Path: csiph.com!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail From: Christian Zietz Newsgroups: de.sci.electronics Subject: Re: SOT23 von Hand l??ten Date: Sun, 9 Apr 2017 11:11:34 +0200 Lines: 23 Message-ID: References: <8v6prd-fi4.ln1@criseis.ruhr.de> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-Trace: individual.net PUJ2iDMQtZVI6qM5OSD2zAnWwitKrhcYLCwKZfza81Gj9K4w== Cancel-Lock: sha1:nDnvcCw40BLVF3teiNSGita3ea0= User-Agent: Mozilla/5.0 (Windows NT 6.0; WOW64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 In-Reply-To: Xref: csiph.com de.sci.electronics:225930 Olaf Schultz schrieb: > IIRC ist bei den älteren Micromastern auch eine Anleitung bei, die Elkos > erst langsam auf Nennspannung hochzufahren... Nichicon schreibt: | A voltage treatment is recommended when using | a capacitor stored for a long period of time. The treatment | for an individual capacitor is accomplished by charging | up to its rated voltage through a resistance of about 1 kΩ | and applying the voltage for approximately 30 minutes. | When a capacitor is already built into an appliance, [...] | [i]f the voltage is not adjustable, turn on the switch and let it | run for about thirty minutes while confirming if the device | complies with the specifications. Then turn off the switch | before using the capacitor for practical applications. Christian -- Christian Zietz - CHZ-Soft - czietz (at) gmx.net WWW: http://www.chzsoft.de/ PGP/GnuPG-Key-ID: 0x52CB97F66DA025CA / 0x6DA025CA