Path: csiph.com!news.mixmin.net!aioe.org!gothmog.csi.it!bofh.it!news.nic.it!robomod From: Paul Kocialkowski Newsgroups: linux.kernel Subject: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply Date: Sun, 18 Sep 2016 16:20:01 +0200 Message-ID: X-Original-To: linux-kernel@vger.kernel.org X-Mailer: git-send-email 2.9.3 Sender: robomod@news.nic.it List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Approved: robomod@news.nic.it Lines: 36 Organization: linux.* mail to news gateway X-Original-Cc: linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Alexandre Courbot , Thierry Reding , Stephen Warren , Paul Kocialkowski X-Original-Date: Sun, 18 Sep 2016 16:13:11 +0200 X-Original-Message-ID: <20160918141311.17140-1-contact@paulk.fr> X-Original-Sender: linux-kernel-owner@vger.kernel.org Xref: csiph.com linux.kernel:1485813 This enables the GPU node for tegra124 nyan boards, which is required to get graphics acceleration with nouveau on these devices. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index dab9509..225ca77 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.9.3