Re: Need v.90 Feature Enable Key for USR Courier External

From	Ken Whiton <kenwhiton@surfglobal.net.INVAL>
Newsgroups	comp.dcom.modems
Subject	Re: Need v.90 Feature Enable Key for USR Courier External
Date	2014-05-25 05:23 -0400
Organization	NewsGuy - Unlimited Usenet $23.95
Message-ID	<llscqq025ub@news4.newsguy.com> (permalink)
References	<AWNv6.1410$8c6.258719762@newssvr10-int.news.prodigy.com> <b029a186-1a21-4865-bfc6-9883a78e5db9@googlegroups.com>

Show all headers | View raw

*-* On Tue, 20 May 2014, at 14:14:39 -0700 (PDT),
*-* In Article <b029a186-1a21-4865-bfc6-9883a78e5db9@googlegroups.com>,
*-* leoborealis@gmail.com wrote
*-* About Re: Need v.90 Feature Enable Key for USR Courier External

> Long dead topic but... just recently purchased an old Courier
> V.Everything 33.6 and wonder... which file on USR ftp site
> (ftp.usr.com) is the enable key to unlock X2 and V.90?

           Probably none of them.  As one of the old posts in this
thread stated, that key cost US$60.  It wasn't downloadable.  You had
to call the USR BBS, and once it was confirmed that you had purchased
the key the BBS would install it into your modem.  Since then there
have been at least two changes in USR's ownership, with resulting
changes in support policy.

> ati7
> USRobotics Courier V.Everything Configuration Profile...

> Product type           US/Canada External
> Options                HST,V32bis,Terbo,VFC,V34+
> Fax Options            Class 1,Class 2.0
> Clock Freq             20.16Mhz
> Flash ROM              512k
> Ram                    64k

> Supervisor date        03/13/98
> DSP date               03/13/98

> Supervisor rev         7.3.14
> DSP rev                3.0.13

> Serial Number          30XOBBN6QWBZ

> OK

      Except for x2, V90, and serial number, that's identical to mine
(copied and pasted from a May, 1998, newsgroup post).

ATI7
USRobotics Courier V.Everything Configuration Profile...

Product type           US/Canada External
Options                HST,V32bis,Terbo,VFC,V34+,x2,V90
Fax Options            Class 1,Class 2.0
Clock Freq             20.16Mhz
Flash ROM              512k
Ram                    64k

Supervisor date        03/13/98
DSP date               03/13/98

Supervisor rev         7.3.14
DSP rev                3.0.13

Serial Number          0009550011323396

OK

                                         Ken Whiton
-- 
     FIDO: 1:132/152
InterNet: kenwhiton@surfglobal.net.INVAL (remove the obvious to reply)

Back to comp.dcom.modems | Previous | Next — Previous in thread | Find similar

Thread

Re: Need v.90 Feature Enable Key for USR Courier External leoborealis@gmail.com - 2014-05-20 14:14 -0700
  Re: Need v.90 Feature Enable Key for USR Courier External Gary A. Edelstein <edelsgNO@SPAMyahoo.com.invalid> - 2014-05-20 17:09 -0500
    Re: Need v.90 Feature Enable Key for USR Courier External leoborealis@gmail.com - 2014-05-21 06:32 -0700
      Re: Need v.90 Feature Enable Key for USR Courier External "R.L. Horn" <news@eastcheap.org> - 2014-05-22 12:42 -0500
  Re: Need v.90 Feature Enable Key for USR Courier External Gary A. Edelstein <edelsgNO@SPAMyahoo.com.invalid> - 2014-05-20 17:20 -0500
  Re: Need v.90 Feature Enable Key for USR Courier External Ken Whiton <kenwhiton@surfglobal.net.INVAL> - 2014-05-25 05:23 -0400

csiph-web