and mobile app.</div><div></div><div>I can playback and see recording include those with motion alert. (yellow bars on the picture).</div><div></div><div>the system is connected to UPS. Router too. 1Gb internet.</div><div></div><div>I also have few internal cameras like WYZE, no integration, but can playback manually based on ST motion sensor alert.</div><div></div><div></div><div>For $35 each, these are awesome cameras. Setup of both cameras took about 10 - 15 minutes. One of the problems is there is little to no documentation so it took me three days to understand how to load the PC app and how to save pictures and videos. They claim to work with Smartthings through IFTTT but after looking at the IFTTT sites for both products I see no way to integrate them. The motion sensing is very if not too sensitive. Other than that, Fantastic cameras. I hope someone will be able to integrate with Smartthings soon.</div><div></div><div></div><div>I have my home assistant server with a Z-Wave controller, so far my only device is a Z-Wave enabled deadbolt. I'm trying to pick devices for a home assistant security system, and Costco has a good deal on both Blink and Ring devices, however from what I can tell they both connect via WiFi. I was under the impression that most ring security devices connect via a Z-Wave backbone. Am I mistaken? Are there good Z-Wave cameras I should be looking at? What does everybody recommend?</div><div></div><div></div><div></div><div></div><div></div><div></div><div>Sorry for the caps but its brilliant and I know what you did. I never thought to open it up. Now you can get the motion notifications and control the lights using the homeseer zwave device and just use the ring for the camera recording. I might go a little further and replace the lights with different bulbs so that they match my other lights.</div><div></div><div></div><div>I just took a look at my Ring floodlights sans camera to see if that could be modded - Not sure as the existing motion detector has a straight shaft rather than a threaded socket and probably the wrong diameter.</div><div></div><div></div><div>In camera mode (both video and camera) sometime the screen shows soft black wave running from top to bottom (for more understanding about "black wave" just like when you focus the camera on TV screen). However I didn't focus my camera on TV screen anymore. The problem last for 1-5 minutes. When this problem occurred If I go on and take a photo sometime the wave could be captured into my photo as well but mostly these running black wave can not be captured into the photo.</div><div></div><div></div><div>I understand that alarm systems are only designed to work in certain countries due to different Z-wave frequencies of the components. Does the same apply to cameras such as the floodlight or do they use a different system and can still work with the alarm despite where they originated?</div><div></div><div></div><div> Bruce5 wrote:</div><div></div><div>I understand that alarm systems are only designed to work in certain countries due to different Z-wave frequencies of the components. Does the same apply to cameras such as the floodlight or do they use a different system and can still work with the alarm despite where they originated?</div><div></div><div></div><div>Ocean breezes. Loads of sunshine. Crashing waves. Our live surf cam gives you a heads up on the water and weather at Folly Beach Pier! Picture yourself surfing, soaking up rays or lounging poolside as you look across the ocean. And while the surf cam lets you enjoy the waves 24/7, why not book a stay at Tides to experience our gorgeous beach hotel for yourself?</div><div></div><div></div><div>Please sign up to JAIs e-newsletter and get the latest news on products (area scan cameras, line scan cameras and traffic flashes), white papers, technologies and general news. All e-newsletters include an unsubscribe link. You may opt-out at any time. See our privacy policy for further information about processing of your personal data.</div><div></div><div></div><div>ZL41 Wave 5.5 is an ideal workhorse camera, a highly cost-effective and flexible solution that delivers a superior field of view from a 5.5 Megapixel sensor. Furthermore, this camera offers 2-in-1 rolling and true global shutter functionality. Global shutter is key to techniques such as particle imaging velocimetry (PIV) and astronomical object tracking.</div><div></div><div></div><div>GPU Express - Simplify and optimize data transfer from the camera - ideal for today's data intensive imaging experiments. Leverage CUDA-enabled NVidia GPU processing to accelerate the data acquisition pipeline.</div><div></div><div></div><div></div><div></div><div>The illustration shows how a camera views the world. The camera is looking at light that comes from some light source, like the sun or a light bulb, that is reflected off the surface of the packaging and comes back into the camera. Traditional cameras capture the images of the outside of packaged items in well-lit environments but do not penetrate into surfaces.</div><div></div><div></div><div>There are ordinary cameras, which see in 2D. Then there are also 3D cameras, which are sometimes called depth cameras, that either use stereo vision or a technique called structured light to get a 3D view. But again, it's a 2D or a 3D view of the outside of packaged items.</div><div></div><div></div><div></div><div></div><div>Millimeter waves are radio waves that are human-safe and can be used to see through things. Millimeter waves are generated by radio transmitters in the sensor. The radio signal is emitted by the sensor, bounces off the packaging and comes back to the sensor. Using depth information, we get 3D information natively from the sensor which can be used to produce both 3D and 2D images.</div><div></div><div></div><div>Millimeter waves can penetrate non-metallic packaging materials such as corrugated cardboard, plastics, air packs, or wood going into the items that are inside and get reflected from the items inside. Those reflections are also collected by the sensor, giving the combined image of both the packaging and its contents.</div><div></div><div> 9738318194</div>

Back to comp.lang.basic.visual.misc | Previous | Next | Find similar

Thread

Wave Camera Software Free !NEW! Download Nancie Fazzari <fazzarinancie@gmail.com> - 2024-01-24 23:39 -0800

csiph-web