Path: csiph.com!news.mixmin.net!aioe.org!gothmog.csi.it!bofh.it!news.nic.it!robomod From: John Garry Newsgroups: linux.kernel Subject: [PATCH 11/15] hisi_sas: fix HBA SAS addr endianness for v1 hw Date: Tue, 06 Sep 2016 17:30:02 +0200 Message-ID: References: X-Original-To: , X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.67.212.75] X-Cfilter-Loop: Reflected X-Mirapoint-Virus-Rapid-Raw: score=unknown(0), refid=str=0001.0A020203.57CEDF89.03CA,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1,fgs=0, ip=0.0.0.0, so=2013-05-26 15:14:31, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-ID: 07ecf5d8885d97dfd33d9b34850a4859 Sender: robomod@news.nic.it List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Approved: robomod@news.nic.it Lines: 42 Organization: linux.* mail to news gateway X-Original-Cc: , , , , , , John Garry , "Xiang Chen" X-Original-Date: Tue, 6 Sep 2016 23:36:21 +0800 X-Original-Message-ID: <1473176185-217808-12-git-send-email-john.garry@huawei.com> X-Original-References: <1473176185-217808-1-git-send-email-john.garry@huawei.com> X-Original-Sender: linux-kernel-owner@vger.kernel.org Xref: csiph.com linux.kernel:1477520 The endianness for the SAS address in the TX_ID_DWORD registers is set incorrectly. We see errors like this in the boot log for v2 hw (which would have the same issue as v1 hw): [ 7.583284] sas: target proto 0x0 at 50000d1108e7923f:0x1f not handled This is due to the host SAS addr not matching the PHY SAS addr in the expander host-attached phy discovery responses. To fix, we byte swap the SAS addr from BE to LE (which is the endianness of the SAS controller). Signed-off-by: John Garry Signed-off-by: Xiang Chen --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index b537464..c030df0 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -490,13 +490,13 @@ static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no) hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0, __swab32(identify_buffer[0])); hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1, - identify_buffer[2]); + __swab32(identify_buffer[1])); hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2, - identify_buffer[1]); + __swab32(identify_buffer[2])); hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3, - identify_buffer[4]); + __swab32(identify_buffer[3])); hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4, - identify_buffer[3]); + __swab32(identify_buffer[4])); hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5, __swab32(identify_buffer[5])); } -- 1.9.1