Groups > comp.graphics.apps.gnuplot > #4259

Re: 3D plot

From	Jörg Buchholz <bookwood4new@freenet.de>
Newsgroups	comp.graphics.apps.gnuplot
Subject	Re: 3D plot
Date	2019-11-01 14:33 +0100
Organization	A noiseless patient Spider
Message-ID	<qphc6s$okf$1@dont-email.me> (permalink)
References	(1 earlier) <qpedai$2he$1@dont-email.me> <qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me> <qpgmc5$pnb$1@dont-email.me> <qph1f6$mnj$1@dont-email.me>

Show all headers | View raw

On 01/11/2019 11:29, au76666 wrote:
> On Fri, 01 Nov 2019 08:20:41 +0100, Jörg Buchholz wrote:
> 
>> On 31.10.2019 15:27, Chris Elvidge wrote:
>>> On 31/10/2019 13:11, au76666 wrote:
>>>> On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:
>>>>
>>>>> On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:
>>>>>
>>>>>> I have this script:
>>>>>>
>>>>>> gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
>>>>>> set title 'CD, L = 1'
>>>>>> set xrange [0:1.0]
>>>>>> set yrange [0:1.0]
>>>>>> set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
>>>>>> set ylabel "Y"
>>>>>> set zlabel "cd"
>>>>>> unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi
>>>>>>
>>>>>> The result is here: http://dieterbritz.dk/CDL1.pdf
>>>>>>
>>>>>> 1. How do I move the x-axis labels (0, 0.5, 1) a bit
>>>>>>    lower down so that the 0.5 doesn't hit the base line?
>>>>>> 2. How do I lower the plot so that the zero level is right
>>>>>>    at the bottom?
>>>>>> 3 The orientation is not bad as is, but I tried to play with
>>>>>>    the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
>>>>>>    rotate=pi and there was an error with rotate. How is that done?
>>>>>
>>>>> I found out how to lower the whole plot. But that, as you can see now
>>>>> (same link) wiped out the zero axis marker for Z. Why is this?
>>>>> And I still want to know how to shift the X-axis numbers so that they
>>>>> don't touch the grid line.
>>>>
>>>> Forget it, I have worked around it.
>>>>
>>>>
>>>>
>>> Please tell ......
>>>
>>>
>> Nobody needs a "work around" for that. See help xtics and use the
>> "offset". It's simple.
>>
>> Jörg
> 
> I tried that and the numbers got shifted left but still touching
> the grid line. No doubt I have misread the specs.
> 

You can specify the offset for x y and z coordinates. For what do you
specify the offset?

Jörg

Back to comp.graphics.apps.gnuplot | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

3D plot Dieter Britz <dieterhansbritz@gmail.com> - 2019-10-29 09:30 +0000
  Re: 3D plot au76666 <britz@chem.au.dk> - 2019-10-31 10:33 +0000
    Re: 3D plot au76666 <britz@chem.au.dk> - 2019-10-31 13:11 +0000
      Re: 3D plot Chris Elvidge <chris@mshome.net> - 2019-10-31 14:27 +0000
        Re: 3D plot Jörg Buchholz <bookwood4new@freenet.de> - 2019-11-01 08:20 +0100
          Re: 3D plot au76666 <britz@chem.au.dk> - 2019-11-01 10:29 +0000
            Re: 3D plot Jörg Buchholz <bookwood4new@freenet.de> - 2019-11-01 14:33 +0100
              Re: 3D plot au76666 <britz@chem.au.dk> - 2019-11-01 14:11 +0000
                Re: 3D plot Jörg Buchholz <bookwood4new@freenet.de> - 2019-11-01 16:50 +0100
        Re: 3D plot au76666 <britz@chem.au.dk> - 2019-11-01 10:36 +0000

csiph-web