Path: csiph.com!x330-a1.tempe.blueboxinc.net!usenet.pasdenom.info!goblin3!goblin2!goblin.stu.neva.ru!feeder1.cambriumusenet.nl!feed.tweaknews.nl!94.232.116.15.MISMATCH!ramfeed-1.ams.xsnews.nl!feed.xsnews.nl!border-1.ams.xsnews.nl!newspump.sol.net!post2.nntp.sol.net!posts.news.twtelecom.net!nnrp3.twtelecom.net!not-for-mail From: Francisco Gutierrez Newsgroups: comp.soft-sys.math.mathematica Subject: Re: iteration question Date: Sat, 5 Nov 2011 09:47:51 +0000 (UTC) Organization: Steven M. Christensen and Associates, Inc and MathTensor, Inc. Sender: steve@smc.vnet.net Approved: Steven M. Christensen , Moderator Message-ID: References: <201111030843.DAA15129@smc.vnet.net> Reply-To: Francisco Gutierrez Lines: 67 NNTP-Posting-Date: 05 Nov 2011 08:51:48 GMT NNTP-Posting-Host: 3d865800.news.twtelecom.net X-Trace: DXC=oAoMZ8NUGH8B8ck_2OIRd8C_A=>8kQj6==_1NR_H?JP=Te8cX:a0\@4EFiONJ7[Go6EN89HhAXf51 X-Complaints-To: abuse@twtelecom.net Xref: x330-a1.tempe.blueboxinc.net comp.soft-sys.math.mathematica:6209 Many thanks to Szabolcs, Wolfgang, and Oleksandr for their valuable answers to my query. All very clear, and worked well. Best, Francisco ________________________________ From: Oleksandr Rasputinov Sent: Thursday, November 3, 2011 3:43 AM Subject: Re: iteration question On Wed, 02 Nov 2011 11:25:28 -0000, Francisco Gutierrez  wrote: > Dear Group: > > I have a function, and I iterate it using fixedpoint. Something of this sort: > > FixedPointList[ >  function[arg1,arg2,arg3, #] &, arg4, >  SameTest -> (Max[Abs[Flatten[#1] - Flatten[#2]]] < 0.01 &)] > > > I would like to know how many steps it takes this function to converge. > I have tried with EvaluationMonitor to no avail: > > Block[{veamos, c = 0}, >  veamos = FixedPoint[ >    function[arg1,arg2,arg3, #] &, arg4, >    SameTest -> (Max[Abs[Flatten[#1] - Flatten[#2]]]< 0.01 &)]; >  EvaluationMonitor :> c++; {veamos, c}] > > > The iterator c simply does not move, and the previous function works ok > but returns the value of c as 0. > > I tried if this was true with Length[FixedPointList[...]] and the answer > was 20 (which should be the value of c in the immediately previous > function). In principle, this would solve my problem, but it seems > rather inefficient, especially when the convergence criterion is severe > (not 0.01, but say 10^-4). > > Is there an efficient and nice way to solve this? > > Thanks, > > Francisco FixedPoint doesn't accept the option EvaluationMonitor, so this approach is a dead end. You could insert your counter into the SameTest; the number of comparisons will be one more than the number required to achieve convergence. However, I don't think this is likely to gain you very much; Length@FixedPointList[...] will not incur a noticeable efficiency penalty in most cases as building up a list of values is a fairly lightweight operation. Another approach, of course, would be to use a While loop. In regard to your SameTest: you may need to be careful with comparisons of this sort where the absolute function values are large and the tolerance is small since, due to the properties of floating-point numbers, the relative error in this case may become arbitrarily small without the absolute error necessarily falling below the value required for convergence. Assuming that you're working in machine precision, you may be better off using something along the lines of SameTest -> (val = Max[Abs[Flatten[#1] - Flatten[#2]]]; val < tol + val*Sqrt[$MachineEpsilon] &) where tol is your chosen tolerance.