Path: csiph.com!v102.xanadu-bbs.net!xanadu-bbs.net!feeder.erje.net!eu.feeder.erje.net!news.swapon.de!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail From: "Wolfgang Riedmann" Newsgroups: comp.lang.clipper.visual-objects Subject: Re: Labelprinter Intermec PC43D doesn't print from ReportPro Date: Sat, 28 Feb 2015 10:28:02 +0100 Lines: 36 Message-ID: References: X-Trace: individual.net hlCgItiNC3GWFViOrkwhPwbu/GvhP5TV9tBzNGu+sB6/GdyDw= Cancel-Lock: sha1:W3tVaw+6SoXFl26qkoU2pe0jpO8= User-Agent: XanaNews/1.18.1.6 Xref: csiph.com comp.lang.clipper.visual-objects:7815 Hi Dick, when using these sort of printers, you are best advised to use their native language to use their full printing speed. Using the bypass function of the printer driver you can do this without using direct FOpen()/FWrite()/FClose() of the COM or LPT port. Wolfgang D.J.W. van Kooten wrote: > A new client from us has a labelprinter Intermec PC43D. From a > specific program for it they can print labels. From my ReportPro > custom label report (ran on the same PC) it doesn't print anything > after clicking Print. > > What seems odd is that on the properties you can see a user defined > format is set but although the width is correct, the length is way off > (should be 54,3 mm and shows as 127). You can change the size from the > driver properties but then it still doesn't print. > > I have the impression that it may be only usuable with that specific > program. On the other hand, you do see it as a regular Windows > printer. In my experience, anything defined wrong in a .rpt usually > doesn't prevent it from printing, although it just doesn't fit as it > should. > > Does anyone have an idea what I could do in ReportPro? Or even know > how to handle this specific printer? > > Dick --